TERZ SPARK-XS Serie
Industrial Power over Ethernet Switches 12 IP65/67
- Power and Data over one cable
- compact, ruggedized, maximum efficiency
Die SPARK-XS PoE Switches ermöglichen die Versorgung von bis zu 6 Endgeräten mit Energie und Daten. Durch die Reduzierung des Anschlusses auf nur ein Kabel und Einsparung von zusätzlichen Netzteilen können die Kosten, der Installationsaufwand und der Platzbedarf reduziert werden. Die Switches arbeiten nach dem IEEE Standard 802.3at als Type 1 Power Sourcing Equipment (PSE) und versorgen die angeschlossenen Endgeräte mit bis zu 15,4 Watt pro Port. Die Nachrüstung bestehender Applikationen bei denen der Bauraum im Schaltschrank erschöpft ist, ist ebenso möglich wie der Aufbau optimierter Neuinstallationen mit dem Fokus auf die Dezentralisierung der Komponenten.
SPECIFICATION
- General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
1,518 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (X-cod. + D-cod.) | 4+1 |
MTBF (SN 29500, Mio. h) |
tbd |
Frame Forwarding (Art.-No.) | xxxxx0 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding |
Ethernet Interfaces
- IEEE Standards:
802.3 10Base-T, 100Base-TX, 1000Base-T
Isolation:
2 kVDC X-codedD-coded PoE
1 kVDC X-codedhousing
Connection type:
RJ45
Port Count | Speed:
4 | 10/100 Mbit/s + 1 | 10/100/1000 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
Power supply / electronics
- Nominal voltage:(VDC)
Vin 24
Voltage range:(VDC)
16,8 - 30 (14,4 for 100 ms)
Connection type:
Vin M12 A-cod. (Pin1+|Pin2-) | M4 screw (FE)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Inrush current limiter:
No
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
PCB Conformal Coating:
Yes
Protection category:
III
Isolation:
2 kVDC Vinhousing | 1,5 kVDC Vin ↔ X-coded
0 kVDC Vin ↔ D-coded PoE
Power over Ethernet
- Type | Standard:
PSE | IEEE 802.3af/802.3at (Typ 1)
Mode:
A (Endspan); Pins V+ = 1,2 und V- = 3,6
Max. current per port (mA):
0,350
Max. power per port (W):
15.4
Max. total power budget PoE (W):
40
Galvanic isolation:
No
Switching live voltage path:
Yes
Isolation:
0 kVDC D-coded PoED-coded PoE
2,25 kVDC D-coded PoEhousing
Port count (X-cod. + D-cod.) | 4+1 |
Power consumption (W) Idle | full load (w/o PoE) Idle | full load (w PoE) |
1,5 | 2,9 41,5 | 43,0 |
Input current (A) Idle | full load (w/o PoE) Idle | full load (w PoE) |
0,06 | 0,12 1,73 | 1,80 |
Inrush current (A) | tbd |
Mechanical properties
- Housing material:
Nickel-plated aluminium, stainless steel
Mounting:
M6 hole for wall mounting, round head screw
IP Protection class (operation):
IP65/67
Port count (M12) | 4+1 |
Width (mm) | 65 |
Height (mm) | 135 |
Depth (mm) | 29,8 |
Weight (g) | 370 |
EMC and environmental specifications
- Operating temperature:
-40°C to 70°C
Storage temperature:
-40°C to 85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4
Mechanical stability:
DIN EN 61373
Fire protection:
DIN EN 45545
Approvals and certifications
- CE, DIN EN 50155, DIN EN 60950-1
Status and diagnostic indicators
- LED:
Power | Link/Activity pro Port | PoE pro Port
ORDERING INFORMATION
Available Modules | ||
Article | Art.-No. | Specification |
SPARK-XS41Q-31010 | 431410210 | 4+1,M12,PoE,24 V |
Kunden, die diesen Artikel gesehen haben, sahen auch