Advantech EKI-5624P & Advantech EKI-5624PI
4FE with PoE+2GE Industry Ethernet Proview PoE Switch
- Four Fast Ethernet ports comply with IEEE 802.3af/at
- PoE standard and Two Gigabit Ethernet ports
- Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- -40~65°C operating temperature range (EKI-5624PI)
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12V~24V (9V ~ 36V) power input and P-Fail relay
The EKI-5624P and EKI-5624PI switches support Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment(PSE). Also it is the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. The switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. The switches are compliant E-mark for in-vehicle application and surveillance system.
Communications
- Standard
IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az, 802.3x, 802.1p
LAN
10/100BaseT(X),10/100/1000BaseT(X)
Transmission Distance
Up to 100 m
Transmission Speed
Up to 1000 Mbps
Interface
- Connectors
4 x 10/100BaseT(X) with PoE + 2 x 10/100/1000 Base T(X)
6-pin removable screw terminal (power & relay)
LED Indicators
- System LED
P1, P2, P-Fail, Loop, PoE
Port LED status
10/100 BaseT(X) or 10/100/1000Base T(X): LNK /ACT, Speed, PoE port
Physical
- Enclosure
Metal / Aluminum Shell with solid mounting kits
Protection Class
IP30
Installation
DIN-Rail and Wall-Mount
Dimensions (W x H x D)
74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch
Environment
- Operating Temperature
Wide Temp Models: -40 to 75°C (-40 to 167°F)
Standard Models: -25 to 60°C (-4 to 140°F)
Storage Temperature
-40 ~ 85°C (-40 ~ 185°F)
Relative Humidity
10 ~ 95% (non-condensing)
Switch Properties
- MAC Address
2K entries
Packet Buffer
1 Mbit
Switching Capacity
4.8 Gbps
Power
- Power Consumption
4.2w (System)
Power Input
12-24 Vdc, (7A-3A)
Power Budget
60w @ 24v
50w @ 12v
Certification
- Safety
IEC/EN 60950, UL61010-2-201, e-Mark Comply with *Class 1 Division 2, * IECEx, *ATEX
EMC
CE, FCC, e-Mark
EMI
EN 55011/ 55022 Class A, EN 61000-6-4,FCC Part 15 Subpart B Class A
EMS
EN 55024/ EN 61000-6-2
EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3;
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3;
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Ordering Information
Available Modules | |
EKI-5624P | 4 x 10/100BaseT(X) with PoE + 2GE , -25 to 60°C operating temperature |
4 EKI-5624PI | 4 x 10/100BaseT(X) with PoE + 2GE , -40 to 65°C operating temperature |
Clients qui ont dájà consulté cet article ont également vu