Advantech BB-485OPDRI-PH
RS-485/422 Triple (Heavy Duty) Isolated Repeater, DIN Rail
- IEEE-61850-3, IEEE-1613
- NEMA TS2
- -40 to 85°C Operating Temperature
- Rugged IP30 Metal Panel Mount Case
- 50G Shock, 4G Vibration
- 2kV Triple Isolation
- 10 to 48 VDC Input Power
Model BB-485OPDRI-PH is our premium heavy industrial RS-422/485 isolated repeater. Designed for rugged industrial environments, it has been put through some of the most exacting compliance tests in the industry. Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.
Packaged in a rugged IP30 metal case, it extends full or half-duplex RS- 422/485 signals an additional 4000 feet and allows you to add another 32 nodes to your network. Our bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.
Packaged in a rugged IP30 metal case, it extends full or half-duplex RS- 422/485 signals an additional 4000 feet and allows you to add another 32 nodes to your network. Our bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.
SERIAL TECHNOLOGY
- RS-422
TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 4-Wire
TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 2-Wire
Data A(-), Data B(+)
RS-422/485 CON.
5 Position, Removable Terminal Block
Data Rate
1.2 to 115.2 Kbps
Isolation
2 KV RMS, 1 minute
Surge Protection
600 W Peak Power Dissipation
Clamping time < 1 pico-second
Industrial Bus
MODBUS ASCII / RTU
Bias
Built-in, switchable 1.2KΩ XMT/RCV
Termination
Built-in, switchable 120Ω
POWER
- Source
External
Power Connector
2 Position Removable Terminal Block
Input Voltage
10 to 48 VDC (56 VDC Maximum)
Power Consumption
0.5 W typical (2.3 W with termination)
TERMINAL BLOCKS
- Wire Size Accepted
28 to 12 AWG, Copper wire only.
Pitch
5.08 mm
Insulation Resistance
≥500 MΩ @ 500 VDC
Maximum Torque
5 Kg / cm
Temperature rating of field installed conductors 105°C minimum.
INDICATORS
- Power
Red LED
TD / RD (Each Port)
Green LED
MECHANICAL
- Dimensions
13.24 x 9.29 x 3.30 cm
5.2 x 3.7 x 1.3 in
Enclosure
IP30 Metal, Panel Mount
Weight
0.46 lbs (208.65 grams)
MTBF
122832 Hours
MTBF Calc. Method
Parts Count Reliability Prediction
ENVIRONMENTAL
- Operating Temperature
-40 to 85°C (-40 to 176°F)
Storage Temperature
-40 to 85°C (-40 to 176°F)
Operating Humidity
0 to 95% Non-condensing
REGULATORY
- Approvals
FCC, CE, IEC 61850-3, IEEE 1613, UL C1 D2,
File: E245458, NEMA TS2
IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS
- 61000-4-2
61000-4-3
61000-4-4
61000-4-5
61000-4-6
61000-4-12
61000-4-16
61000-4-17
IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS
- C37.90.3
C37.90.2
C37.90.1
ENVIRONMENTAL SPECIFICATIONS
- 60068-2-1
60068-2-2
60068-2-30
IEC 600068-2-6
IEC 600068-2-27
IEC 60068-2-32
I clienti che hanno visto questo prodotto hanno anche consultato