MOXA MGate 5109 Series

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Gateways > MOXA MGate 5109 Series

MOXA MGate 5109 Series

1-port Modbus RTU/ASCII/TCP-to-DNP3 serial/TCP/UDP gateways

MOXA MGate 5109 Series
4728_12628.png
4728_10473.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Supports Modbus master/slave and DNP3 master/outstation
  • Up to 31 Modbus serial slaves or DNP3 serial outstations
  • Up to 32 Modbus TCP slaves or DNP3 TCP/UDP outstations
  • Supports DNP 3.0 subset level 2
  • DNP3 master mode supports up to 26600 points
  • DNP3 master and outstation modes support time-synchronization
  • Complete diagnosis information for maintenance
  • Embedded Modbus and DNP3 serial traffic monitor
  • Redundant dual DC power inputs and relay output
  • microSD card for configuration backup and system log
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV built-in isolation protection
  • Built-in Ethernet cascading for easy wiring
The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5109 supports transparent mode for easily integrating Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks.The MGate 5109 series gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, 5109 also support agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitable for industrial applications such as power, oil & gas, and water and wastewater.


Easy Configuration via Web Console

The MGate 5109 series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5109 series also supports Auto Detection for DNP3 serial outstations, allowing the MGate 5109 to automatically acquire all outstation objects when configured as a DNP3 master.


Modbus and DNP3 Protocol Traffic Monitor

The MGate 5109 series gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, or incorrect command configuration. With Modbus/DNP3 Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.


Variety of Maintenance Functions

The MGate 5109 series gateway provides a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection events and Modbus maintenance events. Users can review log data remotely through the web console.
ProdGrafik

Ethernet Interface

    Protocols
    Modbus TCP client/server, DNP 3.0 TCP/UDP master/outstation

    Number of Ports
    2 (1 IP, Ethernet cascade)

    Speed
    10/100 Mbps, Auto MDI/MDIX

    Connector
    8-pin RJ45

    Magnetic Isolation Protection
    1.5 kV (built-in)



Serial Interface

    Protocols
    Modbus RTU/ASCII Master/Slave

    Number of Ports
    1

    Serial Standards
    RS-232/422/485, software selectable

    Connectors
    DB9 male

    RS-485 Data Direction Control
    ADDC® (automatic data direction control)

    Pull High/Low Resistor for RS-485
    1 kÙ, 150 kÙ

    Terminator for RS-485
    120 Ù

    Isolation
    2 kV (built-in)



Serial Communication Parameters

    Data Bits
    7, 8

    Stop Bits
    1, 2

    Parity
    None, Even, Odd, Space, Mark

    Flow Control
    RTS/CTS, RTS Toggle (RS-232 only)

    Baudrate
    50 bps to 921.6 kbps



Serial Signals

    RS-232
    TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    RS-422
    Tx+, Tx-, Rx+, Rx-, GND

    RS-485-4w
    Tx+, Tx-, Rx+, Rx-, GND

    RS-485-2w
    Data+, Data-, GND



Modbus

    Functions Supported
    1, 2, 3, 4, 5, 6, 15, 16, 23

    Max. No. of Commands
    100

    Max. No. of Connections
    MGate as Modbus TCP Master: 32 slave connections
    MGate as Modbus TCP slave: 16 master connections



DNP3

    Max. No. of Connections
    • Transparent mode:
      16 master connections or 32 outstation connections
    • Agent mode:
      MGate as DNP3 TCP/UDP master: 32 outstation connections
      MGate as DNP3 TCP/UDP outstation: 1 master connection

    DNP3 Internal Database
    • For each outstation:
      Binary Inputs: 256 points
      Analog Inputs: 64 points
      Counters: 64 points
      Binary Outputs: 256 points
      Analog Outputs: 64 points
    • When the MGate 5109 is configured as a DNP3 outstation Bina


Software

    Configuration Options
    Web Console, Serial Console Utility

    Configuration
    MXview, SNMP (v1, v2, v3), Private



Physical Characteristics

    Housing
    Metal, IP30

    Weight
    507 g (1.12 lb)

    Dimensions
    36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)

    Storage Card Slot
    1 microSD (SDHC) card slot supports up to 32 GB

    Relay Alarm Circuit
    3-pin circuit with current carrying capacity of 2 A @ 30 VDC



Environmental Limits

    Operating Temperature
    Standard Models: 0 to 60°C (32 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

    Storage Temperature
    -40 to 85°C (-40 to 185°F)

    Ambient Relative Humidity
    5 to 95% (non-condensing)

    Vibration
    IEC 60068-2-6, IEC 60068-2-64

    Shock
    IEC 60068-2-27

    Drop
    IEC 60068-2-32



Power Requirements

    Input Voltage
    12 to 48 VDC

    Input Current
    455 mA @ 12 VDC; 125 mA @ 48 VDC

    Power Connector
    Terminal block



Standards and Certifications

    Safety
    UL 508, EN 60950-1

    Hazardous Location
    Class 1 Division 2, ATEX, IECEx

    EMC
    EN 55022/24

    EMI
    CISPR 22, FCC Part 15B Class B

    EMS
    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m
    IEC 61000-4-8 PFMF



MTBF (mean time between failures)

    Time
    859,422 hrs

    Standard
    Telcordia SR332





ORDERING INFORMATION
Available Models
MGate 5109 1-port Modbus-to-DNP3 gateway, 0 to 60°C operating temperature
MGate 5109-T 1-port Modbus-to-DNP3 gateway, -40 to 75°C operating temperature
Optional Accessories
  • DIN Rail Power Supplies
DR-4524 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature
DR-75-24 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature
DR-120-24120W/5A DIN-Rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature
  • Connectors
Mini DB9F-to-TB DB9 Female to Terminal Block connector



Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.