Advantech BB-FOSTCDRI-PH-SC

The BB-FOSTCDRI-PH-SC series are premium heavy industrial serial to fiber optic converters. Designed for rugged industrial environments, they have been put through most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, they are suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.

Packaged in a rugged IP30 metal case, these units convert serial signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.

In addition to direct point-to-point connectivity, operation in multi-drop mode is possible enabling serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add EMI/RFI protection inherent to fiber optic communications.

SERIAL TECHNOLOGY

Data Rate
9.6 to 115.2 kbps

RS-232


Connector
Removable terminal block

Signals
TD, RD, GND

RS-422/485


Connector
5-position, removable terminal block

RS-485, 2-wire
Data A(-), Data B(+), GND

RS-422/485, 4-wire
TDA(-), TDB(+), RDA(-), RDB(+), GND


Bias
Built-in, switchable, 1.2K¦¸

Termination
Built-in, switchable, 120¦¸

ISOLATION

Rating
2KV RMS, 1 minute

Surge Protection
600 W peak power dissipation

Clamping Time
< 1 pico-second

Lines Protected
2-way (input, output lines)

Method
Optical

FIBER OPTIC TECHNOLOGY

Type / Wavelength
Multi-mode / 820 nm

Output Power
-16dBm min, -12dBm typical, -9dBm maximum

Receive Sensitivity
-24dBm min, -25.4dBm maximum

Cable
62.5/125 micro-meter

Connector
ST

Data Rate
9.6 to 115.2 kbps

Maximum Distance
4 km (2.5 mi)

Idle State, FOSTCDRI
Transmitter light ON

Idle State, FOSTCDRI-INV
Transmitter light OFF

INDUSTRIAL BUS

Modbus
ASCII/RTU

POWER

Source
External

Input Voltage
10 to 48 VDC (56 VDC maximum)

Consumption
0.5 W (typical), 1.3W (with termination)

Connector
2-position, removable terminal block, 24 to 14 AWG

TERMINAL BLOCKS

Wire Size Accepted
28 to 12 AWG

Pitch
5.08 mm

Insulation Resistance
¡Ý 500 M¦¸ @ 500 VDC

Maximum Torque
5 Kg / cm

LED INDICATORS

Power
Red LED

FO Receive
Red LED

FO Transmit
Red LED

MECHANICAL

Dimensions
12.3 x 11.3 x 3.2 cm (4.9 x 4.5 x 1.3 in)

Enclosure
IP 20 plastic, 35 mm DIN mount

Weight
199.6 g (0.44 lbs)

ENVIRONMENTAL

Operating Temperature
-40 to +80 ¡ãC (-40 to +176 ¡ãF)

Storage Temperature
-40 to +85 ¡ãC (-40 to +185 ¡ãF)

Operating Humidity
0 to 95% non-condensing

MTBF
138904 hours

MTBF Calculation Method
Parts Count Reliability Prediction

APPROVALS / CERTIFICATIONS - FOSTCDRI

UL Class 1 Division 2, Groups A, B, C, D
File Number: E222870 (HAZLOC E245458)
FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class B Emissions

CE
EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and Light-Industrial Environments
EN 61000-4-2: 2009 Electro-Static Discharge (ESD)
EN 61000-4-3: 2006 +A1 +A2 +IS1 Radiated Field Immunity (RFI)
EN 61000-4-4: 2012 Electrical Fast Transients-Burst Immunity (EFT)
EN 61000-4-6: 2009 Conducted Immunity
Download complete Declaration of Conformity at www.bb-elec.com

APPROVALS / CERTIFICATIONS - FOSTCDRI-INV

UL 508, File Number: E222870
FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class A Emissions
CE

ORDERING INFORMATION

MODEL NUMBER	DESCRIPTION
BB-FOSTCDRI-PH-MC	Serial to Multi-mode SC Converter
BB-FOSTCDRI-PH-MT	Serial to Multi-mode ST Converter
BB-FOSTCDRI-PH-SC	Serial to Single-mode SC Converter