Advantech DMU-5010

DMU-5010 is an Ethernet I/O module that supports Modbus TCP protocol and Ethernet daisy chain. DMU-5010 delivers various onboard I/Os including analog input, digital input, and digital output, providing flexible options to satisfy versatile application requirements. With high anti-interference performance, DMU-5010 is suitable for harsh environment applications. You can easily configure the module by the Advantech Domain Focused Configuration Tool.

Specifications


General

Enclosure
SECC

Mounting
DIN-rail,Wallmount

Dimensions (WxHxD)
43 x 125 x 105 mm (1.69" x 4.92" x 4.13")

LAN
10/100Base-T

Connector
1x40 Plug-in screw terminal block (#14~22 AWG)(Power and I/O)
2 x RJ-45(LAN)

Watchdog
System (1.6 second) and Communication (programmable)

Supported Protocols
Modbus/TCP

Power Input
Unregulated10-30V DC w/power reversal protection

Power Consumption
7.2W@ 24V DC


Analog Input

Channels
8

Input Type
mV, V, mA(Ch0-Ch3), mV, V, mA, RTD (Ch4-Ch7)

Input Range
0~5V,0~10V, 0~15V, ±5V, ±10V, ±15V, ±20mA, 0~20mA, 4~20mA

RTD Types & Temp Range
Pt 100 (2-wire and 3-wire):
-50 ~150°C
0 ~ 100°C
0 ~ 200°C
0 ~ 400°C
-200 ~ 200°C
IEC RTD 100 ohms ( =0.0385 )
JIS RTD 100 ohms ( =0.0392 )
Pt-1000(2-wire and 3-wire): -40°C ~160°C

Input Impedance
Voltage: >10MΩ;
Current:120Ω

Accuracy
±0.1%, (voltage); ±0.2% (current); ±0.2°C (RTD) or better

Span Drift
±68 ppm/°C (Voltage)

Zero Drift
±6 μV/°C (Voltage)

Resolution
16-bit

Sampling Rate
10 samples/second

Burn-out Detection
4~20mA and RTD

Protection
50/60 Hz Noise rejection
2,500 V DC Isolation
±30V DC Overvoltage


Digital Input /Output

Channels:
8-ch DI
4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO by Utillity)


Digital Input

Input Level
Dry contact:

Logic level 0 (Off): open
Logic level 1 (On): close to GND

Wet contact:

Logic level 0 (Off): +10V to +30V
Logic level 1(On): +3V max

Note: The Digital Input Level 0 and 1 status can be inverted by utility

Supports 200Hz Frequency/counter input
2 channels max
Counter (32 bit) 200Hz
Frequency 0.1Hz~200Hz


Supports Digital Noise filter

Isolation Protection
2500 V DC


Digital Output

Output
Open Collector to 30V 30mA max load.

Power Dissipation
300mW for each channel

PWM Period
2ms~3600sec

PWM Minimum Duty On
0.2ms

Isolation Protection
2500 V DC


Environment

Storage Humidity
5-95% RH

Operation Temperature
-20 ~ 70°C (-4 ~ 158°F)

Storage Temperature
-30 ~ 80°C (-22 ~ 176°F)



Ordering Information

DMU-5010-AE

8-ch DI. 4-ch DO, 8-ch AI, 4-ch RTD Modbus TCP Module