DIGI PortServer TS Haz MEI
PortServer TS Haz MEI
- Conformal coated circuit board
- Ships in "Latency Mode & TCP Keepalive" setting
- 10/100Base-T Ethernet support
- RJ-45 serial port(s)
- RS-232/422/485 switch selectable
- Baud rates up to 230 Kbps
- Full modem and hardware flow control
- Low latency
- TCP/UDP Socket Services
- Telnet and Reverse Telnet
- Patented RealPort technology for COM and TTY ports
- PPP
- SSHv2 server
- SSL/TLS
- Port buffering
- Modbus serial to Modbus/TCP conversion
- HTTP
- SNMP (read/write)
- Digi Port Authority - Remote management diagnostics and auto-discovery tool
- DHCP/RARP/ARP-Ping for IP address assignment
- LED status for link and power
- RJ-45/DB-9F crossover cable included for configuration
- Screw terminal connector for power
The PortServer® TS Haz MEI is designed for serial-to-Ethernet connectivity in hazardous locations Robust, hardened model with extended temperature tolerance (-35° C to 74° C) Class 1, Division 2 certified
Conformal coated circuit board 1, 2 or 4 RS-232/422/485 serial ports The PortServer TS Haz MEI makes it easy to connect one to four serial devices to your network, even in applications where environmental hazards demand extended safety features and operating tolerances. With a conformal coated circuit board, extended temperature tolerance and the ability to safely perform in flammable environments (Class 1, Division 2 certified), it is the ideal device connectivity solution for applications in factory automation and utility management (gas, electric and water).
Like the rest of Digi´s broad serial server offering, the PortServer TS Haz MEI is built for applications requiring COM ports, serial tunneling, TCP or UDP Sockets, or the ability to send UDP packets to multiple destinations. RealPort® technology makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing software applications to work seamlessly over the device server and communicate with the target device.
Conformal coated circuit board 1, 2 or 4 RS-232/422/485 serial ports The PortServer TS Haz MEI makes it easy to connect one to four serial devices to your network, even in applications where environmental hazards demand extended safety features and operating tolerances. With a conformal coated circuit board, extended temperature tolerance and the ability to safely perform in flammable environments (Class 1, Division 2 certified), it is the ideal device connectivity solution for applications in factory automation and utility management (gas, electric and water).
Like the rest of Digi´s broad serial server offering, the PortServer TS Haz MEI is built for applications requiring COM ports, serial tunneling, TCP or UDP Sockets, or the ability to send UDP packets to multiple destinations. RealPort® technology makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing software applications to work seamlessly over the device server and communicate with the target device.
Specifications
Features
- Management
HTTP/HTTPS, PPP, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
Protocols
PortServer TS H MEI
- UDP/TCP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
PortServer TS Hcc MEI
- UDP/TCP, Supports multiple unicasts, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
PortServer TS Haz MEI
- UDP/TCP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Software
Supports Digi’s Realport® COM port redirector
Security
SSHv2, SSL/TLS
Extended Safety
PortServer TS H MEI
- N/A
PortServer TS Hcc MEI
- Conformal coated circuit board, NEMA TS 2 compliant, Screw terminal connector for power
PortServer TS Haz MEI
- Conformal coated circuit board, Screw terminal connector for power, Ships in "Latency Mode & TCP Keepalive" setting
Status LEDs
Link, Power, Activity, Status
Operating Systems
AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent
Dimensions (L x W x D)
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm)
Weight
2.25 oz (64.00 g)
Other
PortServer TS H MEI
PortServer TS Hcc MEI
- Full modem and hardware flow control, Modem emulation, Port buffering, RJ45-DB-9F console adapter included for optional serial configuration, Wall mount kit included
PortServer TS Haz MEI
- Full modem and hardware flow control, Modem emulation, Port buffering, RJ-45/DB-9F crossover adapter included for optional serial configuration
Interfaces
Serial
- Ports
PortServer TS H MEI
PortServer TS Hcc MEI
- 1/2/4 RS-232/422/485 RJ-45 (switch-selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
PortServer TS Haz MEI
- 4 RS-232/422/485 RJ-45 (switch-selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ethernet
- Physical Layer
1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Power Requirements
- Power Input
PortServer TS H MEI
- 9-30 VDC
PortServer TS Hcc MEI
- 9-30 VDC @ 0.5 Amps max (screw terminal power)
PortServer TS Haz MEI
- 9-30 VDC @ 0.5 Amps max (screw terminal power)
Power Supply
PortServer TS H MEI
- 12 VDC extended temperature power supply sold separately; Bare-wire “pigtail” power connector included
PortServer TS Hcc MEI
- 9-30 VDC @ 525 mA max
PortServer TS Haz MEI
- Optional 12 VDC extended temperature power supply sold separately
Power Consumption
Typical: 4 W; Max: 6 W
Surge Protection
4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5
Environmental
- Operating Temperature
-35° C to +74° C (-31° F to 165° F)
Storage Temperature
-40° C to +85° C (-40° F to +185° F)
Relative Humidity
5% to 95% (non-condensing)
Ethernet Isolation
1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD)
15 kV human body model
Approvals
- Safety
UL/CL60950, IEC60950, CB UL/CL60950, IEC60950, CB Class 1 Division 2, UL/CL60950, IEC60950
Emissions/Immunity
CE, FCC Part 15 (Class A), EN55024, EN55022 Class A, AS/NZS 3548, VCCI V-3/99 .05
Ordering Information
Model/Description | Part Numbers |
PortServer TS 4 Haz MEI | 70002320 |
Kunden, die diesen Artikel gesehen haben, sahen auch