AKCP sensorProbeX+ (SPX+)
environmental monitoring solution
- Every sensorProbeX+ is equipped with Ethernet, Modbus RS485, EXP and BEB communications
- Compatible with sensorProbeX+ EXP and BEB units, expand the capabilities of your device.
- 1U rackmount brackets, Tool-less 0U mounting or DIN rail mounting options.
- Notification by SNMP, Email, SMS (requires optional cellular modem), built in buzzer.
- Compatible with wide range of AKCP Intelligent sensors.
- Start with base configuration and build up your device with modules you need.
- Up to 80 virtual sensors.
The latest generation of sensorProbe devices, in a form factor that allows for 1U, 0U and DIN rail mounting. A low profile design that is economical on cabinet space. sensorProbeX+ comes in several standard configurations, or can be customized by choosing from a variety of modules such as dry contact inputs, IO?s, internal modem, analog to digital convertors, internal UPS and additional sensor ports
Intelligent Sensors
sensorProbeX+ is compatible with all AKCP Intelligent sensors, making it an extremely versatile and cost effective monitoring solution. From the data center, to remote sites, industrial controls it has you covered.
Environmental Monitoring Sensors
Wherever monitoring of environmental conditions is important to your daily operations and health of equipment, deploy sensors to monitor temperature, humidity, airflow and water leaks.
Security Sensors
RFID Access control swing handle cabinet locks, door contacts and motion detectors will keep you in tune with the security situation at your sites down to cabinet level. Control who can access and when with RFID access control, centrally managed and monitored through AKCPro Server.
Power Sensors
AC Voltage detection, DC volt meters, sensor controlled relays and power metering can all be done on the SPX+
Specialized Sensors
Tank depth pressure sensors can monitor for liquid levels in fuel tanks, oil storage, chemical tanks and so on. Any tank up to 2 meters in depth can be monitored. Alarms generated when levels drop to critical levels, making sure you can re-fill with sufficient notice. Other specialized sensors include the keyswitch override, to disable notifications while maintenance work is being performed, and a programmable LCD display.
SPX+ Standard Configurations
- AKCP SPX4
- 4x intelligent sensor ports.
- 1x EXP / Modbus / RS485 port.
- 1x BEB port.
- 1U rack mounting, brackets included.
- Short DIN rail mounted version available. (SPX4-D)
- Basic configuration, build your customized device with additional modules.
- 8x intelligent sensor ports.
- 1x EXP / Modbus / RS485 port.
- 1x BEB port.
- 1U rack mounting brackets included.
- Short DIN rail mounted version available. (SPX8-D)
- 4x intelligent sensor ports.
- 10x I/O Dry contacts. (Isolated dry contact options also available, please see list of optional modules)
- 1x EXP / Modbus / RS485 port.
- 1x BEB port.
- 1U rack mounting, brackets included.
- Short DIN rail mounted version available. (SPX4-X10-D)
- 8x intelligent sensor ports.
- 20x I/O Dry contacts. (Isolated dry contact options also available, please see list of optional modules)
- 1x EXP / Modbus / RS485 port.
- 1x BEB port.
- 1U rack mounting, brackets included.
- Additional modules will exceed 1U length and require 0U mounting, or additional 1U BEB unit.
- 8x intelligent sensor ports.
- 60x I/O Dry contacts. (Isolated dry contact options also available, please see list of optional modules)
- 1x EXP / Modbus / RS485 port.
- 1x BEB port.
- 2U rack mounting, brackets included. (Optional mounting ?back to back? in 1U)
- Configuration consists of master SPX+ and additional BEB unit.
AKCP SPX8
AKCP SPX4-X10
AKCP SPX8-X20
AKCP SPX8-X60
Dimension :
44 (W) x 46 (H) low profile design
Supports connection of:
Modbus RTU, E-Sensor8, E-Opto16 and CCU Expansion modules through optional EXP port
Mounting
0U Toolless rack mount, optional wall mount brackets, horizontal 1U mounting or DIN rail brackets
Power :
External 5V 2A Power Adapter
Input Voltage and Current ratings : 100V~240V - 0.22A
Optional internal power supply
Status Indication :
LED indication for power, network connectivity
sensor online and threshold
Components :
Manufactured using highly integrated, low power surface
mount technology. All units undergo a minimum 48 hour
burn in cycle to detect infact mortality
Operating Environment :
Temperature : Min. -35° C ? Max.70° C
Humidity:
Min. 20% ? Max. 80% (Non-Condensing)
MTBF :
1,400,000 Hours based on field experience with sensorProbe units.
Base Unit :
4x Sensor Ports for connecting AKCP sensors or swing handle cabinet locks
1x Expansion Out Port (Optionally used for Modbus)
1x 10/100 Ethernet Port
Max Sensors :
Maximum of 150 onlined sensors, including Expansion Units and virtual sensors.
Reduced to 50 if VPN is enabled
SPX+ Modules :
GSM or CDMA 3G cellular data modem with external antenna
4x Sensor Ports module for connecting AKCP sensors or swing handle cabinet locks
10x or 20x Dry Contacts module, available in 3 configurations :
- Configurable I/O dry Contact (0VDC/5VDC)
- Input only 5V Dry Contact, opto-coupled input
- Isolated input Dry Contact, from 5V to 20V voltage input signa
Ordering Information
Product Model | Order Number | Description |
---|---|---|
sensorProbeX+ Standard Configurations | ||
SPX4 | 940117 | 1U sensorProbeX+ with 4 sensor ports |
SPX8 | 944143 | 1U sensorProbeX+ with 8 sensor ports |
SPX4-X10 | 944144 | 1U sensorProbeX+ with 4 sensor ports and 10 I/O dry contacts |
SPX8-X20 | 944145 | 1U sensorProbeX+ with 8 sensor ports and 20 I/O dry contacts |
SPX8-X60 | 944146 | 2U sensorProbeX+ with 8 sensor ports and 60 I/O dry contacts |
sensorProbeX+ BEB units | ||
SPX-BE-U-S | 944148 | SPX+ BEB with 4x sensor ports |
SPX-BE-U-D2 | 944149 | SPX+ BEB with 20 I/O dry contacts |
SPX-BE-U-2S-D2 | 940195 | SPX+ BEB with 8 sensor ports and 20 I/O dry contacts |
SPX-BE-U-2D2 | 940175 | SPX+ BEB with 40 I/O dry contacts |
SPX-BE-U-4S | 944150 | SPX+ BEB with 16 sensor ports |
sensorProbeXN+ | ||
SPXN+ (copletely locked) | 944135 | "1U sensorProbeXN+ with PoE and 4 sensor ports (completely locked) The SPXN+ is a fully featured SPX+ in a standard configuration that includes 8 sensor ports, 10x floating I/O, 2x 4-20mAmp A2D inputs and 2x mini relay inputs." |
SPXN+ | 944136 | "1U sensorProbeXN+ with PoE and 4 sensor ports The SPXN+ is a fully featured SPX+ in a standard configuration that includes 8 sensor ports, 10x floating I/O, 2x 4-20mAmp A2D inputs and 2x mini relay inputs." |
sensorProbeXN+ Optional Modules | ||
S4 | 944137 | Unlock 4 sensor ports |
S8 | 944138x | Unlock all 8 sensor ports |
D1N | 944139 | Unlock 10x dry contact I/O |
A2D | 944140 | Unlock 2x A2D Inputs |
2MR | 944141 | Unlock 2x Mini Relays |
sensorProbeX+ Optional Modules | ||
S | 940119 | Sensor 4 module |
D1 | 940122 | 10x I/O dry contacts |
D1i | 940124 | 10x 5VDC isolated dry contacts |
D1iV | 940125 | 10x 20VDC isolated dry contacts |
D1ACV | 944151 | 10x 5-20VAC isolated dry contacts |
D2 | 940118 | 20x I/O dry contacts |
D2i | 940127 | 20x 5VDC isolated dry contacts |
D2iV | 940128 | 20x 20VDC isolated dry contacts |
D2ACV | 944152 | 20x 5-20VAC isolated dry contacts |
A2D4 | 944153 | 4x 0-5 VDC inputs |
A2D4 (4-20) | 940199 | 4x 4-20mAmp inputs |
A2DMR | 944154 | 2x 0-5 VDC inputs with 2x Mini Relays |
A2DMR (4-20) | 944155 | 2x 4-20mAmp inputs with 2x Mini Relays |
4MR | 940213 | 4x Mini Relays |
UPS | 940183 | "Internal mini UPS 4x AA batteries (Batteries are not included)" |
Accessories for SPX+ | ||
5AVAC3 | 940197 | 5V 3A Power supply with IEC connector for SP2+, SPX+, SEC+ and SP2/SP4/SP8 5V version |
POE-DC48 | 944080 | "Add PoE and DC48-60 input option for any of the above (If an SPx+ is ordered as a POE variant, no power supply is included.)" |
DC24 | 944147 | Add DC 12-24 input for any of the above |
optional Accessories for SPX+ / SPXN+ | ||
E-M4G | 944122 | "External UART Modem 4G external Modem (Global band) includes : 3m External Antenna Compatible with SMS Notifications and data (with voice call support) (only for SP1+P, SP2+P, SPX+)" |
D | 944156 | DIN rail mounting option |
VC | 944157 | Ball Valve Controller |
"When adding modules, check if the additional modules exceed 1U length. Modem modules can only be added to SPX+, not SPX-BEB units. Batteries not included." | ||
sensorProbe+ Software Licenses ( SPXN+, SPX+) | ||
VP | 940184 | VPN - Connect base unit to AKCPro Server only |
VS | 940172 | "Virtual sensors (pack of 5 sensors). Max of 80 virtual sensors. (only for SP1+P, SP2+P, SPX+, 5 virtual sensors are included with delivery SP1+ and SP2+, 10 virtual sensors are included with delivery SPX+)" |
PM | 940173 | 3rd Party Modbus / PMS (per device). Up to 4 devices with 15 sensors |
UA | 944158 | 500 Users for access control (instead of 100) |
SP-IPV6 | 940185 | IPV6 |
RAD | 940186 | Radius |
SP+UN | 944159 | "Gateway License (12 months) unlocks :- Cloud access Virtual Sensors VPN IPV6 Radius" |
Kunden, die diesen Artikel gesehen haben, sahen auch