Barix Annuncicom PS Touch

The Barix Paging Station Annucicom PS Touch is a universal, TCP/IP connected intercom station for use in IP Intercom, Paging and VoIP applications. The PS Touch directly connects to the network via a 10/100Mbps network connection, and is powered over the network interface (PoE, 802.3af standard). The station can be used as a master station for IP based intercom and paging systems, which can be built without any central servers or PCs.

The PS Touch is equipped with a touch screen display, an XLR connected professional gooseneck microphone and a built-in speaker. Optional flash memory for stored messages and announcements is available. It replaces the PS 16 (see discontinuance notice). Annuncicom PS Touch is delivered with Barix Simple Paging Master station firmware. Additional firmware support on request.

Technical Specifications

Power Supply Input


• Powered over the network interface (PoE, 802.3af standard).
1 Ethernet Interfaces
• RJ45 10/100 auto detect, IPv4, IPv6
• TCP/IP, RTP, UDP, ICMP, DHCP, SNMP



Audio Input


• XLR microphone connector with 13 Volt bias voltage



Audio output


• 5-Watt output speaker



Touch Screen


• 10.1” size
• Touch type: capacitive
• 1024x600 pixel resolution
• backlight LED >30,000 hours
• > 1 million touches



Barix solution support


• Supports Barix Simple Paging
• IC Paging on request at order
• SIP on request



HW/SW environment


• Barix IPAM302
• Simple Paging firmware preinstalled



User Interface


• Web interface for control, status and configuration



Case


• Metal
• ~350x250x150mm (13.8x9.8x5.9 inch) without microphone
• 2500g



MTBF


• 30’000 hours