DIGI PortServer TS P MEI
Power Series (1/2/4 Ports)
- 10/100Base-T Ethernet support
- RJ-45 serial port connection
- RS-232/422/485 switch selectable
- Baud rates up to 230 Kbps
- Full modem and hardware flow control
- TCP/UDP Socket Services
- UDP Multicast
- Telnet and Reverse Telnet
- Patented RealPort with encryption for COM and TTY ports
- 9-30VDC input
- 802.3af powered Ethernet (mid-span)
- Powered serial (in/out)
- RFC 2217
- Modem emulation
- SNMP (read/write)
- PPP
- SSH v2
- Port buffering
- Low latency
- Modbus to Modbus/TCP conversion
- HTTP
- Digi Port Authority–Remote management diagnostics and auto-discovery tool
- DHCP/RARP/ARP-Ping for IP Address assignment
- LED status for link and power
- RJ-45/DB-9F crossover cable included for optional serial configuration
The PortServer TS P MEI family makes it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like powered Ethernet and powered serial, PortServer TS P MEI can adapt to many applications where traditional power alternatives are required.
Available in one-, two- and four-port versions, PortServer TS P MEI delivers universal, high performance multiport serial-to-Ethernet connectivity. It is ideal for applications requiring COM ports, serial tunneling, or where TCP/UDP Socket functionality is needed. Digi’s patented RealPort with encryption makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing software applications to work with networked device servers instead of requiring a host adapter.
Available in one-, two- and four-port versions, PortServer TS P MEI delivers universal, high performance multiport serial-to-Ethernet connectivity. It is ideal for applications requiring COM ports, serial tunneling, or where TCP/UDP Socket functionality is needed. Digi’s patented RealPort with encryption makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing software applications to work with networked device servers instead of requiring a host adapter.
Features
- Management
HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
Protocols
UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Software
Supports Digi’s Realport® COM port redirector
Security
SSHv2
Status LEDs
Link, Power
Operating Systems
AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012.
Note: TCP/UDP socket services are operating system independent
Dimensions (L x W x D)
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm)
Weight
2.25 oz (64.00 g)
Other
802.3af powered Ethernet (mid- and end-span); Full modem and hardware flow control, Modem emulation, Port buffering, RJ45-DB-9F console adapter included for optional serial configuration
Interfaces
Serial
- Ports
PortServer TS 2 P MEI
- 2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
PortServer TS 4 P MEI
- 4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ethernet
- Ports
1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Power Requirements
- Power Input
9-30 VDC
Power Supply (included)
North America: 12 VDC/.5A max out; 120 VAC in (wall mount);
International: 12 VDC/.5A max out; 100-240 VAC in (small brick)
Power Consumption
Typical: 4 W; Max: 6 W
Product Surge Protection (ESD)
4 kV burst (EFT) per EN61000-4-4, 2 kV surge transient per EN61000-4-5
Powered Ethernet
Ethernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5
Serial Power Input
DC input connector, 9-30 VDC, 525 mA max; Serial Port 1, Pin 1 (RI), 9-30 VDC, 525 mA max
Serial Power Output
Available on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; Pin 9 (DTR) 9 VDC up to 100 mA max
Environmental
- Operating Temperature
0° C to 50° C (32° F to 122° F)
Relative Humidity
5% to 90% (non-condensing)
Ethernet Isolation
1500 VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD)
15 kV human body model
Regulatory Approvals
- Safety
UL 1950, CSA 22.2 No. 950
Emissions/Immunity
CE, FCC Part 15 (Class A), EN55024, EN55022 Class A
ORDERING INFORMATION
PART NUMBERS | DESCRIPTION |
70001992 | PortServer TS 2 P MEI (mid- and end-span PoE) (International) |
70001993 | PortServer TS 4 P MEI (mid- and end-span PoE) (International) |
Kunden, die diesen Artikel gesehen haben, sahen auch