Advantech Conel BB-SR30300125-SWH
LTE Router,5E, USB, 2 I/O, SD, 2S, SL, Acc, SmartWorx Hub
- Powerful CPU and enhanced memory to support high demand customer applications
- Extended operational temperature range from -40 °C to +75 °C
- 10-60 VDC operated with transient and reverse polarity voltage protection
- GPS and GLONASS support
- MicroSD card holder
- Low power consumption mode for solar and battery power applications
- PoE PD, PoE PSE, In/Out, USB Host
- Advanced security features
The SmartFlexTM is designed and manufactured for use in tough environmental conditions. Specifications include wide operating temperature ranges from -40 to 75 °C (-20 to 60 °C LTE450 module). It accepts input voltage ranges from 10 V DC to 60 V DC and is equipped with sleep mode for reducing electrical consumptio.
The SmartFlex TM cellular router provides secure Internet connectivity for devices and LANs via the cellular networks. It can be used to pro- vide automatic wireless failover for wired networks, wireless connectivity for devices in remote locations where cable connections are impractical, and wireless connectivity for mobile assets. With upload speeds of up to 50 Mbit/s and download speeds of up to 100 Mbps, the SmartFlex TM provides ample bandwidth, even for applications that require video.
The SmartFlex TM is designed and manufactured for use in tough environmental conditions. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module). It accepts input voltage ranges from 10 V DC to 60 V DC and is equipped with sleep mode for reducing electrical consumption.
The SmartFlex TM places intelligence out at the network edge with an extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartFlex TM from remote locations. The router can also upgrade its configuration and firm- ware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.
The flexible SmartFlex TM can be configured to suit any application. The standard configuration includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module). Further optional boards available: 3x ETH (the router can be configured with up to 5 total Ethernet ports and 3 independent LANs/IP addresses) or ETH - RS232 - RS485 (isolation strenght up to 2.5kV) or RS232 - RS485 (isolation strenght up to 2.5kV) or RS232.
The SmartFlex TM supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet.
The SmartFlex TM cellular router provides secure Internet connectivity for devices and LANs via the cellular networks. It can be used to pro- vide automatic wireless failover for wired networks, wireless connectivity for devices in remote locations where cable connections are impractical, and wireless connectivity for mobile assets. With upload speeds of up to 50 Mbit/s and download speeds of up to 100 Mbps, the SmartFlex TM provides ample bandwidth, even for applications that require video.
The SmartFlex TM is designed and manufactured for use in tough environmental conditions. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module). It accepts input voltage ranges from 10 V DC to 60 V DC and is equipped with sleep mode for reducing electrical consumption.
The SmartFlex TM places intelligence out at the network edge with an extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartFlex TM from remote locations. The router can also upgrade its configuration and firm- ware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.
The flexible SmartFlex TM can be configured to suit any application. The standard configuration includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module). Further optional boards available: 3x ETH (the router can be configured with up to 5 total Ethernet ports and 3 independent LANs/IP addresses) or ETH - RS232 - RS485 (isolation strenght up to 2.5kV) or RS232 - RS485 (isolation strenght up to 2.5kV) or RS232.
The SmartFlex TM supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet.
TECHNICAL SPECIFICATION
Power, Consumption, Environmental, IP cover
- Power supply
10 – 60 VDC (2–Way Molex connector)
Power consumption – Idle / Average / Peak / Sleep Mode
2.5 W / 4W / 11 W / 10 mW
Temperature range – Operating / Storage
-40 to +75 °C / -40 to +85 °C
Temperature range LTE450 – Operating / Storage
-20 to +60 °C / -40 to +85 °C
Humidity – Operating / Storage (non condensing)
0 to 95 % / 0 to 95 %
Cold Start
-35 °C
Operating Altitude
2000 m / 70 kPa
Ingress Protection Rating
IP30
Cellular module parameters
SR303 - EMEA Region | SR306 - APAC & LATAM | SR307 - LTE450 | |
LTE | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 8 compliant Supported frequencies: 800/900/1800/2100/2600 MHz | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 9 compliant Supported frequencies: 800/900/1800/2100/2600 MHz | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 9 compliant Supported frequencies: 450/800/1800/2600 MHz |
WCDMA | Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 900/2100 MHz | Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 850/900/1900/2100 MHz | Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 900/2100 MHz |
GPRS/EDGE | Bit rate 237 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 900/1800/1900 MHz | Bit rate 236 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 850/900/1800/1900 MHz | Bit rate 236 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 900/1800 MHz |
WiFi - 802.11 a/b/g/n, AP or Client modes
- Supported WiFi band
2.4 GHz, 5.4 GHz
Number of clients:
10
Encryption:
None, WEP, TKIP, AES
Authentication:
Open, Shared, WPA–PSK, WPA2–PSK
5 GHz supported channels
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
2.4 GHz supported channels
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
Industry Certifications & Approvals
- Radio for general LTE
ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1, ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13 v5.2.1
Radio for LTE450
ETSI EN 301 908-1 v6.2.1, ETSI EN 301 908-13 v6.2.1, ETSI EN 301 489-24 v1.5.1
Emissions/ Immunity
IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2, EN 55022:2010
Safety
EN 60950-1:06 ed.2 (not Hazardous Locations), EN 62311:2008
Vehicle
E8
Environmental
RoHS, RoHS2, REACH, WEEE
Mechanical
- Plastic or metal case with plastic or metal DIN rail
Enclosure Dimensions
87x30x127mm (150mm including wall month sides)
Weight Plast/Metal
170 g/375 g
Features
- Network and Routing
DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging
Security
HTTPS, SSH, VPN tunnels, SFTP
Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
VPN tunnelling
Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN
IPSec with IKEv1 and IKEv2
Configuration Firmware Management
Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server
Backup configuration, Restore configuration
Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS),
Over-the-Air software updates, Over-the-Air cellular module update from FW
Diagnostic
One CLICK report – current configuration / factory identification / system log / kernel log / reboot log /routing table, Remote diagnostics possible via SSH
Status
Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days
Log
System Log, Reboot Log, Kernel Log
Controling and diagnostic
SMS, SNMP v1/v2c/v3, Statuses, Log
Event Engine
StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature.
Report Types: RAP, SMS, email, SNMP Trap, TCP (csv, xml, binary)
Support and Warranty
3 years warranty, Free device software upgrades, Optional warranty extension
Other
Support of IPv6
Ports, LED, Antennas
- Up to 5x ETH ports
RJ45, 10/100 Mbps
SIM
2 Mini SIMs (2FF) (rear panel)
LED Indicators
PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT
3x ANT - ANT, DIV, GPS (no for LTE450 model)
SMA connectors
WiFi antenna - *optional
R-SMA connector
USB
USB Host connector 2.0
I/O
6-Way Molex connector – 2x binary input, 1x binary output
SD Card
1x Micro SD Card slot (rear panel)
RST
RESET button (rear panel)
*optional 3-port SWITCH
3x RJ45, 10/100 Mbps
*optional ETH - RS232 - RS485
RJ45, 4pin terminal block, 3pin terminal block connectors
Isolation up to 2.5 kV
*optional RS232 - RS485
5pin terminal block, 4pin terminal block connectors
Isolation up to 2.5 kV
*optional RS232
RJ45
Clients qui ont dájà consulté cet article ont également vu