AKCP THS00 Dual Temperature Humidity Sensor
Single Port Temperature and Humidity Sensor - Dual sensor, 2 sensors on one port
Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
The AKCP single port dual Temperature & Humidity Sensors has both temperature and humidity measuring capabilities in a single sensor. This extends the capability of the sensorProbe to measure up to 8 temperature and 8 humidity sensing parameters, just by connecting 8 dual sensor.
Up to 2 dual sensors can be plugged into the RJ-45 jacks on the sensorProbe2 and up to 8 sensors on the sensorProbe8, sensorProbe8-X20/X60.
You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module. Specially designed CAT 5 cable assures a correct reading up to 100 feet, and is available in standard length of 1 foot, 15 feet, 60 feet and 100 feet, allowing the sensors to be positioned in hot spots. These dual sensors can be extended beyond their standard length.
In some cases they can be extended up to1,000 feet (only the THS00 remote type should be extended).
When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time.
Each Temperature Humidity Sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG. The Temperature Humidity Sensor can be read using included SNMP utilities to allow graphing and data logging at 0.2°C resolution. We also sell a Water resistant version of our Temperature Humidity Sensor .
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
- Monitors temperature and humidity on a single intelligent sensor port
- Own SNMP OID for data collection via a network
- Temperature measurement from -40ºC – +75ºC
- Relative Humidity measurement from 0% – 100%
- Powered by base unit, no additional power needed
- Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the
- sensors presence and configures it for you.
The AKCP single port dual Temperature & Humidity Sensors has both temperature and humidity measuring capabilities in a single sensor. This extends the capability of the sensorProbe to measure up to 8 temperature and 8 humidity sensing parameters, just by connecting 8 dual sensor.
Up to 2 dual sensors can be plugged into the RJ-45 jacks on the sensorProbe2 and up to 8 sensors on the sensorProbe8, sensorProbe8-X20/X60.
You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module. Specially designed CAT 5 cable assures a correct reading up to 100 feet, and is available in standard length of 1 foot, 15 feet, 60 feet and 100 feet, allowing the sensors to be positioned in hot spots. These dual sensors can be extended beyond their standard length.
In some cases they can be extended up to1,000 feet (only the THS00 remote type should be extended).
When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time.
Each Temperature Humidity Sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG. The Temperature Humidity Sensor can be read using included SNMP utilities to allow graphing and data logging at 0.2°C resolution. We also sell a Water resistant version of our Temperature Humidity Sensor .
- Specifications
Temperature
Measurement Range Celsius : -40°C to +75°C
Measurement Resolution Celsius : 1°C
Measurement Accuracy Celsius : Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit : -40°F to +167°F
Measurement Resolution Fahrenheit : 1°F increments
Measurement Accuracy Fahrenheit : Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF
Humidity
Measurement range : 0 to 100% Relative humidity
Resolution : 1%
Accuracy at : 25°C ±3%
Communications cable : UTP Cat 5 cable
Power source : Powered by the sensorProbe. No additional power needed
Power Consumption :
Typical 7.25 mWatt, 1.45mA
Sensor element wettable without damage
sensorProbe auto detects the presence of the dual sensor
Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
Important Note: The fixed one foot type or TMP01 and THS01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 or THS00 (remote type).We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.
Clients qui ont dájà consulté cet article ont également vu