Advantech BB-485SD9RJ
Port Powered RS-232/485 Converter – DB9F-RJ11
- Extend RS-232 data signals up to 1.2 km (4,000 ft.)
- Change RS-232 TD and RD to RS-485 signals
- Automatic Send Data Control - no software drivers necessary
- Baud rates up to 115.2 kbps
- Powered from RS-232 handshake lines - no power supply required
This port-powered, two channel converter allows your computer to communicate longer distances by converting TD and RD RS-232 lines to RS-485 signals. RS-485 also provides multi-drop capability.
Model 485SD9RJ features Automatic Send Data Control which enables the driver when data is present on the RS-232 side. Control of the driver is automatic at speeds up to 115.2 kbps.
The converter is powered from the RS-232 data and handshake lines whether the lines are high or low. No handshake line change is necessary to control the data lines. The RS-485 driver is enabled with each bit of data. The RS-485 receiver is disabled when the driver is enabled and is enabled when the driver is disabled.
This converter is suitable for field service, where a power supply would add clutter, or anywhere you need compact, easy-to-use, economically priced serial conversion.
Model 485SD9RJ features Automatic Send Data Control which enables the driver when data is present on the RS-232 side. Control of the driver is automatic at speeds up to 115.2 kbps.
The converter is powered from the RS-232 data and handshake lines whether the lines are high or low. No handshake line change is necessary to control the data lines. The RS-485 driver is enabled with each bit of data. The RS-485 receiver is disabled when the driver is enabled and is enabled when the driver is disabled.
This converter is suitable for field service, where a power supply would add clutter, or anywhere you need compact, easy-to-use, economically priced serial conversion.
SPECIFICATIONS
SERIAL TECHNOLOGY | |
Data Rate | 115.2 kbps maximum |
RS-232 | |
Connector | 485SD9R: DB9 female 485SD9RJ: DB9 female 485SD9TB: DB9 female |
RS-485 | |
Connector | 485SD9R: DB9 female 485SD9RJ: RJ11 485SD9TB: Terminal board |
Biasing Resistors | 4.7k Ohms |
POWER | |
Source | Port-powering: from RS-232 handshake lines. External power option, 12-16 VDC (485SD9TB only) |
Power Connector | Terminal block (485SD9TB only) |
Input Voltage | 12 VDC (485SD9TB only) |
Power Consumption | 40mA maximum |
MECHANICAL | |
Dimensions | 485SD9R: 6.0 x 3.2 x 1.6 cm (2.4 x 1.3 x 0.6 in) 485SD9RJ: 7.3 x 3.2 x 1.6 cm (2.9 x 1.3 x 0.6 in) 485SD9TB: 8.7 x 3.2 x 1.6 cm (3.4 x 1.3 x 0.6 in) |
Enclosure | Plastic |
Weight | 81.6 g (0.18 lb) |
MTBF | 485SD9R: 986473 hours 485SD9RJ: 897656 hours 485SD9TB: 968410 hours |
MTBF Calc. Method | MIL 217F Parts Count Reliability Prediction |
WIRING INFORMATION | |
Refer to Quick Start Guide for wiring information, including terminal and pin identification. Available on website. | |
ENVIRONMENTAL | |
Operating Temperature | 0 to +70 °C (+32 to +158 °F) |
Storage Temperature | -40 to +85 °C (-40 to +185 °F) |
Operating Humidity | 0 to 95% non-condensing |
APPROVALS, DIRECTIVES, STANDARDS | |
APPROVALS | FCC Part 15, CISPR, CE |
Directives | 2014/30/EU - Electromagnetic Compatibility Directive 2011/65/EU - Reduction of Hazardous Substances Directive (RoHS) 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE) |
Standards | EN 55032 Class A - Electromagnetic Compatibility of Multimedia Equipment - Emission Requirements EN 55024 - Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement EN 61000-6-4 + A1 - Generic Emission Standard for Industrial Environments (Class A) EN 61000-6-2 - Ceneric Immunity Standard for Industrial Environments |
ORDERING INFORMATION
MODEL NUMBER | RS-232 CONNECTOR | RS-485 CONNECTOR | OUTPUT | OPTIONAL POWER SUPPLY |
485SD9R | DB9 Female | DB9 Female | RS-485 2-wire | - |
485SD9RJ | DB9 Female | RJ11 | RS-485 2-wire | - |
485SD9TB | DB9 Female | Terminal Block | RS-485 2-wire | X |
Kunden, die diesen Artikel gesehen haben, sahen auch