Advantech BB-WSD2CA2
Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, Conduit Connector
- Ultra low power 802.15.4e SmartMesh IP technology
- Communicates with Spectre Network Gateway via highly scalable and reliable wireless mesh networks
- Connect to industry standard analog sensors
- Wzzard app lets you read or configure the nodes using Android tablets and smart phones
- Rugged, IP66-rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Class 1 DIV 2 approved for hazardous locations
Wireless Connectivity Where You Need It
The Wzzard™ intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and your application, on your network or on the Internet. The platform uses Intelligent Edge Nodes, a wireless 802.15.4e SmartMesh IP network to transmit sensor data to the Spectre Network Gateway. The Spectre Network Gateway can connect to the Internet via wired connections or the cellular data networks and communicate with application platforms using the MQTT IoT protocol and JSON data formats.
The Wzzard Intelligent Edge Nodes nodes accommodate virtually any industry-standard external sensors. Connections can be made via conduit fitting, cable gland or an M12 connector. The Nodes provide a wide variety of sensor interface options, including general purpose analog inputs, digital input/output and thermocouple. They can also contain internal sensors like an accelerometer, depending upon the model number. All 802.15.4e Wzzard Intelligent Edge Nodes contain an internal temperature sensor.
Secure, Reliable and Highly Scalable Wireless Networking
The Wzzard platform uses mesh networking and time-synchronized channel hopping to provide up to 99.999% connectivity, even in the most demanding RF environments. New nodes may be added at any time, and the SmartMesh IP network will dynamically self-configure as new nodes are added or removed. This is a function of the mesh network itself, and does not need to be controlled by the network gateway.
Easy Configuration and Installation
Configuration of the Wzzard sensor platform is easy via Android smart phones or tablets. Using the Wzzard app, your handheld devices can configure the Wzzard Intelligent Edge Nodes over their Bluetooth LE connections. The Wzzard Intelligent Edge Nodes can be configured with calibration and scaling information, eng. units, friendly names, geolocation and other descriptive information. The platform simplifies physical installation as well. The Wzzard Intelligent Edge Nodes can be attached to any surface using screws or their embedded magnetic bases. The IP66-rated, fiber reinforced polyester PBT housing makes the units deployable in virtually any industrial or commercial environment.
Intelligence at the Network Edge
The Wzzard wireless platform places intelligence at the network edge. The Wzzard Intelligent Edge Nodes can be configured to communicate data only when specified threshold or alert levels are exceeded. When reporting, they can associate useful information like geolocation, device name and uptime. This eliminates unnecessary network traffic, eases the processing burden on upstream resources, and cuts the cost of cellular data plans when the Gateway is using the cellular data network. Thanks to low-power wireless technology and programmable time synchronization, the Intelligent Edge Nodes can operate for multiple years on battery power.
The Wzzard™ intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and your application, on your network or on the Internet. The platform uses Intelligent Edge Nodes, a wireless 802.15.4e SmartMesh IP network to transmit sensor data to the Spectre Network Gateway. The Spectre Network Gateway can connect to the Internet via wired connections or the cellular data networks and communicate with application platforms using the MQTT IoT protocol and JSON data formats.
The Wzzard Intelligent Edge Nodes nodes accommodate virtually any industry-standard external sensors. Connections can be made via conduit fitting, cable gland or an M12 connector. The Nodes provide a wide variety of sensor interface options, including general purpose analog inputs, digital input/output and thermocouple. They can also contain internal sensors like an accelerometer, depending upon the model number. All 802.15.4e Wzzard Intelligent Edge Nodes contain an internal temperature sensor.
Secure, Reliable and Highly Scalable Wireless Networking
The Wzzard platform uses mesh networking and time-synchronized channel hopping to provide up to 99.999% connectivity, even in the most demanding RF environments. New nodes may be added at any time, and the SmartMesh IP network will dynamically self-configure as new nodes are added or removed. This is a function of the mesh network itself, and does not need to be controlled by the network gateway.
Easy Configuration and Installation
Configuration of the Wzzard sensor platform is easy via Android smart phones or tablets. Using the Wzzard app, your handheld devices can configure the Wzzard Intelligent Edge Nodes over their Bluetooth LE connections. The Wzzard Intelligent Edge Nodes can be configured with calibration and scaling information, eng. units, friendly names, geolocation and other descriptive information. The platform simplifies physical installation as well. The Wzzard Intelligent Edge Nodes can be attached to any surface using screws or their embedded magnetic bases. The IP66-rated, fiber reinforced polyester PBT housing makes the units deployable in virtually any industrial or commercial environment.
Intelligence at the Network Edge
The Wzzard wireless platform places intelligence at the network edge. The Wzzard Intelligent Edge Nodes can be configured to communicate data only when specified threshold or alert levels are exceeded. When reporting, they can associate useful information like geolocation, device name and uptime. This eliminates unnecessary network traffic, eases the processing burden on upstream resources, and cuts the cost of cellular data plans when the Gateway is using the cellular data network. Thanks to low-power wireless technology and programmable time synchronization, the Intelligent Edge Nodes can operate for multiple years on battery power.
POWER
MECHANICAL
TECHNOLOGY
ENVIRONMENTAL
WIRELESS SECURITY
SENSOR INTERFACE SPECIFICATIONS
DIGITAL INPUTS
RATE/FREQUENCY INPUTS
COUNTER INPUT
ANALOG INPUTS
THERMOCOUPLE INPUT
DIGITAL OUTPUTS
APPROVALS AND CERTIFICATIONS
ENVIRONMENTAL
FCC/IC
SAFETY
REGULATORY APPROVALS
- Internal
(2) 3.6V 2400 mAH Lithium Thionyl Chloride AA batteries
Battery Life
Multiyear based on 1 min sensor sampling and reporting
Optional External Input Voltage
3.3 VDC +/- 5%
MECHANICAL
- Physical Connection
M12 Connector
1/2” (12.7 mm) Conduit, sensor interface cable
included; 8 wire, 26 gage, 6 ft. (1.8 m)
Sensor Inputs
Analog Input (0 - 5 VDC, 0 – 20 mA, 4 – 20 mA)
Digital Input (0-48 VDC)
Digital Input Frequency 1-1K Hz
(Accuracy + or – 1 Hz)
Digital Input Counter
Integrated Accelerometer 3 Axis
Integrated Temperature
Thermocouple J, K Type
Digital Output (0-30 VDC)
Optional External Antenna
RP-SMA, Omnidirectional, 3.8 dBi, 2.4 GHz
Dimensions 7.64 inches (194 mm)
Mounting
Magnetic mounting via internal magnet
Pull force 4.7 lbs (2.13 kg)
(4) Mounting ears, M5 (#10)
Enclosure
IP66-rated, fiber reinforced polyester PBT
Weight
0.75 lbs (0.34 kg)
TECHNOLOGY
- Wireless
802.15.4e, SmartMesh IP
Protocols
MQTT-SN, MQTT, JSON
Bluetooth
Bluetooth 4.0 Low Energy (LE)
LED
Network Connectivity
ENVIRONMENTAL
- Installation
Indoor or outdoor
Operating Temperature
-40 to 80°C (-40 to 176°F)
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
WIRELESS SECURITY
- Device Authentication
128 bit AES-based encryption with multiple keys
Message integrity check (MIC)
Synchronized key changeovers
Customized key rotation
SENSOR INTERFACE SPECIFICATIONS
DIGITAL INPUTS
- Voltage range
0 – 48 VDC
V IL
0.97 V Maximum
V IH
1.8 V Minimum
Pull up current
32uA
Type
Sourcing (PNP)/Sinking (NPN) Software selectable input
Isolation
None
RATE/FREQUENCY INPUTS
- Frequency
Does a 1 second measurement at each measurement/publish interval
Digital Input Frequency 1-1K Hz (Accuracy + or – 1 Hz)
Uses the falling edge or rising edge based on the Invert Enabled setting
COUNTER INPUT
- Channels
Actively counts either the falling edge (Invert enabled) or rising edge (Invert disabled)
Can use a multiplier to convert to a unit type or count
2 selectable/shared with Digital inputs
Rolls over at 999999.9
ANALOG INPUTS
- Input ranges
0 - 5 VDC, 0 – 20 mA, 4 – 20 mA
Resolution
12 bit
Input load resistance
100 Mega ohm (0-5VDC), 250 ohm (0 - 20 ma)
Accuracy
Voltage: 0.10% of full scale reading, 0.20% max.
Current: 0.11% of full scale reading, 0.24% max.
THERMOCOUPLE INPUT
- Types Supported
J and K
Ranges Supported
Type J -210 to +1,200 °C
Type K -270 to +1,372 °C
Resolution
0.25 °C
Accuracy
Typical +/- 2 °C
+/- 6 °C over the temperature range of -40 to 80 °C
DIGITAL OUTPUTS
- Voltage range
0 - 30 VDC
Output Type
Open Drain
Output Current
Not to be less than 100ma
Protection
Current Limit Protection
Isolation
None
APPROVALS AND CERTIFICATIONS
- CE
EN55022 | CISPR (EN55022) Class A |
EN 61000-6-2:2005 | Generic immunity standard for (heavy) industrial environments |
EN 61000-6-4:2006+A1:2011 | Emission standard for (heavy) industrial environments |
EN61000-4-2 | ESD +/- 8kV air, +/- 4kV contact |
EN61000-4-3 | RFI |
EN61000-4-4 | EFT |
EN61000-4-5 | Surge |
EN61000-4-6 | CI |
EN60255-21-1 | Vibration, 2g, 10-500Hz 0.3mm displacement |
EN60255-21-2 | Shock, 50g, 11ms half sine wave, 18 shocks |
ENVIRONMENTAL
- IEC 60068-2-6:2007 Vibration, 2g, 10-500 Hz,1.5mm displacement
IEC 60068-2-27:2008 Shock, 50g, 11ms half sine wave, 18 shocks
FCC/IC
- FCC Part 15 Class A
FCC - Part 15.247
Industry Canada - RSS210
SAFETY
- UL/CSA Class 1, Division 2 Group A, B, C, D
REGULATORY APPROVALS
- ROHS and WEEE Compliant
ORDERING INFORMATION | |
MODEL NUMBER | THERMOCOUPLE INPUT |
BB-WSD2CTJ | Wireless Mesh 802.15.4e, 2 Thermocouple J-type Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CTJ | Wireless Mesh 802.15.4e, 2 Thermocouple J-type Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
BB-WSD2CTK | Wireless Mesh 802.15.4e, 2 Thermocouple K-type Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CTK | Wireless Mesh 802.15.4e, 2 Thermocouple K-type Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
MODEL NUMBER | ACCELEROMETER |
BB-WSD2XV0 | Wireless Mesh 802.15.4e Integrated Accelerometer; External Antenna |
BB-WSD1XV0 | Wireless Mesh 802.15.4e Integrated Accelerometer; Internal Antenna |
MODEL NUMBER | ANALOG INPUT |
BB-WSD2MA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, M12 Connector |
BB-WSD1MA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; Internal Antenna, M12 Connector |
BB-WSD2CA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
BB-WSD2CJA | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output, 2 Thermocouple J-type Inputs; External Antenna, Conduit Connector |
BB-WSD2MA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; External Antenna, M12 Connector |
BB-WSD1MA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; Internal Antenna, M12 Connector |
BB-WSD2CA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; External Antenna, Conduit Connector |
BB-WSD1CA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; Internal Antenna, Conduit Connector |
MODEL NUMBER | DIGITAL INPUT |
BB-WSD2MD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; External Antenna, M12 Connector |
BB-WSD1MD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; Internal Antenna, M12 Connector |
BB-WSD2CD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; External Antenna, Conduit Connector |
BB-WSD1CD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; Internal Antenna, Conduit Connector |
ACCESSORIES | |
PART NUMBER | DESCRIPTION |
ACH2-DBAT-DP003 | External Antenna, 2.4 GHz, 2 dBi, Dipole, RP-SMA, hinged, 3.8 dBi |
ACH2-AT-DP011 | Magnetic Mount Antenna, 2.4 GHz, 3.8 dBi |
WSCAC0-6 | Pigtail Cable 6 ft (1.8m) |
WSCAM12-6 | M12 Wiring harness cable, 8 pin, 6 ft (1.8 m) |
ZXTMT | Cable Gland/Conduit Kit |
I clienti che hanno visto questo prodotto hanno anche consultato