Digi Connect WS
EXTENDED SAFETY WIRELESS ENABLED TERMINAL SERVER
- 1/4/8-port RS-232 serial-to-network connectivity
- 802.11 a/b/g/n Wi-Fi
- Power over Ethernet support
- IEC 60601 3rd edition compliant
- Wi-Fi Alliance Certified, WPA & WPA2 personal and enterprise, AES, TKIP, 802.11w, 802.11d, 802.11h, PMF
- VESA mountable
- TCP Socket Connectivity to individual devices
- HTTPS supported for additional security
- Ports may be connected to from different systems, OS independent
Digi Connect WS is intended to be used with a data acquisition system to connect to RS-232 serial devices and send data from these serial devices to the data acquisition system without adjusting or manipulating the format. The extended safety terminal server complies with IEC 60601-1 3rd edition and can be used in environments requiring this level of testing, including being placed within the patient environment when used as part of a medical electrical (ME) system.
The Digi Connect WS provides serial over IP connectivity for the environment that connects RS-232 devices to an information system network. It is available in three models with one, four, or eight RS-232 serial ports. Digi Connect WS supports 10/100 Ethernet and 802.11a/b/g/n compatible Wi-Fi.
Independent socket connectivity for each port gives system administrators a high level of control over networked serial devices.
The Digi Connect WS provides serial over IP connectivity for the environment that connects RS-232 devices to an information system network. It is available in three models with one, four, or eight RS-232 serial ports. Digi Connect WS supports 10/100 Ethernet and 802.11a/b/g/n compatible Wi-Fi.
Independent socket connectivity for each port gives system administrators a high level of control over networked serial devices.
FEATURE
- MANAGEMENT
HTTPS, HTTP, SNMP, Optional management through Digi Remote ManagerSM
PROTOCOLS
HTTP, HTTPS, TCP, SNMP
SECURITY
SSL, TLS
LEDS
Power, Ethernet, Serial, Wi-Fi, Find Me
DIMENSIONS (LENGTH X WIDTH X HEIGHT)
Approximately 200 mm x 160 mm x 40 mm (4 and 8 port), 140 mm x 120 mm x 40 mm (1 port)
WEIGHT
1 kg (4 and 8 port), 0.5 kg (1 port)
MOUNTING
VESA 75, Direct and Arm
INTERFACES
- SERIAL PORTS
1, 4, or 8 ports
SERIAL CONNECTOR
RJ-45 RS232
ETHERNET PORTS
1
ETHERNET PHYSICAL LAYER
10/100
WI-FI
802.11 a/b/g/n 2.4 and 5 g (can be disabled)
WI-FI MODES
Wi-Fi Alliance Cert, WPA & WPA2 personal and enterprise, AES, TKIP, PMF, 802.11d, 802.11h, 802.11w
POWER REQUIREMENTS
- POWER CONSUMPTION
WS 1: 0.1 A RMS MAX
WS 4/8: 0.25 A RMS MAX
POWER INPUT
100-240 VAC IEC 60320 C8 Connector
POWER OVER ETHERNET
802.3af
POWER SUPPLY
60601-1 Class II
SURGE PROTECTION
Per IEC 61000-4-5: ±1 kV
Per IEC 61000-4-4: ±2 kV for power supply lines (EFT)
ENVIRONMENTAL
- OPERATING TEMPERATURE
+10º C to +40º C
STORAGE TEMPERATURE
-20º C to +40º C
RELATIVE HUMIDITY
10% to 90% non-condensing
ALTITUDE
2000 meters
SERIAL PORT PROTECTION (ESD)
Per IEC 61000-4-2 ±6 kV contact; ±8 kV air
STANDARDS
- SAFETY
EN 60601-1: 2005 + corr.1 (2006) + corr.2 (2007) + A1 :2013, IEC 60601-1-2 Ed3 : 2007, IEC 60601-1-6: 2006 + A1: 2013
EMISSIONS
FCC 47 CFR Part 15 B and C, ICES-003, EN 301489-1, EN 301489-17, EN 300328, EN 62311 Wi-Fi/RF: EN 301 489-1 v1.9.2; EN 301 489-17 v2.1.1; EN 300 328 v1.8.1; EN 62311: 2008; RSS-210
IMMUNITY
EN55024, ICES-003
Clients qui ont dájà consulté cet article ont également vu