Advantech APAX-5040PE

APAX-5040PE modules offer 24 digital input channels. Their input channels can accept 2-wiring inputs from a DC voltage source, to determine the state of limits, standard switches or proximity switches. This module is an IEC-61850-3 compliant I/O modules, and suitable for power and energy related application.

Certification

Dielectric Strength and Impulse Tests:
CE, FCC class A

EMC Immunity:
IEC 60255-5:2000

Electronic Discharge:
IEC 61000-4-2:2001,level3

Radiated RF Immunity:
IEC 61000-4-3:2002, 10 V/m, IEEE C37.90.2-1995, 35 V/m

Fast Transient, Burst Immunity:
IEC 61000-4-4:1995 + A1:2001, 4kV @ 2.5KHz

Surge Immunity:
IEC 61000-4-5:2001, 2kV line to line, 4kV line to earth

Conducted RF Immunity:
IEC 61000-4-6:2004, 10 Vrms

Magnetic Field Immunity:
IEC 61000-4-8:2001, 1000 A/m for 3 seconds, 100 A/m for 1 minute

DOMF:
IEC 61000-4-10:2001, 30 A/m @ 100KHz and1 MHz


EMC Emissions

Conducted Emissions:
EN 55022:2002, Class A

Radiated Emissions:
EN 55022:2002, Class A

Dimensions (W x H x D)
30 x 139 x 100 mm

Enclosure
ABS+PC

Weight
160 g

Power Consumption
2 W @ 24 V DC (Typical)

Status Display
LED per channel; On: Logic
level 1; Off: Logic level 0


Digital Input

Channels
24

Points per Common
12

Type
Sink or Source Load

Input Voltage
Rated Value: 24 V DC
For "0" signal: - 5 ~ 5 V DC
For "1" signal: 15 ~ 30 V DC and -15 ~ -30 V DC

Input Impedance
10 kΩ

Input Delay
From logic level 0 to 1: 0.2 ms;
From logic level 1 to 0: 0.2 ms

Operating Frequency
3 kHz

Input Filter
3 ms


Protection

2,500 V DC Isolation Between Channels and Backplane

Over Voltage Protection


Environment

Operating Temperature
-20 ~ 70°C (-4 ~ 158°F)

Storage Temperature
-40 ~ 85°C

Relative Humidity
5 ~ 95% (non-condensing)


Ordering Information

APAX-5040PE

IEC 61850-3 Compliant 24-ch Digital Input Module