Advantech BB-FOSTCDRI

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Serial > Advantech BB-FOSTCDRI

Advantech BB-FOSTCDRI

Triple Isolated RS-232/422/485 to Fiber Converter

Advantech BB-FOSTCDRI
4578_33049.png
4578_10034.png
4578_33050.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Data rates up to 115.2 kbps
  • 10 ¨C 48 VDC input power range
  • Wide operating temperature
  • 2,000V, 3-way optical isolation
  • Modbus ASCII/RTU compatible
  • EMI / RFI protection
  • UL Class 1/Division 2
  • Inverted fiber state option (Model FOSTCDRI-INV)
  • TD, RD and Power LEDs
Model FOSTCDRI is Advantech B B SmartWorx¡¯ premium industrial serial to multi-mode fiber optic converter. Its rugged design is UL approved and certified for Class 1/Division 2 industrial environments. It extends data communications up to 4km (2.5 miles) . It provides three-way optical isolation on the input, output and power lines. In addition to direct point-to-point connectivity, it is capable of operating in a multi-drop mode. This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other converters and isolators and add the EMI / RFI protection inherent to fiber optic communications. In RS-232 mode, the converter supports Transmit and Receive data. Handshaking signals are not passed through. An Automatic Send Data Control circuit controls the RS-422/485 driver chip, eliminating the requirement for external software. Easy to install and configure, it has a 12-position DIP switch on the bottom to configure RS-422/485 parameters. Serial data and power cables connect to removable terminal blocks. ST connectors are used for the fiber.
ProdGrafik

SERIAL TECHNOLOGY

    Data Rate
    9.6 to 115.2 kbps

    RS-232
      Connector
      Removable terminal block
      Signals
      TD, RD, GND

    RS-422/485
      Connector
      5-position, removable terminal block

    RS-485, 2-wire
    Data A(-), Data B(+), GND

    RS-422/485, 4-wire
    TDA(-), TDB(+), RDA(-), RDB(+), GND

      Bias
      Built-in, switchable, 1.2K¦¸

      Termination
      Built-in, switchable, 120¦¸


ISOLATION

    Rating
    2KV RMS, 1 minute

    Surge Protection
    600 W peak power dissipation

    Clamping Time
    < 1 pico-second

    Lines Protected
    2-way (input, output lines)

    Method
    Optical


FIBER OPTIC TECHNOLOGY

    Type / Wavelength
    Multi-mode / 820 nm

    Output Power
    -16dBm min, -12dBm typical, -9dBm maximum

    Receive Sensitivity
    -24dBm min, -25.4dBm maximum

    Cable
    62.5/125 micro-meter

    Connector
    ST

    Data Rate
    9.6 to 115.2 kbps

    Maximum Distance
    4 km (2.5 mi)

    Idle State, FOSTCDRI
    Transmitter light ON

    Idle State, FOSTCDRI-INV
    Transmitter light OFF


INDUSTRIAL BUS

    Modbus
    ASCII/RTU


POWER

    Source
    External

    Input Voltage
    10 to 48 VDC (56 VDC maximum)

    Consumption
    0.5 W (typical), 1.3W (with termination)

    Connector
    2-position, removable terminal block, 24 to 14 AWG


TERMINAL BLOCKS

    Wire Size Accepted
    28 to 12 AWG

    Pitch
    5.08 mm

    Insulation Resistance
    ¡Ý 500 M¦¸ @ 500 VDC

    Maximum Torque
    5 Kg / cm


LED INDICATORS

    Power
    Red LED

    FO Receive
    Red LED

    FO Transmit
    Red LED


MECHANICAL

    Dimensions
    12.3 x 11.3 x 3.2 cm (4.9 x 4.5 x 1.3 in)

    Enclosure
    IP 20 plastic, 35 mm DIN mount

    Weight
    199.6 g (0.44 lbs)


ENVIRONMENTAL

    Operating Temperature
    -40 to +80 ¡ãC (-40 to +176 ¡ãF)

    Storage Temperature
    -40 to +85 ¡ãC (-40 to +185 ¡ãF)

    Operating Humidity
    0 to 95% non-condensing

    MTBF
    138904 hours

    MTBF Calculation Method
    Parts Count Reliability Prediction


APPROVALS / CERTIFICATIONS - FOSTCDRI

    UL Class 1 Division 2, Groups A, B, C, D
    File Number: E222870 (HAZLOC E245458)
    FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class B Emissions

    CE
    EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and Light-Industrial Environments
    EN 61000-4-2: 2009 Electro-Static Discharge (ESD)
    EN 61000-4-3: 2006 +A1 +A2 +IS1 Radiated Field Immunity (RFI)
    EN 61000-4-4: 2012 Electrical Fast Transients-Burst Immunity (EFT)
    EN 61000-4-6: 2009 Conducted Immunity

    Download complete Declaration of Conformity at www.bb-elec.com


APPROVALS / CERTIFICATIONS - FOSTCDRI-INV

    UL 508, File Number: E222870
    FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class A Emissions
    CE



ORDERING INFORMATION

MODEL NUMBER SERIAL CONNECTOR FIBER CONNECTOR ISOLATION
BB- FOSTCDRI Terminal Block Multi-mode ST 2,000 V
BB-FOSTCDRI-INV Terminal Block Multi-mode ST 2,000 V



Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.