Advantech BB-WDR-240-24
240W, 24V, 10A, Single Output, Industrial DIN Rail Power Supply
Les caractéristiques
Présentation
Plus d'information
Voir les produits similaires
Imprimer la fiche produit
Demander votre devis
Votre liste de demandes de devis
PDF
Les caractéristiques
Présentation
Plus d'information
PDF
- Single and two phase 180~550VAC wide input range
- High efficiency 91% and low power dissipation
- Protections: Short-circuit, Overload, Over-voltage, Over-temperature
- Free air convection cooling
- DIN rail TS-35/7.5 or 15 mountable
- UL508 approved (industrial control equipment)
- EN61000-6-2 (EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full-load burn-in test
240W, 24V, 10A, Single Output, Industrial DIN Rail Power Supply
SPECIFICATIONS
| MODEL | BB-WDR-240-24 | |
| OUTPUT | ||
| DC VOLTAGE | 24V | |
| RATED CURRENT | 10A | |
| CURRENT RANGE | 0 ~ 10A | |
| RATED POWER | 240W | |
| RIPPLE & NOISE (max.) Note.2 | 150 mVp-p | |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | |
| VOLTAGE TOLERANCE Note.3 | ± 1.0% | |
| LINE REGULATION | ± 0.5% | |
| LOAD REGULATION | ± 1.0% | |
| SETUP, RISE TIME | 800ms, 150ms/400VAC 1500ms, 150ms/230VAC at full load | |
| HOLD UP TIME (Typ.) | 18ms / 400VAC 18ms / 230VAC at full load | |
| INPUT | ||
| VOLTAGE RANGE | 180 ~ 550VAC 254 ~ 780VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| POWER FACTOR (Typ.) | PF≥0.84/400VAC PF≥0.84/230VAC | |
| EFFICIENCY (Typ.) | 91% / 400V | |
| AC CURRENT | 1A/400VAC 2A/230VAC | |
| INRUSH CURRENT (max.) | COLD START 50A | |
| LEAKAGE CURRENT | <3.5mA / 530VAC | |
| PROTECTION | ||
| OVERLOAD | 105 ~ 130% rated output power | |
| Protection type : Constant current limiting, unit will shut down after 3 sec. , auto-recovery after 1 minute if the fault condition is removed | ||
| OVER VOLTAGE | 29 ~ 33V | |
| Protection type : Shut down o/p voltage, auto-recovery after 1 minute if the fault condition is removed | ||
| OVER TEMPERATURE | 90°C ± 5°C (TSW) detect on heatsink of power switch | |
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
| FUNCTION | ||
| DC OK SIGNAL | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
| ENVIRONMENT | ||
| WORKING TEMP. | -30 ~ +70 °C (Refer to "Derating Curve") | |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40 ~ +85 °C, 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ± 0.03%/ °C (0 ~ 50°C) | |
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6 | |
| SAFETY & EMC (Note 4) | ||
| SAFETY STANDARDS | Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25 °C/ 70% RH | |
| EMC EMISSION | Compliance to EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A approved | |
| OTHERS | ||
| MTBF | 141.1K hrs min MIL-HDBK-217F (25 °C) | |
| DIMENSION | 63*125.2*113.5mm (W*H*D) | |
| PACKING | 1.06Kg; 12pcs/13.7Kg/1.06CUFT | |
| NOTE |
|
|
Clients qui ont dájà consulté cet article ont également vu