Advantech BB-9POP4

The 9POP4 isolates and protects RS-232 equipment from lightning surges, accidental high voltage shorts, and ground loops. RS-232 data signals TD, RD, RTS, and CTS are supported at up to 230.4 kbps. Isolation circuits are 2.5 kV rated and protects valuable equipment while maintaining maximum uptime.

Each side of the isolator receives power from a single 12 VDC power supply to maintain the isolation. This powering configuration allows the device to be used in a system with only one power supply, regardless of the power provided by the RS-232 ports.

The isolator uses DB9 male and DB9 female connectors. The female connector is wired as a DCE and should be connected to a DTE port. The male connector is a DTE and should be connected to a DCE port. If you are connecting a DTE to a DTE or a DCE to a DCE, you will need a null modem adapter.

Power supplies recommended and available from Advantech B+B SmartWorx have been tested and certified. Using any other power supply may bypass or degrade the isolation barrier

SPECIFICATIONS

SERIAL TECHNOLOGY


RS-232
TD, RD, RTS, CTS, GND

Data Rate
230.4 kbps

Isolation
2.5 kV

ESD
15 kV Air Discharge, 8 kV Contact

Connectors
DB9 female (DCE)
DB9 male (DTE)



POWER


Source
External required

Power Connector
2.5 mm jack

Input Voltage
12 VDC

Power Consumption
731 mW



MECHANICAL


Dimensions
10.4 x 4.3 x 2.0 cm (4.1 x 1.7 x 0.86 in)

Enclosure
IP30, plastic

Weight
54.4 g (0.12 lbs)

MTBF
262084 hours

MTBF Calc. Method
MIL 217F Parts Count Reliability



ENVIRONMENTAL


Operating Temperature
0 to 70 °C

Storage Temperature
-40 to 85 °C

Operating Humidity
0 to 95% Non-condensing



APPROVALS / CERTIFICATIONS


Directives
2014/30/EC - Electromagnetic Compatibility Directive
2011/65/EU - Reduction of Hazardous Substances Directive

Standards
EN 55032 (Class B) - Electromagnetic Compatibility of Multimedia Equipment - emission requirements
EN 55024 - IT Equipment - Immunity characteristics - Limits and methods of measurements
EN 61000-6-1 - Generic immunity standard for residential, commercial and light-industrial environments
EN 61000-4-2 - ESD Immunity
EN 61000-4-3 - Radiated Immunity
EN 61000-4-4 - EFT/Burst Immunity
EN 61000-4-6 - RF Conducted Immunity

ORDERING INFORMATION

MODEL NUMBER	DESCRIPTION
BB-9POP4	RS-232 4-Channel Optical Isolator

ACCESSORIES

MODEL NUMBER	DESCRIPTION
BB-SMI6-12-V-P230-C1	- Power Supply, 12 VDC 6 Watt, 2.5MM Plug, International AC Input, International AC Blades