AKCP Power Monitoring Sensor (PMS)
The Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems
The AKCess Pro Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems. The AKCess Pro Power Monitor Sensor is specifically designed to be used with AKCess Pro´s securityProbe base units.
It has been integrated into the securityProbe´s web interface with its own ¡°Power Management¡± menu, allowing up to six three phase and fourteen single phase Power Monitor Sensors to be set up on a single securityProbe. More PMS can be connected to a single base unit depending on what readings are required.
Data collected voer time using the Power Monitor sensor can also be viewed using the built in graphing tool.
Combining this durable Power Monitor Sensor with the securityProbe creates an IP-enabled power monitoring capable of monitoring / measuring :
- Phase Line Voltages
- Current
- Power Factor
- Active Energy
- Active Power
Create alert notifications using the Rich Notification Suite and choose any combination of these alert options:
- SMS
- MMS
- Telephone call
- Fax
- SNMP
- Relay switch automates corrective action.
This four-wire sensor is encased in sturdy white plastic and mounts on a 35mm DIN rail. Order it for 110 or 220 power supplies. It functions with single- or three-phase circuits, and meets international standards for active and reactive energy - IEC 62053-21 and IEC 62053-23, respectively.
The change from our previous type PMS to this type of Power Monitor Sensors provides improvements to the hardware design and quality. Providing a much more stable product with enhanced performance.
Note: Installation should be performed by licensed electricians familiar with applicable codes and regulations.
Specifications
Single Phase Meter | Three Phase Meter | Three Phase Meter - CT Type | |
Voltage(V) | |||
Rated Voltage (Un) | 230 VAC | 230/400V AC (3~) | 230/400V AC (3~) |
Voltage range | 0.7~1.3Un | 161/279 - 300/520V AC (3~) | 161/279 - 300/520V AC (3~) |
Current(A) | |||
Basic current (lb) | 10A | 10A | 1.5A |
Maximum current | 100A | 100A | 6A |
Operational Current Range | 0.4% Ib- lmax | 0.4% Ib- lmax | 0.4% Ib- lmax |
Over Current Withstand | 30Imax for 0.01s | 30Imax for 0.01s | 30Imax for 0.01s |
Internal Power Consumption | ?2W / 10VA | ?2W / 10VA per phase | ?2W / 10VA per phase |
Frequency(Hz) | 50?60Hz ±10% | 50Hz ±10% | 50Hz ±10% |
Standards | IEC 62053-21 | IEC 62053-21 | IEC 62053-21 |
Temperature range(¡ãC) | |||
Operating Temperature | -10°C ? +50°C | -10°C ? +50°C | -10°C ? +50°C |
Operating Humidity | ? 75% | ? 75% | ? 75% |
Accuracy Class | |||
Voltage | ±0.5% | ±0.5% | ±0.5% |
Amps | ±0.5% | ±0.5% | ±0.5% |
Frequency (Hz) | ±0.2% | ±0.2% | ±0.2% | Communication |
Type | RS485 | RS485 | RS485 |
Standard | Modbus | Modbus | Modbus | Dimensions(L*W*H) (cm) |
Height | 100 mm | 130 mm | 130 mm |
Width | 76 mm | 126 mm | 126 mm |
Depth | 65.5 mm | 65 mm | 65 mm |
Max Diameter Cable | 11.5 mm | ||
Weight | 0.35 Kg | 0.7 Kg (net) | 0.7 Kg (net) |
Product Codes :
PMS220HC3P | (230/400V 50Hz 3ph) |
PMS230HCS | (230V 50hz 1ph) |
PMS110HCS | (100V 60Hz 1ph) |
PMS230-CT50 | (230/400V 50Hz CT meter) |
PMS120-CT50 | (120/208V 60Hz CT meter) |
PMS277-CT60 | (277/480V 60Hz CT meter) |
Ordering Information
Product Model | Order Number | Description |
---|---|---|
Power Monitoring Sensor (securityProbe and sensorProbe+ only) | ||
PMS220HC3P | 940102 | 100A 230/400V 50Hz 3ph meter (four wire) |
PMS230HCS | 940063 | 100A 230V 50Hz 1ph meter (four wire) |
PMS110HCS | 100A 100V 60Hz 1ph meter (four wire) | |
Current Transformer Meters | ||
PMS230-CT50 | 230/400V 50Hz | |
PMS120-CT60 | 120/208V 60Hz | |
PMS277-CT60 | 277/480V 60Hz |
I clienti che hanno visto questo prodotto hanno anche consultato