The PoE Giga-MiniMc/LFPT are low-cost, compact, multi-port media converters that support PoE standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever-expanding versatility of the MiniMc product line. Featuring 2-10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE Giga-MiniMc are Power Source Equipment (PSE) devices. The PoE Giga-MiniMc is capable of powering up to two Powered Devices (PD) over standard CAT5 cable or better. The PoE Giga-MiniMc/LFPT is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more power than the typical 15.4 W provided by standard PSE devices. The PoE Giga-MiniMc/LFPT models are fully compatible with the IEEE 802.3af/at standards to ensure a seamless integration into your network. Enhanced features include store-and-forward, Autocross, an LFPT DIP Switch, and PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.
IEEE 802.3 10Base-T twisted pair IEEE 802.3u 100Base-TX twisted pair IEEE 802.3ab 1000Base-T twisted pair IEEE 802.3z 1000Base-LX or SX fiber IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3u Auto-Negotiation RFC-2474 RFC-2475 DiffServ QoS Extreme temperature range (DC configuration) Plug-and-play operation Accepts RJ45, SC and SFP connectors 50/125μm or 62.5/125μm multi-mode fiber 9/125μm single-mode fiber Single-strand fiber and CWDM models Country-specific, high-reliability power adapter FX and TX Auto Negotiation AutoCross for MDI/MDIX MTU: Supports Jumbo Frames up to 10240 bytes Supports DIN Rail mounting (DIN clips sold separately) Link Fault Pass Through DIP Switch
Dimensions 0.80” H x 3.645” W x 3.82” D (2.032 cm x 9.258 cm x 9.7028 cm)