The Annuncicom 200 is a versatile Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers, Aiphone stations or amplifers. Supporting both music (MP3) as well as voice codecs (G.711, uLaw, aLaw) and a large number of protocols (including shoutcast, SIP etc), the device can be used for both background music as well as VoIP applications.
Key Features IP Paging and Intercom device with mic/speaker and line level interfaces. 2W output power into 8 Ohm and contact closure inputs, relay output. Useable as paging gateway, small zone device, Intercom device
Designed in Switzerland and being used in thousands of mission critical paging and intercom applications, the Barix Annuncicom series is the product of choice for IP based Paging, Intercom and VoIP applications worldwide.
VHF Radio Controller and interface to IP
Microphone Encoder for IP Audio Surveillance
Door Intercom Controller, VoIP based
Help Point/SOS call box device
Classroom VoIP device with built-in amplifier, talkback, serial port
Paging and Audio Distribution with Amplifier control and monitoring
Live IP Audio Encoder for Streaming Applications
Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
SIP and IP Paging Zone Device
Digital Annunciator, Message Player, Message Repeater
SIP RAVA application has been developed to allow Barix Annuncicom 200 device to operate with Crestron RAVA PTT Touch Panels for door intercom applications. While the device is operated in full duplex mode, it is recommended to use the Crestron RAVA panels in Halfduplex Push-to-talk to avoid feedback. The Fimware is provided as binary image to be loaded direct onto the device using the usual WEB update function.
16 to 30 VDC, 16 to 24 VAC, 12 Watt max. on screw terminal block and 2.1mm barrel connector
802.3af PoE 48 VDC, 12 Watt max. on RJ-45 connector and on screw terminal block