DIGI PortServer TS M MEI

The PortServer TS 1/3 + Modem allows users to create connections from serial devices to Ethernet networks and over standard phone lines. It combines the inherent benefits of data networking with proven asynchronous connectivity to deliver powerful yet simple Ethernet connectivity for any serial device.

The PortServer TS 1/3 + Modem is ideal for facilities that need local serial-to-Ethernet connectivity, with the added ability to establish a PPP link using a dial-up connection. The modem extends TCP/IP communications over a standard phone line, which creates a backup connection in case the primary Ethernet connection fails. This remote dial-up functionality allows users from a central location to maintain access to remote serial devices at all times. Other applications include remote site console management for small branches and remote log-in via a TCP/IP network for easy troubleshooting, monitoring, configuration or control.

As with all of Digi’s device server solutions, the PortServer TS 1/3 + Modem delivers universal, high-performance multiport serial-to-Ethernet connectivity and is ideal for applications requiring COM ports, serial tunneling, or where TCP Socket, UDP Socket, or UDP Multicast functionality is needed. Patented RealPort technology makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing software applications to work with networked device servers instead of requiring a host adapter.

Management
HTTP/HTTPS, CLI, SNMP (read/write),
Digi Port Authority-Remote management diagnostics and auto-discovery tool

Protocols
UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support

Software
Supports Digi’s Realport® COM port redirector

Security
SSHv2, Static routing, RIP 1

Status LEDs
Link, Power

Operating Systems
AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent

Dimensions (L x W x D)
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm) Weight 2.25 oz (64.00 g)

Other
DIN rail mounting options, Full modem and hardware flow control, Port buffering, RJ45-DB-9F console adapter included for optional serial configuration

Ports
3 RS-232/422/485 RJ-45; Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD

Ports
1 RJ-11

Modem Type
Internal v.90/v.92

Ports
1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex

Power Input
9-30 VDC

Power Supply (included)
North America: 12 VDC/.5A max out; 120VAC in (wall mount)
International: 12 VDC/.5A max out; 100-240VAC in (small brick)

Power Consumption
Typical: 4 W; Max: 6 W

Product Surge Protection (ESD)
4 kV burst (EFT) per EN61000-4-4, 2 kV surge transient per EN61000-4-5

Operating Temperature
-0° C to +50° C (32° F to 122° F)

Relative Humidity
5% to 90% (non-condensing)

Ethernet Isolation
1500 VAC min per IEEE802.3/ANSI X3.263

Serial Port Protection (ESD)
15 kV human body model

Safety
UL60950, CAN/CSA C22.2 No. 60950, EN60950

Emissions/Immunity
CE; FCC Part 15 (Subpart B, Class B); EN55022 Class B; EN61000-3-2, 3; EN55024

• DIGI PortServer TS M MEI Datasheet (321.5 kB)