AKCP Airflow Sensorr ( AFSxx)

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Environmental Sensors > AKCP Airflow Sensorr ( AFSxx)

AKCP Airflow Sensorr ( AFSxx)

This device is meant to measure the presence or the absence of air flow.

AKCP Airflow Sensorr ( AFSxx)
3988_33254.png
3988_33255.jpg
3988_33256.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • On/off alarm signal of airflow
  • Accurate, cost effective flow sensing
  • Operates from a single +5 V DC Power Supply which powered by the sensorProbe
  • 2 LEDs indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe
  • Electronics mounted in a small plastic case
  • Sensor type ? open/closed contact switch
  • sensorProbe auto detects the presence of the airflow sensor
  • Up to 2 airflow sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  • Full autosense including disconnect alarm
  • Data graphically displayed via a web page
  • AFS00 can be extended to your desired cable length using one of our CAT5 extension cables, CABXX, or you can provide your own cable of any length up to 60 feet
The AKCess Pro airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized if this cooling airflow stops.

The Airflow sensor is placed in the path of the air stream, where the user can monitor the status of the flowing air. The airflow sensor is not a precision measuring instrument. This device is meant to measure the presence or the absence of air flow.

In addition to the sensors ON or OFF status, the airflow sensors condition can also be read via an SNMP get using its OID. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.

This is not a precision sensor, it is ONLY designed to sense the presence and non-presence of airflow and not to measure the amount of airfow. It is best used to send an alert in the case of a fan, AC failure or when airflow is present when it should not be.

ProdGrafik

Specifications

      Measurement Range
      Normal or Critical

      Sensor Type
      Thermistor / On or Off

      Measurement Rate
      Multiple readings every second

      Indication
      LED for Status
      LED for connectivity

      Operating Temperature
      -20 °C~60 °C
      4 °F~140 °F



    Interface

      Communications Cable
      RJ-45 jack to sensor using UTP Cat 5 wire

      Communications Cable Max. length
      The AirFlow Sensor can be extended from the RJ-45 Intelligent Sensor ports
      on the base units up to 60 feet, or 18 meters using standard CAT5/6 LAN cable

      Power Source
      Powered by the controller unit. No additional power needed
      Full autosense including disconnect alarm

      Power Consumption
      Typical 430 mWatt, 85mA

      Dimensions
      56 x 55 x 33.3 mm

      Mounting
      DIN rail mounting
      Screw mounting

      Sensor count
      1





Ordering Information


     Product Model           Order Number      Descrition
Airflow Sensor
AFS00 949009 5ft cable Airflow Sensor
AFS15   15ft cable Airflow Sensor
AFS40   40ft cable Airflow Sensor
AFS60   60ft cable Airflow Sensor     

Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.