Advantech BB-B-XC-ETH
Expansion board for v2 routers - 3x ETH port
- 2x ETHERNET 10/100
- Port 1 or Port 2
- Only for LR2F routers
- Provide 3x ETH Swich
The expansion port ETH is created as expansion port which enables to use of the next hardware interface of Advantech B+B SmartWorx routers and modems for next signal pro- cessing. This interface is physically connected on RJ45 connector of the device. The expan- sion port ETH is internally powered from the router. The ETH port is protected against bus overload.
Expansion port ETH can be fitted only into PORT1 position.
SPECIFICATIONS
Expansion port CNT | ||
Power supply | Internal | +3,3 V |
Environment | Operating temperature Storage temperature | -30 to +60◦C -30 to +85◦C |
Standards | Emission Immunity Safety | EN 55022/B ETS 300 342 EN 60950 |
Ethernet (IEEE 802.3) | Max. bit rate Max. total cable length (300Bd, 200nF/km) | 100 Mbps 100 m |
Order Information
Available Module | |
BB-B-XC-ETH | Expansion board for v2 routers - 3x ETH port (I/O) |
Kunden, die diesen Artikel gesehen haben, sahen auch