Advantech BB-FOSTCDRI-PH-SC
Heavy Industrial Serial to Single-Mode SC Fiber Optic Converter
- IEEE-61850-3, IEEE-1613
- Single Mode, SC Fiber
- -40 to 85ˇăC Operating Temperature
- Rugged, IP30 Metal Panel Mount Case
- 50G Shock, 4G Vibration
- 2kV Triple Isolation
The BB-FOSTCDRI-PH-SC series are premium heavy industrial serial to fiber optic converters. Designed for rugged industrial environments, they have been put through most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, they are suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.
Packaged in a rugged IP30 metal case, these units convert serial signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.
In addition to direct point-to-point connectivity, operation in multi-drop mode is possible enabling serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add EMI/RFI protection inherent to fiber optic communications.
Packaged in a rugged IP30 metal case, these units convert serial signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.
In addition to direct point-to-point connectivity, operation in multi-drop mode is possible enabling serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add EMI/RFI protection inherent to fiber optic communications.
SERIAL TECHNOLOGY
- Data Rate
9.6 to 115.2 kbps
RS-232
- Connector
Removable terminal block
Signals
TD, RD, GND
RS-422/485
- Connector
5-position, removable terminal block
RS-485, 2-wire
Data A(-), Data B(+), GND
RS-422/485, 4-wire
TDA(-), TDB(+), RDA(-), RDB(+), GND
- Bias
Built-in, switchable, 1.2K¦¸
Termination
Built-in, switchable, 120¦¸
ISOLATION
- Rating
2KV RMS, 1 minute
Surge Protection
600 W peak power dissipation
Clamping Time
< 1 pico-second
Lines Protected
2-way (input, output lines)
Method
Optical
FIBER OPTIC TECHNOLOGY
- Type / Wavelength
Multi-mode / 820 nm
Output Power
-16dBm min, -12dBm typical, -9dBm maximum
Receive Sensitivity
-24dBm min, -25.4dBm maximum
Cable
62.5/125 micro-meter
Connector
ST
Data Rate
9.6 to 115.2 kbps
Maximum Distance
4 km (2.5 mi)
Idle State, FOSTCDRI
Transmitter light ON
Idle State, FOSTCDRI-INV
Transmitter light OFF
INDUSTRIAL BUS
- Modbus
ASCII/RTU
POWER
- Source
External
Input Voltage
10 to 48 VDC (56 VDC maximum)
Consumption
0.5 W (typical), 1.3W (with termination)
Connector
2-position, removable terminal block, 24 to 14 AWG
TERMINAL BLOCKS
- Wire Size Accepted
28 to 12 AWG
Pitch
5.08 mm
Insulation Resistance
ˇÝ 500 M¦¸ @ 500 VDC
Maximum Torque
5 Kg / cm
LED INDICATORS
- Power
Red LED
FO Receive
Red LED
FO Transmit
Red LED
MECHANICAL
- Dimensions
12.3 x 11.3 x 3.2 cm (4.9 x 4.5 x 1.3 in)
Enclosure
IP 20 plastic, 35 mm DIN mount
Weight
199.6 g (0.44 lbs)
ENVIRONMENTAL
- Operating Temperature
-40 to +80 ˇăC (-40 to +176 ˇăF)
Storage Temperature
-40 to +85 ˇăC (-40 to +185 ˇăF)
Operating Humidity
0 to 95% non-condensing
MTBF
138904 hours
MTBF Calculation Method
Parts Count Reliability Prediction
APPROVALS / CERTIFICATIONS - FOSTCDRI
- UL Class 1 Division 2, Groups A, B, C, D
File Number: E222870 (HAZLOC E245458)
FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class B Emissions
CE
EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and Light-Industrial Environments
EN 61000-4-2: 2009 Electro-Static Discharge (ESD)
EN 61000-4-3: 2006 +A1 +A2 +IS1 Radiated Field Immunity (RFI)
EN 61000-4-4: 2012 Electrical Fast Transients-Burst Immunity (EFT)
EN 61000-4-6: 2009 Conducted Immunity
Download complete Declaration of Conformity at www.bb-elec.com
APPROVALS / CERTIFICATIONS - FOSTCDRI-INV
- UL 508, File Number: E222870
FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class A Emissions
CE
ORDERING INFORMATION
MODEL NUMBER | DESCRIPTION |
BB-FOSTCDRI-PH-MC | Serial to Multi-mode SC Converter |
BB-FOSTCDRI-PH-MT | Serial to Multi-mode ST Converter |
BB-FOSTCDRI-PH-SC | Serial to Single-mode SC Converter |
I clienti che hanno visto questo prodotto hanno anche consultato