MOXA EDR-G9010
8 GbE copper + 2 GbE SFP multiport industrial secure router
- All-in-one firewall/NAT/VPN/router/switch with 10 GbE ports
- Secure remote access tunnel with VPN
- Stateful firewall protects critical assets
- Inspect industrial protocols with PacketGuard technology
- Easy network setup with Network Address Translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- Security features based on IEC 62443/NERC CIP
- Supports secure boot for checking system integrity
- Check firewall settings with the intelligent SettingCheck feature
- -40 to 75°C operating temperature range (-T model)
The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC/SCADA systems in factory automation.
Defend Against Malicious Threats With Advanced Cybersecurity Features
The EDR-G9010 Series’ embedded firewall uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. To help protect your OT assets from cyberattacks, the EDR-G9010 Series supports Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.
Simplify Configurations With the User-friendly Interface and Quick Settings
The EDR-G9010 Series’ “Interface Type Quick Settings” provide an easy way for users to set up WAN, LAN, and Bridge ports for routing functionality in just four steps. In addition, the “Quick Automation Profile” feature gives engineers a simple way to configure the firewall filtering function for general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET.
Industrial-grade Design to Ensure Uninterrupted Network Connectivity
The EDR-G9010 Series’ rugged hardware makes these secure routers ideal for harsh industrial environments, featuring wide-temperature models that are built to operate reliably in hazardous conditions and extreme temperatures of -40 up to 75°C. Moreover, the EDR-G9010 Series supports comprehensive Layer 2 and Layer 3 redundancy mechanisms to ensure that your network stays connected at all times.
Specifications
- Input/OutputInterface
- Alarm Contact Channels
Resistive load: 1 A @ 24 VDC
Buttons
Reset button
Digital Input Channels
+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
Ethernet Interface
- 10 / 100 / 1000 BaseT(X) Ports (RJ45 connector)
8
1000Base SFP Slots
2
Standards
IEEE 802.1Q for VLAN Tagging
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
Static Port Trunk
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
Ethernet Software Features
- Broadcast Forwarding
IP directed broadcast, broadcast forwarding
Management
Back Pressure Flow Control, DDNS, DHCP Server/Client,
Web Console (HTTP/HTTPS), LLDP, QoS/CoS/ToS,
SNMPv1/v2c/v3, Telnet, TFTP, HTTPS, SSH
Redundancy Protocols
RSTP, STP, Turbo Ring v2
Routing
Throughput: 350K packets per second (max. 1500 Mbps)
Routing Table
Max. 4K routing rules
Concurrent Connections
Max. 400K
Connections Per Second
Max. 20K
Routing Redundancy
VRRP
Security
Secure Boot, IPsec, L2TP (server), RADIUS, Trust access control
Time Management
NTP Server/Client, SNTP
Unicast Routing
OSPF, RIPV1/V2, Static Route
Multicast Routing
Static Route
Filter
IGMP v1/v2/v3
Switch Properties
- VLAN ID Range
VID 1 to 4094
IGMP Groups
256
Max. No. of VLANs
16
LED Interface
- LED Indicators
PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB
DoS and DDoSProtection
- Technology
ARP-Flood, FIN Scan, ICMP-Death, NEWWithout-SYN Scan,
NMAP-ID Scan, NMAP-Xmas Scan, Null Scan, SYN/FIN Scan,
SYN/RST Scan, SYN-Flood, Xmas Scan
Firewall
- Filter
DDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports
Quick Automation Profiles
DNP, EtherCAT, EtherNet/IP, FOUNDATION Fieldbus,
FTP, HTTP, IEC 60870-104, IPsec, L2TP, LonWorks,
Modbus TCP, PPTP, PROFINET, RADIUS, SSH, Telnet
Stateful Inspection
Router firewall
Transparent (bridge) firewall
Deep Packet Inspection
Additional protocols will be supported through future firmware updates.
Throughput
Max. 350K packets per second (max. 1500 Mbps)
IP sec VPN
- Authentication
MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate
Concurrent VPN Tunnels
Max. 250 IPsec VPN tunnels
Encryption
DES, 3DES, AES-128, AES-192, AES-256
Protocols
IPsec, L2TP (server), PPTP (client)
Throughput
Max. 300 Mbps (Conditions: AES-256, SHA-256)
NAT
- Features
1-to-1, N-to-1, Port forwarding
Event Type
Firewall event, VPN event
Media
Local storage, SNMP Trap, Syslog server
Serial Interface
- Console Port
RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
Connector
USB Type-C
PowerParameters
- Connection
Removable terminal block
Input Voltage
12 / 24 / 48 VDC
Input Current
1.51 A @ 12 VDC
0.70 A @ 24 VDC
0.35 A @ 48 VDC
Reverse Polarity Protection
Supported
Physical Characteristics
- Housing
Metal
Dimensions
58 x 135 x 105 mm (2.28 x 5.31 x 4.13 in)
Weight
1030 g (2.27 lb)
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
- Safety
UL 62368-1
EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Railway
EN 50121-4
Traffic Control
NEMA TS2
Maritime
IEC 60945
Power Substation
IEEE 1613, IEC 61850-3 Edition 2.0
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
- Time
1,080,807 hrs
Standards
Telcordia (Bellcore), GB
ORDERING INFORMATION
Available Modules | |
EDR-G9010-VPN-2MGSFP | Operating Temp. -10 to 60°C |
EDR-G9010-VPN-2MGSFP-T | Operating Temp. -40 to 75°C |
Accessories (sold separately) Storage Kits | |
ABC-02-USB | Configuration backup and restoration tool, firmware upgrade ,and log file storage tool for managed Ethernet switches and routers,0 to 60°C operating temperature |
ABC-02-USB-T | Configuration backup and restoration tool, firmware upgrade ,and log file storage tool for managed Ethernet switches and routers,-40 to 75°C operating temperature |
SFP Modules | |
SFP-1G10ALC | WDM-type (BiDi) SFP module with 1 1000 Base SFP port with LC connect or for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G10ALC-T | WDM-type (BiDi) SFP module with 1 1000 Base SFP port with LC connect or for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G10BLC | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 10 km transmission;TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
SFP-1G10BLC-T | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 10 km transmission;TX 1550 nm, RX 1310nm, -40 to 85°C operating temperature |
SFP-1G20ALC | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connectorfor 20 km transmission;TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G20ALC-T | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 20 km transmission;TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G20BLC | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 20 km transmission;TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
SFP-1G20BLC-T | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 20 km transmission;TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
SFP-1G40ALC | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 40 km transmission;TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G40ALC-T | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 40 km transmission;TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G40BLC | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 40 km transmission;TX 1550 nm, RX 1310nm, 0 to 60°C operating temperature |
SFP-1G40BLC-T | WDM-type(BiDi)SFP module with 1 1000Base SFP port with LC connector for 40 km transmission;TX1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
SFP-1GEZXLC | SFP module with 1 1000Base EZX port with LC connector for 110 km transmission,0 to 60°C operating temperature |
SFP-1GEZXLC-120 | SFP module with 1 1000Base EZX port with LC connector for 120 km transmission,0 to 60°C operating temperature |
SFP-1GLHLC | SFP module with 1 1000Base LH port with LC connector for 30 km transmission,0 to 60°C operating temperature |
SFP-1GLHLC-T | SFP module with 1 1000Base LH port with LC connector for 30 km transmission,-40 to 85°C operating temperature |
SFP-1GLHXLC | SFP module with 1 1000Base LHX port with LC connector for 40 km transmission,0 to 60°C operating temperature |
SFP-1GLHXLC-T | SFP module with 1 1000Base LHX port with LC connector for 40 km transmission,-40 to 85°C operating temperature |
SFP-1GLSXLC | SFP module with 1 1000Base LSX port with LC connector for 1km/2km transmission,0 to 60°C operating temperature |
SFP-1GLSXLC-T | SFP module with 1 1000Base LSX port with LC connector for 1km/2km transmission,-40 to 85°C operating temperature |
SFP-1GLXLC | SFP module with 1 1000Base LX port with LC connector for 10 km transmission,0 to 60°C operating temperature |
SFP-1GLXLC-T | SFP module with 1 1000Base LX port with LC connector for 10 km transmission,-40 to 85°C operating temperature |
SFP-1GSXLC | SFP module with 1 1000Base SX port with LC connector for 300m/550m transmission,0 to 60°C operating temperature |
SFP-1GSXLC-T | SFP module with 1 1000Base SX port with LC connector for 300m/550m transmission,-40 to 85°C operating temperature |
SFP-1GZXLC | SFP module with 1 1000Base ZX port with LC connector for 80 km transmission,0 to 60°C operating temperature |
SFP-1GZXLC-T | SFP module with 1 1000Base ZX port with LC connector for 80 km transmission,-40 to 85°C operating temperature |
SFP-1GTXRJ45-T | SFP module with 1 1000Base T port with RJ45connector for 100 m transmission,-40 to 75°C operating temperature |
Mounting Kits (sold separately) | |
WK-35-01 | Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm) and 6 screws |
Software (sold separately) | |
MXview-50 | Industrial network management software with a license for 50 nodes(by IP address) |
MXview-100 | Industrial network management software with a license for 100 nodes(by IP address) |
MXview-250 | Industrial network management software with a license for 250 nodes(by IP address) |
MXview-500 | Industrial network management software with a license for 500 nodes(by IP address) |
MXview-1000 | Industrial network management software with a license for 1000nodes(by IP address) |
MXview-2000 | Industrial network management software with a license for 2000nodes(by IP address) |
MXview Upgrade-50 | License expansion of MXview industrial network management software by 50 nodes(by IP address) |
Kunden, die diesen Artikel gesehen haben, sahen auch