DIGI XBee ZB Adapters

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Wireless > DIGI XBee ZB Adapters

DIGI XBee ZB Adapters

ZigBee Adapters for Serial and USB Devices

DIGI XBee ZB Adapters
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Supports the ZigBee PRO feature set
  • ZigBee® wireless connectivity for RS232, 485, and USB devices
  • Compatible with XBee gateways and modules
  • Outdoor RF line-of-sight range up to 1 mile with XBee-PRO®
ZigBee technology enables low-cost, low-power networking of sensors, controllers and other such devices in self-configuring, self-healing wireless mesh networks. Digi´s XBee adapters are used to retrofit existing devices for ZigBee connectivity. Available with multiple interface options, these adapters deliver the benefits of ZigBee mesh networking off-the-shelf, without the development time required when using an embedded solution
XBee-PRO ZB USB adapter, internal wire antenna (International) XA-Z14-CE1P-W
XBee-PRO RS-232 adapter, external RPSMA antenna included (9 - 30V) (International) XA-Z14-CS2PH-W
XBee-PRO RS-485 adapter, external RPSMA antenna included (9 - 30V) (International) XA-Z14-CS3PH-W
XBee-PRO DIO adapter, external RPSMA antenna included (9 - 30V) (International) XA-Z14-CS4PH-W
XBee-PRO AIO adapter, external RPSMA antenna included (9 - 30V) (International) XA-Z14-CS5PH-W




    Performance

    RF Data Rate
    250 kbps
      XBee ZB XBee-PRO ZB
    Indoor/Urban Range Up to 133 ft (40 m) Up to 300 ft (90 m) / 200 ft (60 m) Int’l variant
    Outdoor/RF Line-of-Sight Range Up to 400 ft (120 m) Up to 2 miles (3200 m) / 5000 ft (1500 m) Int’l variant
    Transmit Power 1.25 mW (+1 dBm) / 2 mW (+3 dBm) boost mode 63 mW (+18 dBm) Int’l version
    Receiver Sensitivity (1% PER) -96 dBm in boost mode -102 dBm


    Features

    Antenna Type
    XBee ZB Adapters: Internal Antenna; XBee-PRO ZB Adapters: External RPSMA Antenna
    Frequency Band
    2.4 GHz
    Serial Data Interface
    RS-232 DB9M/DTE or RS-485 (6-position wire terminal block) switch selectable between RS-422 half-duplex, RS-422 full duplex and RS-485
    USB Data Interface
    USB 2.0 Full Speed (with ESD protection); connects to host via captive 1-meter cable
    Analog IO (AIO) & Digital IO (DIO)
    6-position wire terminal block; Analog IO: 0 - 10V, 4 - 20 mA, or +/- 2VDC Differential; Digital IO: Digital Input or sinking driver output

    Networking & Security

    Network Topologies
    Point-to-point, Point-to-multipoint, Mesh
      XBee ZB XBee-PRO ZB
    Number of Channels 16 14

    Spread Spectrum Type
    Direct Sequence Spread Spectrum
    Filtration Options
    PAN ID, 64-bit MAC, channel
    Addressing
    65,000 available addresses for each channel

    Other

    LEDs
    Power: Glows green when external power is supplied (not active when battery powered to limit power drain) Associate: Blinks when unit is connected and associated on an RF network
    Controls
    Device reset (internal push button); Identification (internal push button) – relays ID to gateway
    Dimensions (L x W x H) & Weight
    RS-232, RS-485, AIO, DIO models: 3.60 in x 1.90 in x 1.20 in (9.14 cm x 4.82 cm x 3.04 cm) 2.29 oz (64.92 g) USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm) 1.60 oz (45.36 g)
    Operating Temperature
    -40° C to +70° C

    Power Requirements

    Input Voltage
    RS-232, RS-485, AIO, DIO models: 3.7-6VDC and 9-30 VDC
    USB models:
    Bus powered (+5V)
      XBee ZB XBee-PRO ZB
    Power Consumption USB: 70 mA (normal operation) / 200 uA (suspend mode) USB: 70 mA Rx and 250 mA Tx (normal operation) / 200 uA (suspend mode)


    Regulatory Approvals

    Emissions
    FCC Part 15.247, IC, ETSI/CE, Telec, EN55022 (Class B)
    Safety
    UL60950, CAN/CSA C22.2 No.60950
    RoHS
    Yes
Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.