MOXA TAP-213
Railway onboard 802.11n IP68 wireless AP/client
- IEEE 802.11a/b/g/n compliant
- Can be powered by redundant dual DC power inputs or PoE
- QoS (WMM) and VLAN for efficient network traffic
- Controller-based Turbo Roaming
- Complies with all EN 50155 mandatory test items
- Rugged IP68-rated housing and -40 to 75°C operating temperature
- Wireless network redundancy with AeroLink protection
The TAP-213 outdoor wireless AP/client is the ideal ruggedized wireless solution for railway onboard train-to-ground applications such as CCTV and CBTC communications. The TAP-213’s dust-tight, weatherproof design is IP68-rated, allowing you to extend wireless networks to outdoor locations and critical environments. The two redundant DC power inputs increase the reliability of the power supply and the device can also be powered via PoE for easier deployment. The TAP-213 is compliant with industrial standards and railway approvals covering operating temperature, power input voltage, surge, ESD, and vibration. With many hardened industrial-grade features, the TAP-213 will provide stable and reliable wireless connectivity, especially for railway onboard environments.
Features for Critical Environments
- IP68-rated metal housing and -40 to 75°C wide operating temperature
- Anti-vibration M12 design and waterproof/dust-tight connectors
- PoE and dual DC power inputs
Specifications for Railway Applications
- High power 400 mW (max.) radio
- Wide range power input from 24 to 110 VDC
- Client-based Turbo Roaming handover time less than 150 ms with 1 channel and WPA2, and less than 350 ms with 3 channels and WPA2
- Controller-based Turbo Roaming handover time (available only when used with the WAC-1001 or WAC-2004) less than 50 ms with 3 channels and WPA2
- Multiple roaming parameters for different installation structures and antenna types
WLAN Interface
- Standards
- DSSS with DBPSK, DQPSK, CCK
- OFDM with BPSK, QPSK, 16QAM, 64QAM
- 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps
- 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
- 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
- SSID broadcast enable/disable
- Firewall for MAC/IP/Protocol/Port-based filtering
- 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: 6.5 to 300 Mbps (multiple rates supported)
- Typ. 26±1.5 dBm @ 1 Mbps
- Typ. 26±1.5 dBm @ 2 Mbps
- Typ. 26±1.5 dBm @ 5.5 Mbps
- Typ. 25±1.5 dBm @ 11 Mbps
- Typ. 23±1.5 dBm @ 6 to 24 Mbps
- Typ. 21±1.5 dBm @ 36 Mbps
- Typ. 19±1.5 dBm @ 48 Mbps
- Typ. 18±1.5 dBm @ 54 Mbps
- Typ. 23±1.5 dBm @ MCS0/8 20 MHz
- Typ. 18±1.5 dBm @ MCS7/15 20 MHz
- Typ. 23±1.5 dBm @ MCS0/8 40 MHz
- Typ. 17±1.5 dBm @ MCS7/15 40 MHz
- Typ. 23±1.5 dBm @ 6 to 24 Mbps
- Typ. 21±1.5 dBm @ 36 Mbps
- Typ. 20±1.5 dBm @ 48 Mbps
- Typ. 18±1.5 dBm @ 54 Mbps
- Typ. 23±1.5 dBm @ MCS0/8 20 MHz
- Typ. 18±1.5 dBm @ MCS7/15 20 MHz
- Typ. 23±1.5 dBm @ MCS0/8 40 MHz
- Typ. 18±1.5 dBm @ MCS7/15 40 MHz
- -93 dBm @ 1 Mbps
- -93 dBm @ 2 Mbps
- -93 dBm @ 5.5 Mbps
- -88 dBm @ 11 Mbps
- -88 dBm @ 6 Mbps
- -86 dBm @ 9 Mbps
- -85 dBm @ 12 Mbps
- -85 dBm @ 18 Mbps
- -85 dBm @ 24 Mbps
- -82 dBm @ 36 Mbps
- -78 dBm @ 48 Mbps
- -74 dBm @ 54 Mbps
- -70 dBm @ MCS7 20 MHz
- -69 dBm @ MCS15 20 MHz
- -67 dBm @ MCS7 40 MHz
- -67 dBm @ MCS15 40 MHz
- -90 dBm @ 6 Mbps
- -88 dBm @ 9 Mbps
- -88 dBm @ 12 Mbps
- -85 dBm @ 18 Mbps
- -81 dBm @ 24 Mbps
- -78 dBm @ 36 Mbps
- -74 dBm @ 48 Mbps
- -74 dBm @ 54 Mbps
- -69 dBm @ MCS7 20 MHz
- -71 dBm @ MCS15 20 MHz
- -63 dBm @ MCS7 40 MHz
- -68 dBm @ MCS15 40 MHz
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical)
Operating Channels (central frequency)
EU:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
*Special frequency bands (up to 6.0 GHz) are available for customization.
Security
Transmission Rates
Transmitter Power
802.11b:
802.11g:
802.11n (2.4 GHz):
802.11a:
802.11n (5 GHz):
Receiver Sensitivity
802.11b:
802.11g:
802.11n (2.4 GHz):
802.11a:
802.11n (5 GHz):
Protocol Support
- General Protocols
Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols
ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Interface
- LAN Ports
1, M12 X-coded 8-pin female connector, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port
M12 B-coded 5-pin female connector for the USB console
USB Port
M12 A-coded 5-pin female connector for ABC-02 USB storage
Reset
Present
LED Indicators
PWR, FAULT, STATE, WLAN, LAN 1, LAN 2
Fiber Port
100/1000Base SFP slot
Connector for External Antennas
N-type (female)
Physical Characteristics
- Housing
Metal, IP68 protection
Weight
1500 g (3.31 lb)
Dimensions
220 x 150 x 50.5 mm (8.66 x 5.90 x 1.99 in)
Installation
Wall mounting (standard), DIN-rail mounting (optional), pole mounting (optional)
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Power Requirements
- Input Voltage
24 to 110 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Input Current
0.65 A @ 24 VDC, 0.16 A @ 110 VDC
Connector
M12 A-coded 4-pin male connector
Power Consumption
17.6 W (max.)
Reverse Polarity Protection
Present
Standards and Certifications
- Safety
UL 60950-1, IEC 60950-1(CB), LVD EN 60950-1
EMC
EN 61000-6-2/6-4
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Radio
EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, DFS, FCC ID SLE-WAPN008
Rail Traffic
EN 50155*, EN 50121-4
Fire and Smoke
EN 45545-2
*This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard.
MTBF (mean time between failures)
- Time
758,369 hrs
Standard
Telcordia SR332
ORDERING INFORMATION | |
Available Models | |
TAP-213-EU-CT-T | Railway onboard 802.11n IP68 wireless AP/client, EU band, -40 to 75°C operating temperature, conformal coating |
Compatible Modules
| |
SFP-1GLHXLC-T | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature |
SFP-1GLSXLC-T | SFP module with 1 1000BaseLSX port with LC connector for 2 km transmission, -40 to 85°C operating temperature |
SFP-1GLXLC-T | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature |
SFP-1GSXLC-T | SFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C operating temperature |
I clienti che hanno visto questo prodotto hanno anche consultato