Advantech BB-MDR-100 Series
96W Single Output Industrial DIN Rail Power Supply
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage / Over temperature
- ZCS/ZVS technology to reduce power dissipation
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- DC OK relay contact
- No load power consumption
Model serie MDR-100 is an industrial single-phase, low-profile, low cost power supply suitable for installations where space is at a premium - ideal for control panels and other industrial, control and automation applications. This switched-mode unit features a wide operating temperature range, finger-safe terminals and protection from short-circuit, overload and over-voltage. The power supply is adaptable to TS-35 / 7.5 or 15 DIN mount installation.
SPECIFICATIONS
MODEL | MDR-100-12 | MDR-100-24 | MDR-100-48 |
OUTPUT | |||
DC VOLTAGE | 12V | 24V | 48V |
RATED CURRENT | 7.5A | 4A | 2A |
CURRENT RANGE | 0 ~ 7.5A | 0 ~ 4A | 0 ~ 2A |
RATED POWER | 90W | 96W | 96W |
OUTPUT | 120mVp-p | 150mVp-p | 200mVp-p |
VOLTAGE ADJ. RANGE | 12 ~ 15V | 24 ~ 30V | 48 ~ 56V |
VOLTAGE TOLERANCE Note.3 | ± 1.0% | ± 1.0% | ± 1.0% |
LINE REGULATION | ± 1.0% | ± 1.0% | ± 1.0% |
LOAD REGULATION | ± 1.0% | ± 1.0% | ± 1.0% |
SETUP, RISE TIME Note.5 | 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load | ||
HOLD UP TIME (Typ.) | 50ms/230VAC 20ms/115VAC at full load | ||
INPUT | |||
VOLTAGE RANGE Note.6 | 85 ~ 264VAC 120 ~ 370VDC | ||
FREQUENCY RANGE | 47 ~ 63Hz | ||
POWER FACTOR (Typ.) | PF | ||
EFFICIENCY (Typ.) | 83% | 86% | 87% |
AC CURRENT (Typ.) | 1.3A/115VAC 0.8A/230VAC | ||
INRUSH CURRENT (Typ.) | COLD START 30A/115VAC 60A/230VAC | ||
LEAKAGE CURRENT (Typ.) | <1mA / 240VAC | ||
PROTECTION | |||
OVERLOAD | 105 ~ 150% rated output power | ||
Protection type :Constant current limiting, recovers automatically after fault condition is removed | |||
OVER VOLTAGE | 15.6 ~ 18V | 31.2 ~ 36V | 57.6 ~ 64.8V |
Protection type : Shut down o/p voltage, re-power on to recover | |||
OVER TEMPERATURE | Shut down o/p voltage, auto-recovery or re-power on to recover | ||
FUNCTION | |||
DC OK SIGNAL | Relay contact rating(max.): 30V/1A resistive | ||
ENVIRONMENT | |||
WORKING TEMP. | -10 ~ +60 °C (Refer to "Derating Curve") | ||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
STORAGE TEMP., HUMIDITY | -40 ~ +85 °C, 10 ~ 95% RH | ||
TEMP. COEFFICIENT | ± 0.03%/ °C °C (0 ~ 50) | ||
VIBRATION | Component : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ; Mounting : Compliance to IEC60068-2-6 | ||
SAFETY &EMC (Note 4) | |||
SAFETY STANDARDS | UL508, TUV EN60950-1 approved | ||
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH | ||
EMC EMISSION | Compliance to EN55011, EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3 | ||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | ||
OTHERS | |||
MTBF | 346K hrs min. MIL-HDBK-217F (25 °C ) | ||
DIMENSION | 55*90*100mm (W*H*D) | ||
PACKING | 0.42Kg; 30pcs/13.6Kg/0.82CUFT | ||
NOTE | |||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. Deating maybe needed under low input voltages, please check the derating curve for more detail. |
Ordering Information
Available Modules | |
BB-MDR-100-12 | 90W, 12VDC, 7.5A, AC-DC Single Output DIN Power Supply, Slim Plastic Case |
BB-MDR-100-24 | 96W, 24VDC, 4A, AC-DC Single Output DIN Power Supply, Slim Plastic Case |
BB-MDR-100-48 | 96W, 48VDC, 2A, AC-DC Single Output DIN Power Supply, Slim Plastic Case |
Clients qui ont dájà consulté cet article ont également vu