Advantech PCIE-1813
38.4 kS/s, 26-Bit, 4-Ch, Simultaneous Sampling,
Universal Bridge Input, Multifunction PCI Express Card




- 4 simultaneous sampling analog inputs, up to 38.4 kS/s, 26-bit resolution
- Full, half, and quarter-bridge sensor input with built-in anti-aliasing filter
- 2 analog outputs, up to 3 MS/s, 16-bit resolution
- Four 32-bit programmable encoder counters/ timers/ encoder counters
- 32 programmable DI/Os with interrupt functions
- Board ID switch
- Full automatic calibration
PCIE-1813 is a 26-bit high-resolution multifunction data acquisition PCI Express card
specifcally designed for bridge sensor inputs, such as strain gauges, load cells,pressure
sensors, and torque sensors. PCIE-1813 also features2-ch, 16-bit analog outputs with waveform
generation capability and supports simultaneous waveform generation and analog input functions
specifcally designed for bridge sensor inputs, such as strain gauges, load cells,pressure
sensors, and torque sensors. PCIE-1813 also features2-ch, 16-bit analog outputs with waveform
generation capability and supports simultaneous waveform generation and analog input functions

Specifications
Analog Input Overview
Voltage Input
Bridge Input
Analog Output
Analog Trigger
Digital Trigger
Digital I/O
Counter/Timer/Encder Counter
General
Ordering Information
Accessories
Analog Input Overview
| Channels | 4 |
| Resolution | 26 bits |
| Sample Rate | 38,4kS7s max. simultaneous |
Voltage Input
| Input Ranges | +-10V,+-5V,+-2,5V,+-1,25V,+-625mV,+-312,5mV |
| Accuracy | +-0,01& of FSR |
Bridge Input
| Input Ranges | +-31,25mV/V,+-62,5mV7V,+-125mV/V,+-250 mV/V,+-500mV/V and +-1V/V |
| Bridge Mode | Full, half, quarter |
| Bridge Resistance | 120Ω,350Ω,1kΩ |
| Shunt Calibration | 33,333kΩ,50kΩ,100kΩ |
| Exccilation Voltage | 0 ~ 10V |
| Remote Sensing | Yes |
Analog Output
| Channels | 2 | |
| Resolution | 16bits | |
| Output Rate | 3 MSPS max. | |
| Output Range | Software programmable |
Internal Refernce | Unipolar | 0 ~ 5V, 0 ~ 10V |
| Bipolar | -5V ~ 5V,-10V ~ 10V | |
| External Refernce | 0 ~ +xV@-xV (-10 |
| Slew Rate | 20 V/µs |
| Driving Capability | 5mA |
| Operation Mode | Static update, waveform generation |
| Accuracy | +- 0,01% of FSR |
Analog Trigger
| Channels | 2 |
| Resolution | 16 bits |
| Input Range | -10V ~ +10V |
| Hysteresis | Yes, Hysteresis range is confiurable |
| Trigger Edge | Rising Edge or falling edge, selected by Software |
Digital Trigger
| Channels | 2 |
| Input Voltage | Logic 0: 1,5V max. Logic 1: 3,5V max |
| Trigger Edge | Rising Edge or falling edge, selected by software |
Digital I/O
| Channels | 32 (shared) |
| Iput Voltage | Logic 0: 1,5V max. Logic 1: 3,5V min. |
| Output Voltage | Low 0,5V max@+20mA (sink) High 4,5V min@-20mA (source) |
Counter/Timer/Encder Counter
| Channels | 4 |
| Resolution | 32 bits |
| Input/Output Voltage | Same as that for digital I/O |
| Max. input Frequency | 10 MHz |
| Counter/Timer Functions | Frequency measurement, pulse width measurement, pulse output, PWM output |
| Encoder Functions | Quadrature (X1,X2,X4) dual pulse (CW/CCW) signed pulse (OUT/DIR) |
General
| Form Factor | PCI Express x1 |
| I/O Connector | 100-pin SCSI female ribbon-type connector |
| Dimensions(LxW) | 167x100mm (6,6"x3,9") |
| Operating Temperature | 0 ~ 60°C (32 ~ 140°F)(refer to IEC 68-2-1,2) |
| Storage Temperature | -40 ~ 70°C(-40 ~ 158°F) |
| Storage Humidity | 5 ~ 95%RH, non-condensing (refer to IEC68-2-3) |
| Board ID | TM Switch |
Ordering Information
| PCIE-1813-AE | 38,4kS/s,26-bit,4-ch, simultaneous sampling iniversal bridge input, multifunction PCI Express card |
Accessories
| PCL-101100R-1E | 100-pin SCSI shielded cable, 1m |
| PCL-101100R-2E | 100-pin SCSI shielded cable, 2m |
| ADAM-39100-BE | 100-PIN DIN rail SCSI wiring board |
| PCLD-8810-AE | Low-Pass Active Filter Board |
| PCLD-8813-AE | 6 Advanced Signal Conditioning Board for PCIE-1812/PCIE/1813 |
| PCLD-8811-AE | Low-Pass Active Filter Boar |
I clienti che hanno visto questo prodotto hanno anche consultato












proprietà
descrizione
further informazioni



proprietà
descrizione
PDF