AKCP Security Sensor (SSXX)

The Security sensor is a magnetic on/off switch for monitoring doors and windows. When the door, or window, opens the input signal is detected by the sensorProbe or securityProbe base unit. Alerts can then be generate to notify you even including images captured from an attached camera to give you instant visual feedback on the situation.

They are active switches that close when one half of the sensor is in close proximity to its mate. When the two sensor pairs are moved apart from each other they open. The base unit senses closure and opening of these switches.

Specifications

Measurement Range
Alarm or Normal

Sensor Type
Open / Closed magnetic switch

Input Measurement Rate
Multiple readings every second

Normal input state is settable under software

Features
Unlimited number can be wired in series using one Port
No reasonable limitation on distance from base unit



Interface


Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire

Communications Cable Max. length
1000 Ft (305m) with approved low capacitance shielded cable or UTP

Power Source
Powered by the sensorProbe2 or sensorProbe2+. No additional power needed
Full autosense including disconnect alarm

Power Consumption
Typical 8.95 mWatt, 1.79mA

Sensor count
1



Measurement Rate


• Multiple readings every second
• Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP
• sensorProbe auto detects the presence of the security sensor
• Up to 2 security sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
• Full autosense including disconnect alarm

Product Code:
SSXX



Ordering Information

Product Model	Order Number	Description
Security Sensor
SS15	949007	15ft Security Sensor
SS60	940149	60ft Security Sensor
SS100		100ft Security Sensor