Advantech BB 100 Mbps Ethernet Media Converter
Product is End of Life : 2021-02-03
iMcV-LIM series
– with LFPT and Configuration Control
Les caractéristiques
Présentation
Plus d'information
Voir les produits similaires
Imprimer la fiche produit
Demander votre devis
Votre liste de demandes de devis
PDF
Les caractéristiques
Présentation
Plus d'information
PDF
- Available for multi-mode or single-mode fiber
- Double fiber capacity with single-strand fiber versions
- Monitor links and receive vital traffic and health information and notification should problems occur
- Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
- SNMP manageable
- Convert 100 Mbps copper to 100 Mbps fiber
- LFPT and Config Control
Satisfying today’s networking needs while preparing for tomorrow’s cabling requirements can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing network equipment. Replacing legacy equipment and wiring infrastructure is a costly choice. Managed media conversion allows implementation of new technologies on existing networks, while monitoring all connections, to keep networks running and up-to-date.
B+B SmartWorx offers a wide range of SNMP-managed Ethernet copper to fiber media converters, with a choice of fixed rate or rate conversion capabilities. The “iMcV-“ modules also include troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier. The 100 Mbps iMcV-Lim also features Link Fault Pass-Through. In addition, the modules provide Configuration Control.
All converters feature an RJ-45 copper port and a fiber port, with a choice of SC or ST connectors, and are hot-swappable.
SPECIFICATIONS
| TECHNICAL | |
| 100Base-TX twisted pair | |
| 100Base-FX or SX fiber | |
| AutoCross for MDI/MDIX | |
| Features LinkLoss, FiberAlert & Auto Negotiation | |
| Features Link Fault Pass-Through (LFPT) | |
| Supports Config Control | |
| Connectors: RJ-45 and ST, SC | |
| 50/125μm or 62.5/125μm multi-mode fiber | |
| 9/125μm single-mode fiber | |
| Install in any iMediaChassis or MediaChassis | |
| Free software support with iView2 Webserver | |
| Support half- and full-duplex operation | |
| Include diagnostic LEDs | |
| Include hot-swappable architecture | |
| MECHANICAL | |
| Dimensions | 10.74 x 2 x 7.05 cm ((4.19H x 0.78W x 2.75D in) |
| Shipping Weight | 0.11 kg (0.30 lbs) |
| ENVIRONMENTAL | |
| Operating Temperature | 0 to +50 °C (+32 to +122 °F) |
| Storage Temperature | -25 to +70 °C (-13 to +158 °F) |
| Operating Humidity | 5 to 95% (non-condensing), 0 to 10,000 ft. altitude |
| REGULATORY APPROVALS | |
| FCC Class B | |
| CE | |
| MEANTIME BEFORE FAILURE (MTBF) | |
| MTBF | 4.5 million hours |
ORDERING INFORMATION
| MODEL NUMBER | FIBER | FIBER PORTS | RANGE | ETHERNET PORTS | ETHERNET CONNECTOR |
| iMcV-LIM TX/FX and TX/SX | |||||
| BB-850-15611 | SX-MM850-ST | 1 | 2 km | 1 | RJ45 |
| BB-850-15612 | SX-MM850-SC | 1 | 2 km | 1 | RJ45 |
| BB-850-15613 | FX-MM1300-ST | 1 | 5 km | 1 | RJ45 |
| BB-850-15614 | FX-MM1300-SC | 1 | 5 km | 1 | RJ45 |
| BB-850-15618 | FX-SM1310/PLUS-SC | 1 | 40 km | 1 | RJ45 |
| BB-850-15620 | FX-SM1310/LONG-SC | 1 | 80 km | 1 | RJ45 |
| SINGLE STRAND FIBER * | |||||
| BB-850-15633 | SSFX-SM1310-SC | 1 | 20 km | 1 | RJ45 |
| BB-850-15634 | SSFX-SM1550-SC | 1 | 20 km | 1 | RJ45 |
| BB-850-15635 | SSFX-SM1310/PLUS-SC | 1 | 40 km | 1 | RJ45 |
| BB-850-15636 | SSFX-SM1550/PLUS-SC | 1 | 40 km | 1 | RJ45 |
* These products have single-strand fiber technology. Deploy in pairs or connect another compatible B+B SmartWorx LLC single-strand fiber product.
Clients qui ont dájà consulté cet article ont également vu