Advantech BB-232OPDRI-PH
Heavy Industrial RS-232 Isolated Repeater
- IEEE-61850-3, IEEE-1613
- NEMA TS2
- -40 to 85°C Operating Temperature
- Rugged IP30 Metal Panel Mount Case
- 50G Shock, 4G Vibration
- 2kV Triple Isolation
- 10 to 48 VDC Input Power
The 232OPDRI-PH is our premium Heavy Industrial RS-232 Isolated Repeater. Designed for rugged industrial environments, it has been put through some of the most exacting compliance tests in the industry. Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.
Packaged in a rugged IP30 metal case, this repeater operates in wide temperature extremes. The panel mount form factor with DIN Rail mount option makes it easy to integrate into your control panel or other industrial equipment.
Installation and configuration is easy. Data is connected with a DB9 female connector (DCE) and a DB9 male connector (DTE). Power is connected through terminal block that accepts 10 to 48 VDC from any external source.
Packaged in a rugged IP30 metal case, this repeater operates in wide temperature extremes. The panel mount form factor with DIN Rail mount option makes it easy to integrate into your control panel or other industrial equipment.
Installation and configuration is easy. Data is connected with a DB9 female connector (DCE) and a DB9 male connector (DTE). Power is connected through terminal block that accepts 10 to 48 VDC from any external source.
SPECIFICATIONS
SERIAL TECHNOLOGY
- Serial Connector
DB9 F (DCE), DB9 M (DTE)
Data Rate
Up to 115.2 Kbps
Isolation
2 KV RMS, 1 minute
POWER
- Source
External (Not Included)
Power Connector
2 Position Removable Terminal Block
Input Voltage
10 to 48 VDC (56 VDC Maximum)
Power Consumption
0.55 W (typical), 1.5 W (maximum)
TERMINAL BLOCKS
- Wire Size Accepted
28 to 12 AWG
Pitch
5.08 mm
Insulation Resistance
≥500 MΩ @ 500 VDC
Maximum Torque
5 Kg / cm
INDICATORS
- Power
Red LED
Data
Green LED TD, RD, CTS, RTS
MECHANICAL
- Dimensions
13.24 x 9.29 x 3.30 cm
5.2 x 3.7 x 1.3 in
Enclosure
IP30 Metal, Panel Mount
Weight
0.46 lbs (208.65 grams)
MTBF
194712 Hours
MTBF Calc. Method
Parts Count Reliability Prediction
ENVIRONMENTAL
- Operating Temperature
-40 to 85°C (-40 to 176°F)
Storage Temperature
-40 to 85°C (-40 to 176°F)
Operating Humidity
0 to 95% Non-condensing
REGULATORY
- Approvals
FCC, CE, IEC 61850-3, IEEE 1613 UL C1 D2,
File: E245458, NEMA TS2
IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS | ||||
Test | Description | Test Level | Level | |
61000-4-2 | ESD | Enclosure Contact Enclosure Air | 8 kV 15 kV | 4 4 |
61000-4-3 | Radiated RFI | Enclosure Ports | 10 V/m | 3 |
61000-4-4 | Burst (Fast Transient) | Signal Ports DC Power Ports | 4 kV @ 2.5 Khz 4 kV | - 4 |
61000-4-5 | Surge | Signal Ports DC Power Ports | 2 kV line to earth, 1 kV line to line 2 kV line to earth, 1 kV line to line | 4 3 |
61000-4-6 | Induced (Conductive) RFI | Signal Ports DC Power Ports | 10 V RMS 10 V RMS | 3 3 |
61000-4-12 | Damped Oscillatory | Signal Ports DC Power Ports | 2.5 kV common, 1 kV diff mode @ 1MHz 2.5 kV common, 1 kV diff mode @ 1MHz | 3 3 |
61000-4-16 | Mains Frequency Voltage | Signal Ports DC Power Ports | 30 V Continuous, 300 V for 1 s 30 V Continuous, 300 V for 1 s | 4 4 |
61000-4-17 | Ripple on DC Power Supply | DC Power Ports | 10% | 3 |
IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS | ||||
C37.90.3 | ESD | Enclosure Contact Enclosure Air | 8 kV 15 kV | - |
C37.90.2 | Radiated RFI | Enclosure Ports | 10 v/m | - |
C37.90.1 | Fast Transient | Signal Ports DC Power Ports | 4 kV @ 2.5 kHz 4 kV | - |
ENVIRONMENTAL SPECIFICATIONS | ||||
60068-2-1 | Cold Temperature | Test Ad | (-)40 C, 16 Hours | - |
60068-2-2 | Dry Heat | Test Bd | (+)85 C, 16 Hours | - |
60068-2-30 | Humidity (damp heat cycle) | Test Dd | 90% (non-condensing) (+)55C, 6 Cycles | - |
IEC 600068-2-6 | Vibration | Test Fc | 4g | Class 2 |
IEC 600068-2-27 | Shock | Test Ea | 50g | Class 2 |
IEC 60068-2-32 | Drop | - | 6 faces, 1 corner, 3 edges, total 10 drops at 1 m | - |
Clients qui ont dájà consulté cet article ont également vu