Advantech BB-UHR207
Rugged 7 Port USB Hub
- Expands one USB port to 7 USB ports (USB 2.0)
- ESD Level 4 (contact 8 kV, air 15 kV) Performance Criteria B
- Data rate: 480 Mbps full speed
- Wide operating temperature: -40 to +80 °C
- Rugged metal case - desk, DIN rail or panel mount (brackets included)
- FCC, CE, UL, EMC heavy industrial
- High retention USB port connectors
- USB cable included, 1.8 m (6 ft)
- External power source required (not included, sold separately)
The UHR207 and UHR307 are Industrial Grade Seven Port USB Hubs. Model UHR307 includes 4 kV isolation. They are designed and tested to meet heavy industrial EMC standards. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications – requiring up to 3.2 lbs-force to disconnect them.
The Heavy Industrial EMC specifications allow these hubs to operate where standard office grade hubs fail – such as near variable frequency drives, motor control centers, welding, and other large electrical loads. 4 kV Isolation (UHR307) between the upstream and downstream USB ports protects expensive equipment from dangerous ground loops and helps ensure data integrity.
They are powered from an external 10 to 30 VDC source. Two power connectors are provided – terminal block or threaded / lockable barrel plug. Refer to ordering information for power supply recommendation. Each downstream port provides up to 500 mA of power to connected USB devices.
The Heavy Industrial EMC specifications allow these hubs to operate where standard office grade hubs fail – such as near variable frequency drives, motor control centers, welding, and other large electrical loads. 4 kV Isolation (UHR307) between the upstream and downstream USB ports protects expensive equipment from dangerous ground loops and helps ensure data integrity.
They are powered from an external 10 to 30 VDC source. Two power connectors are provided – terminal block or threaded / lockable barrel plug. Refer to ordering information for power supply recommendation. Each downstream port provides up to 500 mA of power to connected USB devices.
USB INTERFACE
POWER
INDICATORS
MECHANICAL
ENVIRONMENTAL
APPROVALS/CERTIFICATIONS
- Standards
USB 1.1 & 2.0
Upstream Port
(1) Type B Female – High Retention
Downstream Port
(7) Type A Female – High Retention
Speed
12 Mbps – Model UHR207
480 Mbps – Model UHR307
Multi-transaction Translator, 1 per port
Isolation
UHR307 - 4 kV – Upstream to Downstream
Surge Protection
+/- 0.5 kV DC Ports, +/- 1 kV Signal Ports
ESD
15 kV Air, 8 kV Contact
High Retention
USB Ports require 15 N (3.2 lbs-force) withdrawal force using standard USB Cable
POWER
- Source
External
Power Connector
Terminal Block or threaded barrel jack
Input Voltage
10 to 30 VDC
Power
30 Watts
Power TB
3 Position, 5.08 mm spacing, 28-12 AWG, Solid Wire
Barrel Jack
Locking / Threaded, 5.5 mm,Center Positive
Downstream Power
500 mA per port
INDICATORS
- Power
Green LED
Port Ready
Green LED
MECHANICAL
- Dimensions
20.3x12.1x3.49 cm (8 x 4.75 x 1.38 in)
Enclosure
IP 30, Metal
Weight
1.4 lbs – 0.64 kilograms
MTBF
UHR307 - 143330 Hours
UHR207 - 151173 Hours
MTBF Calc. Method
MIL 217F Parts Count Reliability
ENVIRONMENTAL
- Operating Temperature
-40 to 80°C
0 to 40°C when using wall plug power supply
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
APPROVALS/CERTIFICATIONS
- Emissions
FCC Class B, CISPR Class B (EN55022)
CE
EN61000-6-2:2005 (Heavy Industrial)
EN61000-4-2:2008 (ESD) +/- 8kV contact, +/-15 kV air
EN61000-4-3:2006 (RI) 10 V/m, 80-1000 Mhz; 3 V/m 1.3 to 2.7 GHz
EN61000-4-4:2004 (EFT Burst) +/- 2kV DC ports; +/- 1 kV signal ports
EN61000-4-5:2005 (Surge) +/- 2 kV com; +/- 1 kV differential
EN61000-4-6:2008 (CI) 10 Vrms, 0.15 to 80 MHz
EN61000-4-8:2001 (Magnetic) 10 A/m, 50 Hz & 60 Hz
Other
IEC60068-2-27 (Shock) 50G Peak, 11 ms, 3 axes
IEC60068-2-6 (Vibration) 140-500 Hz, 4G, 3 axes
IEC60068-2-32 (Drop) 10 total drops from sides, corner, edges
UL
Class 1 Division 2 Listed File: E24545
Clients qui ont dájà consulté cet article ont également vu