AKCP PIR Hardware Motion Detector (MD00)
A Passive Infrared Motion Detector for your security needs
- Wall/ceiling mounted design
- 60º detection angle
- High RFI immunity
- Powered by base unit, no additional power required
- Up to 10 Motion Detector Sensors on a single port
The AKCess Pro PIR Hardware Motion Detector is the perfect accompaniment as part of your security monitoring system. Its unique design allows mounting in either ceiling or walls and characterizes the optimum detection angle to prevent false alarms.
Although compatible with both sensorProbe and securityProbe product series, it is ideally suited to the securityProbe product line. When combined with the securityProbe 5E?s notifications, cameras and security sensor it provides a complete network enabled security monitoring system.
When motion is detected notifications can be sent from the securityProbe 5E via SMS, E-mail or MMS (amongst others) and even have pictures from installed cameras attached to give instant visual feedback as to the developing situation.
Its unique design makes it possible to be mounted on a wall or ceiling. It is available in a small easy-to-install package. To prevent false alarms, this motion detector characterizes the optimum detection angle.
It is also compatible with any AKCP sensorProbe and securityProbe, or securityProbe 5E. To add versatility, up to 10 motion detectors can be linked together and plugged into a single RJ-45 sensor port.
Although compatible with both sensorProbe and securityProbe product series, it is ideally suited to the securityProbe product line. When combined with the securityProbe 5E?s notifications, cameras and security sensor it provides a complete network enabled security monitoring system.
When motion is detected notifications can be sent from the securityProbe 5E via SMS, E-mail or MMS (amongst others) and even have pictures from installed cameras attached to give instant visual feedback as to the developing situation.
Its unique design makes it possible to be mounted on a wall or ceiling. It is available in a small easy-to-install package. To prevent false alarms, this motion detector characterizes the optimum detection angle.
It is also compatible with any AKCP sensorProbe and securityProbe, or securityProbe 5E. To add versatility, up to 10 motion detectors can be linked together and plugged into a single RJ-45 sensor port.
Specifications
Product Code:
MD00
Ordering Information
- Measurement Range
Alarm or Normal
Sensor Type
Infrared sensor dual element
High sensitivity
Detection angle
60°
Maximum working distance is 3 m (9 Ft)
High RFI immunity
Daisy Chainable
Up to 10 Motion Detector Sensors on a single port
Operating Temperature
-20 °C~50 °C
4 °F~122 °F
Interface
- Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length
With approved low capacitance shielded cable or UTP
Maximum cable length of single motion detector sensor is 300 m (100 Ft)
Maximum total cable length of a string of 10 motion sensors is 46 m (150 Ft)
Maximum length of cable between each motion sensor should less than 6 m (20 Ft)
Power Source
Powered by the controller unit. No additional power needed
Full autosense including disconnect alarm
Power Consumption
Typical 50 mWatt, 10mA
Dimensions
65(W) x 62(H) x 15(D) mm
Mounting
Wall/ceiling mounted design
DIN rail mounting
Screw mounting
Sensor count
1
Product Code:
MD00
Ordering Information
Product Model | Order Number | Description |
---|---|---|
PIR Hardware Motion Detector | ||
MD00 | 949013 | 5ft cable Siren & Strobe |
MD15 | 5ft PIR Hardware Motion Detector | |
MD40 | 40ft PIR Hardware Motion Detector | |
MD60 | 60ft PIR Hardware Motion Detector | |
MD100 | 100ft PIR Hardware Motion Detector |
Kunden, die diesen Artikel gesehen haben, sahen auch