TERZ NITE-RF Gigabit Ethernet
Unmanaged Industrial Ethernet Switch RJ45
Full Gigabit Ethernet
- Flexible use with 24 VAC/VDC
- 9 kB Jumbo Frames Support
- Minimal installation depth 32.5 mm
- Inrush current limitation
- Temperature range -40 to +70°C
- Stable mounting on 35mm DIN rail
- Polarity protection
- PROFINET suitable
Mit nur 32,5 mm Einbautiefe und einer Höhe von 105 mm, überzeugen die NITE-RF Switches durch ihre extrem flachen und hochwertigen Gehäuse aus Aluminium. Die ultrakompakten Switches sind durch die Spannungsversorgung mit 24 VAC/VDC mit Einschaltstrombegrenzung und Verpolungsschutz in jedem Schaltschrank einsetzbar. Durch den reduzierten Platzbedarf und die Anordnung aller Anschlüsse auf der Vorderseite, können Schaltschränke und Verkabelung optimiert werden. Die Hutschienenmontage aus Metall gewährleistet einen festen und sicheren Halt. Wie alle TERZ Industrial Ethernet Switches sind auch die flachen NITE-RF durch zwei Frame Forwarding Varianten voll PROFINET geeignet.
SPECIFICATION
- General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
9,216 Bytes Jumbo Frames
MAC table size:
2,000 addresses
Quality of Service:
Yes – 8 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (RJ45) | 5 | 8 |
MTBF (SN 29500, Mio. h) |
n.a. | n.a. |
Frame Forwarding (Art.-No.) | xxxxx0 | xxxxx1 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding | Blocking |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding | Forwarding |
Ethernet Interfaces
- IEEE Standards:
802.3 10Base-T, 100Base-TX, 1000Base-T
Isolation:
0.75 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
RJ45
Port Count | Speed:
5,8 Ports | 10/100/1000 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
Power supply / electronics
- Nominal voltage:
Vin 24 VAC 50/60 Hz / 24 VDC
Permitted voltage range:
12 to 28 VAC / 9 to 36 VDC
Connection type:
3-pole pluggable, screw connector (+ - FE)
Wire cross-section:
0.75 to 2.5 mm² (AWG 20 to 13)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
PCB Conformal Coating:
No
Protection category:
III
Isolation:
0.75 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Port count (RJ45) | 5 | 8 | |
Power usage (W) Min | Max |
@24VAC @24VAC |
1,5 | 3,2 1,5 | 3,5 |
1,6 | 3,5 1,6 | 3,9 |
Input current (mA) Min | Max |
@24VAC @24VAC |
60 | 130 60 | 145 |
130 | 270 130 | 295 |
Inrush current (A) | 16 | 16 |
Mechanical properties
- Housing material:
Anodised aluminium, stainless steel
Mounting:
35mm DIN rail
IP Protection class (operation):
IP30
Port count (RJ45) | 5 | 8 |
Width (mm) | 42 | 58 |
Height (mm) | 105 | 105 |
Depth (mm) | 32,5 | 32,5 |
Weight (g) | 205 | 255 |
EMC and environmental specifications
- Operating temperature:
-40°C to 70°C
Storage temperature:
-40°C to 85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 61000-6-2, 55024
EMC radiated emission:
DIN EN 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Approvals and certifications
- CE, DIN EN 60950-1, Listed UL 61010 (US/CA)
Status and diagnostic indicators
- LED:
Link/Activity/Speed per Port
ORDERING INFORMATION
Available Modules | ||
Article | Art.-No. | Specification |
NITE-RF5-2100 | 121400 | 5xRJ45, IP30, GE |
NITE-RF8-2100 | 121600 | 8xRJ45, IP30, GE |
NITE-RF5-2101 | 121401 | 5xRJ45, IP30, GE, LLDP Blocking |
NITE-RF8-2101 | 121601 | 8xRJ45, IP30, GE, LLDP Blocking |
Clients qui ont dájà consulté cet article ont également vu