Digi One IAP Haz

The Digi One® IAP Haz is designed for use in harsh environments where exposure to extreme temperatures and volatile liquids and gases is common, the Digi One IAP Haz provides serial-to-Ethernet connectivity and industrial protocol bridging.

Applications for this product exist across several vertical markets, including power or natural resource distribution and water/wastewater management and diverse manufacturing (food/beverage, printing, pharmaceutical), to connect devices such as PLCs, motors, drives, bar-code readers and displays. Its hardened design and Class 1, Division 2 certification ensure reliable performance in extreme conditions, reducing operating risk and the costs associated with application failure.

The Digi One IAP Haz is a device server and a protocol bridge rolled into one. Applications may communicate with virtually any device with a serial port via TCP, UDP or Digi’s patented RealPort® COM port redirector for remote native COM port access. Its protocol conversion capability enables the Digi One IAP Haz to actually bridge multiple industrial devices, whether serial, Ethernet or both, as long as they speak any of the supported serial (DF1, Modbus, ASCII) or Ethernet (Modbus/TCP, A-B/Ethernet, EtherNet/IP) protocols.

Specifications


Features

Management
HTTP configuration, Digi Port Authority–Remote management diagnostics and auto-discovery tool, SNMP (read/write)

Protocols
Telnet, Reverse Telnet, RFC2217, TCP/UDP Socket Services, PPP, DHCP/RARP, ARP-Ping, Static IP for IP address assignment, Support for 64 concurrent socket connections, ASCII, DF1, Modbus RTU/ASCII, Modbus/TCP, EtherNet/IP, Allen-Bradley Ethernet

Software
Patented RealPort COM port redirector for COM/TTY ports for Microsoft® Windows®, UNIX® and Linux®

Security
SSHv2, SSL, TLS, HTTPS

Operating Systems
AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent.

Status LEDs
Serial signals, Power, Ethernet and diagnostics

Dimensions (L x W x D)
4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm)

Weight
2.5 oz (64.0 g)

Other
Digi One IAP

Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting

Digi One IAP Haz

Conformal coated PCB, Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting

Interfaces

Serial Ports
1 RS-232/422/485 (switch selectable)

Serial Connector
Screw terminal connector or DB-9M; DB-9M can act as a second direct RS-232 port or can be used as a pass-through port for the screw terminal connector

Serial Throughput
Up to 230 Kbps

Ethernet Physical Layer
10/100Base-T

Power Requirements

Power Input
9-30 VDC @ 0.5Amps max

Power Supply
Removable screw terminal for power (power supply not included)

Powered Ethernet
Digi One IAP
802.3af (midspan and endspan) support and fail-over capability when used with 9-30 VDC input

Digi One IAP Haz
N/A

Product Surge Protection (ESD)
2 kV isolation between power supply and serial ground product when used with Digi power supply

Environmental

Operating Temperature
Digi One IAP
0° C to +60° C (32° F to +140° F)

Digi One IAP Haz
-35° C to +74° C (-31° F to +165° F)

Relative Humidity
5% to 90% (non-condensing)

Ethernet Isolation
1500 VAC min per IEEE 802.3/ANSI X3.263

Serial Port Protection (ESD)
15 kV human body model

Regulatory Approvals

Safety
UL 1950, UL 1604 (Class 1, Div. 2), CSA 22.2 No 950, EN60950

Emissions/Immunity
FCC Part 15 (Class A), ICES-003 (Class A), CE, AS3548, EN6100-6-2 + EN55024, EN55022 (Class A)

Ordering
70001777	Digi One IAP
70002326	Digi One IAP Haz