Advantech ADAM-6022

SPHINX en Europe
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Groupes de produits > I/O Modules > Advantech ADAM-6022

Advantech ADAM-6022

Ethernet-based Dual-loop PID Controller

Advantech ADAM-6022
1075_27283.png
1075_27284.png
1075_27285.png
  • Les caractéristiquesLes caractéristiques
  • PrésentationPrésentation
  • Plus d'informationPlus d'information
  • PDFPDF
  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Built-in watchdog timer
The Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.
ProdGrafik
General

Loop Number
2 (3 AI, 1 AO, 1 DI, 1 DO for each control loop)


Analog Input

Channels
6 (differential)

Input Range
±10 V DC, 0 ~ 20 mA, 4 ~ 20 mA


Analog Output

Channels
2

Output Type
V, mA

Output Range
0 ~10 V DC, 4 ~ 20 mA, 0 ~ 20 mA


Digital Input

Channels
2

Dry Contact
Logic level 0: close to GND
Logic level 1: open

Wet Contact
Logic level 0: 0 ~ 3 V DC
Logic level 1: 10 ~ 30 V DC


Digital Output

Channels
2, open collector to 30 V, 100 mA max. load

Power Dissipation
300 mW for each module



COMMON SPECIFICATION


General

LAN
10/100Base-T(X)

Power Consumption
4 W @ 24 V DC

Connectors
1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power)

Watchdog
System (1.6 second) and Communication (programmable)

Power Input
10 ~ 30 V DC

Supports Modbus/TCP, TCP/IP, UDP and HTTP Protocols


Analog Input

Input Impedance
20 M W

Accuracy
±0.1% of FSR

Resolution
16-bit

Sampling Rate
10 sample/second

CMR @ 50/60 Hz
90 dB

NMR @ 50/60 Hz
60 dB

Span Drift
±25 ppm/° C

Zero Drift
±6 ìV/° C


Analog Output

Accuracy
±0.1% of FSR

Resolution
12-bit

Drift
±50 ppm/° C

Current Load Resistor
0 ~ 500 W


Protection

Isolation Protection
2,000 V DC

Built-in TVS/ESD Protection

Over Voltage Protection
±35 V DC

Power Reversal Protection


Environment

Operating Temperature
-10 ~ 50° C (14 ~ 122° F)

Storage Temperature
-20 ~ 80° C (-4 ~ 176° F)

Operating Humidity
20 ~ 95% RH (non-condensing)

Storage Humidity
0 ~ 95% RH (non-condensing)

Ordering Information

Part Number Description
ADAM-6022-AE Ethernet-based Dual-loop PID Controller
Accessory  
ADAM-6520-BE 5-port 10/100 Mbps Industrial Switch
PCLS-ADAMVIEW32 HMI Software for ADAM I/O Products
PWR-242-AE DIN-rail Power Supply
PWR-243-AE Panel Mount Power Supply
PWR-244-AE Panel Mount Power Supply

Clients qui ont dájà consulté cet article ont également vu
Accepter tout Rejeter Configurer

Ce site utilise des cookies pour offrir la meilleure expérience possible. Plus de détails.