Advantech Conel BB SmartMotion ST352
TWIN CELLULAR MODULE ROUTER
- Two Independent cellular modules for advanced fail over feature
- Powerful CPU and enhanced memory to support high demand customer applications
- Load Balancing
- Extended operational temperature range from -40 °C to +75 °C
- 10-60 VDC operated with transient and reverse polarity voltage protection
- GPS and GLONASS support
- MicroSD card holder
- Low power consumption mode for solar and battery power applications
- Optional industrial grade WiFi
- PoE PD, PoE PSE, In/Out, USB Host
- Advanced security features
SmartMotion automatic wireless failover protects against loss of communications in wired or wireless networks by using dual LTE/4G cellular module technology that accommodates multiple cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s and download speeds of up to 100 Mbit/s meeting the high demand required for video transfer.
The SmartMotion is designed and tested to meet the requirements of industrial, mobile, security and other harsh environment application where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and advanced sleep mode feature to allow low power consumption for solar and battery power applications.
The SmartMotion places intelligence out at the network edge with an extremely powerful CPU and enhanced embedded memory capacity providing full support for LTE/4G (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartMotion from remote locations.
The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.
The flexible SmartMotion concept includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module).
The SmartMotion supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartWorx HUB, SmartCluster VPN Server and R-SeeNet.
HW SPECIFICATIONS
PORTS, LED, ANTENNAS | |
2× ETH ports | RJ45, 10/100 Mbps |
4× SIM | 2 Mini SIMs (2FF) (rear panel) |
LED Indicators | PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT |
5× ANT - ANT, DIV | SMA connectors |
1× Wi-Fi Antenna *Optional | R-SMA connector |
1× USB | USB Host connector 2.0 |
1× SD Card | 1× Micro SD Card slot (rear panel) |
RESET | RESET button (rear panel) |
POWER | |
Power Supply (sold separately) | 10 – 60 VDC (2–Way Molex connector) |
Power Consumption | Idle: 2.5 W Average: 4 W Peak: 11 W Sleep Mode: 10mW |
ENVIRONMENTAL | |
Temperature Range | Operating: -40 to +75 °C Storage: -40 to +85 °C |
Temperature Range LTE450 | Operating: -20 to +60 °C Storage: -40 to +85 °C |
Humidity | Operating: 0 to 95 % Storage (Non-condensing): 0 to 95 % |
Cold Start | -35 °C |
Operating Altitude | 2000 m / 70 kPa |
Ingress Protection Rating | IP30 |
MECHANICAL | |
Metal case with metal DIN rail | |
Enclosure Dimensions | 55x97x125 mm |
Weight Metal | 375 g |
GNSS SPECIFICATIONS | |
Antenna | 50 Ohms – active |
Protocols | NMEA 0183 v3.0 |
Frequency | 1575.42MHz |
Sensitivity | Tracking: -161dBm Acquisition (Assisted): -158dBm Acquisition (Standalone): -145dBm |
Acquisition time | Hot start: 1 s Warm start: 29 s Cold start: 32 s |
Accuracy | Horizontal: < 2m (50 %); < 5m (90 %) Altitude: < 4m (50 %); < 8m (90 %) Velocity: < 0.2mps |
WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES | |
Supported Wi-Fi band | 2.4 GHz, 5.4 GHz |
Encryption | None, WEP, TKIP, AES |
5 GHz supported channels | 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 |
2.4 GHz supported channels | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 |
Number of clients | 10 |
Authentication | Open, Shared, WPA–PSK, WPA2–PSK |
POE PARAMETERS | POE PD parameters for opposite PSE | P0E PSE |
Input voltage range | 42.5 – 57 V | 44 – 57 V, 65 W |
Power available | 25.50 W | 2x 25.50 W (ETH0, ETH1) |
Maximum current | 600 mA | |
Insul. Strength | 1.5 kV from the router | none |
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector. |
STANDARDS AND REGULATIONS
INDUSTRY CERTIFICATIONS & APPROVALS - ST352 | |
Telecom and emission for the 1st module | ETSI EN 301 511 V12.5.1, ETSI EN 300 440 V2.1.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.1, ETSI EN 301 908-13 V11.1.1 |
Telecom and emission for the 2nd module | ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1 |
EMC | ETSI EN 301 489-1 v1.9.2, ETSI EN 301 489-1 V2.1.1, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0, ETSI EN 301 489-17 V3.1.1 |
Safety | EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011, EN 62311:2008 |
E-Mark – EMC for devices in transportation | E-Mark homologation number: 10R – 04 8180 |
CELLULAR MODULE PARAMETERS - ST352 - both cellular modules 2× LTE | |
LTE parameters | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP rel. 8 standard Supported bandwidths: 5 MHz, 10 MHz, 20 MHz Supported frequencies: 800 / 900 / 1800 / 2100 / 2600 MHz |
HSPA+ parameters | Bit rate 42 Mbps (DL) / 5,76 Mbps (UL) 3GPP rel. 7 standard UE CAT. 1 to 6, 8, 10, 12, 14 3GPP data compression Supported frequencies: 900 / 1800 / 2100 MHz |
UMTS parameters | PS bit rate 384 kbps (DL) / 384 kbps (UL) CS bit rate 64 kbps (DL) / 64 kbps (UL) W-CDMA FDD standard Supported frequencies: 900 / 1800 / 2100 MHz |
GPRS/EDGE parameters | Bit rate 237 kbps (DL) / 59,2 kbps (UL) GPRS multislot class 10, CS 1 to 4 EDGE multislot class 12, CS 1 to 4, MCS 1 to 9 Supported frequencies: 900 / 1800 MHz Rated Output Power GSM/GPRS 1800 MHz: Class 1 Rated Output Power EDGE 900 / 1800 MHz: Class E2 |
GPRS/EDGE power classes | EGSM 900: Class 4 (33 dBm) GSM 1800: Class 1 (30 dBm) EDGE 900: Class E2 (27 dBm) EDGE 1800: Class E2 (26 dBm) |
Ordering Information
Available Modules - BB-ST352 | |
BB-ST35200020 | SmartMotion, EMEA, 2x ETH, Metal, No ACC |
BB-ST35200020-SWH | SmartMotion, EMEA, 2x ETH, Metal, No ACC |
BB-ST35200025 | SmartMotion, EMEA, 2x ETH, Metal, ACC Int. |
BB-ST35200025-SWH | SmartMotion, EMEA, 2x ETH, Metal |
BB-ST35208025-SWH | SmartMotion, EMEA, 2x ETH, PoE PSE, Metal, ACC Int. |
BB-ST35209025-SWH | SmartMotion, EMEA, 2x ETH, PoE PD, Metal, ACC Int. |
BB-ST35210020 | SmartMotion, EMEA, 2x ETH, WIFI, Metal, No ACC |
BB-ST35210025 | SmartMotion, EMEA, 2x ETH, WIFI, Metal, ACC Int. |
BB-ST35210025-SWH | SmartMotion, EMEA, 2x ETH, WIFI, Metal |
BB-ST35218025-SWH | SmartMotion, EMEA, 2x ETH, WIFI, PoE PSE, Metal |
BB-ST35219025-SWH | SmartMotion, EMEA, 2x ETH, WIFI, PoE PD, Metal |
Clients qui ont dájà consulté cet article ont également vu