Advantech BB-ERT31x Series

The Spectre RT industrial router connects Ethernet equipment in tough environments where office-grade equipment cannot handle the job. With Ethernet, USB, I/O and auxiliary ports, it ss a flexible device with the built-in ability to handle multiple data communications protocols and to fit into virtually any network topology.

The Spectre RT supports creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software. A password- protected web interface allows users to configure and manage the Spectre RT from remote locations. The router can automatically upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network.

Users can insert Linux scripts and create up to four different configurations for the same router. Examples include binary input configurations. Users may switch from one configuration to another at any time.

SPECIFICATIONS

INTERFACES
Standard     Ethernet     USB     Binary I/O	10/100 Mb USB Type A Host 1 input/1 output
Port Options      Port 1      Port 2	Ethernet 10/100, RS-232, RS-422/485, Modbus, CNT (I/O) RS-232, RS-422/485, Modbus, CNT (I/O)
I/O CNT	4 Binary inputs, 1 Binary output (2 inputs maybe configured as counters) 2 Analog inputs, I Binary output
INTERNAL
	32b ARM microprocessor
	512 Mb DDR SDRAM
	128 Mb Flash
	1 Mb MRAM
POWER
Source	10 – 30 VDC
Consumption	Maximum 200 mA (12 VDC)
MECHANICAL
Dimensions	11.4 x 9.5 x 4.2 cm (4.49 x 3.74 x 1.65 in)
Enclosure	Metal
Weight	150 g
ENVIRONMENTAL
Operating Temperature	-40 to 75°C
Storage Temperature	-40 to 85°C
MEANTIME BEFORE FAILURE (MTBF)
MTBF	580576
MTBF Calc. Method	MIL 217F Parts Count Reliability Prediction
FEATURES
Networking	DHCP – automatic IP addressing in LAN network NAT – IP address and ports translation between inside/outside network Firewall filtering of addresses, ports, protocols VRRP – virtual backup router function DynDNS client – access to the router with a dynamic IP address VLAN 802.11Q: virtual LAN QoS: quality of service Dial-in – Communicate via CSD call NTP client, NTP Server: time synchronization PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN Tunneling	IPsec, OpenVPN, L2TP – secure encrypted tunnels GRE tunnel – simple tunnel without security measures
Configuration & Diagnostics	HTTP server – configuration via web server Telnet – configuration and access to the file system SNMP – router diagnostics, communication with I/O and M-BUS Remote router group configuration change, switching among configuration profiles SSH – encrypted configuration and access to the file system
Additional Functions	Linux based: program your own applications AT commands on RS232, Ethernet and I/O M-RAM memory inside – router statistic saved into memory
APPROVALS / CERTIFICATIONS
	CE, FCC, NEMA TS2 EN 301 511, v9.0.2 EN 301 908-1&2, v3.2.1 ETSI EN 301 489-1 V1.8.1 EN 60950-1:06 ed.2 + A11:09 + A1:10 IEC60068-2-27 - Shock, 50G peak, 11ms, 3 axes IEC60068-2-6 - Vibration, 10-500Hz, 4G, 3 axes

SPECIFICATIONS

Available Modules
BB-ERT310	Industrial Ethernet to Ethernet Router
ERT311	Industrial Ethernet to Ethernet Router, with 3 10/100 Ethernet Ports
ERT312	Industrial Ethernet to Ethernet Router, plus 1 RS-232 Port
ERT314	Industrial Ethernet to Ethernet Router, with RS-485 port

ACCESSORIES - sold separately

BB-C5UMB7FBG	- Category 5e cable, grey, 2.1 m (7 ft.)
BB-MDR-20-24	- Power supply, 24VDC, 1.0 A output power, DIN rail mount
BB-MDR-40-24	- Power supply, 24VDC, 1.7 A output power, DIN rail mount