Advantech BB-702M12-W
IP67 1-P(10/100TX,M12D)WIRELESRADIO,3 MIMO,BLKHDMT
- One 10/100BaseTX RJ-45 port
- Three antennas for 3x3 MIMO operations
- Four user-defi nable LEDs for display of signal quality
- Radio enable, link/activity, and power LEDs
- Station roaming
- 802.3af PoE-powered device
- Extended environmental specifi cations
- Auto sensing 10/100BaseTX, duplex, and MDIX
- Rugged DIN-rail enclosure
- Redundant power inputs (20-49 VDC)
- Web browser management
The N-TRON ® 702M12-W Industrial Wireless Radio offers outstanding performance and ease of use. It is ideally suited for connecting wireless devices to a wired network or for connecting two wired networks in an IP67 environment, where it is not possible, impractical, or too expensive to install cable.
Applications
In industrial environments, the installation of fi ber or Cat5e cable and associated power cables is diffi cult or cost prohibitive. There are also applications which require communication with mobile devices such as laptop computers, forklifts, cockpits or control centers on mobile equipment such as cranes, and other devices which are impossible to connect with copper or fi ber cable. The N-TRON 702M12-W provides a wireless connection that can be quickly and easily deployed. With it's wide operating temperature range and 1 million hours MTBF, the 702M12-W offers the industrial ruggedness that customers have come to expect of N-TRON products. The IP67 sealed enclosure insures that outdoor, wash down, and the most dusty environments will present no problems to the 702M12-W. Three antennas enable the use of Multiple-In, Multiple-Out (MIMO) technology for increased throughput. Power over Ethernet (PoE) technology allows the 702M12-W to receive power through the Cat5e cable from a PoE sourcing device, such as the N-TRON 105TX-POE Switch. This eliminates the need for power cables or power supplies for the 702M12-W. Using wireless and PoE technology makes temporary deployment of network nodes much easier because only one Cat5e cable is required.
Applications
In industrial environments, the installation of fi ber or Cat5e cable and associated power cables is diffi cult or cost prohibitive. There are also applications which require communication with mobile devices such as laptop computers, forklifts, cockpits or control centers on mobile equipment such as cranes, and other devices which are impossible to connect with copper or fi ber cable. The N-TRON 702M12-W provides a wireless connection that can be quickly and easily deployed. With it's wide operating temperature range and 1 million hours MTBF, the 702M12-W offers the industrial ruggedness that customers have come to expect of N-TRON products. The IP67 sealed enclosure insures that outdoor, wash down, and the most dusty environments will present no problems to the 702M12-W. Three antennas enable the use of Multiple-In, Multiple-Out (MIMO) technology for increased throughput. Power over Ethernet (PoE) technology allows the 702M12-W to receive power through the Cat5e cable from a PoE sourcing device, such as the N-TRON 105TX-POE Switch. This eliminates the need for power cables or power supplies for the 702M12-W. Using wireless and PoE technology makes temporary deployment of network nodes much easier because only one Cat5e cable is required.
SPECIFICATIONS
Case Dimensions | |
Height: (w/o antennas) | 6.7" (17.2 cm) |
Width: | 6.7" (17.2 cm) |
Depth: | 1.8" (4.6 cm) |
Weight (max): | 3.5 lbs (1.6 kg) |
Environmental | |
Operating Temperature: | -40oC to 70oC |
Storage Temperature: | -40oC to 85oC |
Operating Humidity: | 5% to 100% (Non Condensing) |
Operating Altitude: | 0 to 10,000 ft. |
N-TRON Power Supply: | NTPS-24-1.3 |
Electrical | |
Redundant Input Voltage: | 20-49 VDC (Regulated) |
Input Current (max): | 200mA max @24 VDC |
702M12-W Max Power: | 4.8Watts max |
Input Ripple: | Less than 100mV |
Reliability | |
MTBF: | >1 Million Hours |
Network Media | |
10BaseT: | >Cat3 Cable |
100BaseTX: | >Cat5 Cable |
802.11abgn: | Air |
Connectors | |
10/100BaseTX: | One (1) M12 Copper Port PoE Powered device support |
802.11abgn | (3) RP-TNC connectors |
Recommended Wiring Clearance (Antenna Dependent) | |
Front: | 4" (10.16cm) |
Side: | 4" (10.16cm) |
Top: | 6" (15.24cm) |
Clients qui ont dájà consulté cet article ont également vu