Advantech ADAM-4013
Product is End of Life : 2020-10-26
Analog RTD Input Module
- Built-in Watchdog Timer
- Accuracy +/- 0.05% or better
- Isolation Voltage 3000 VDC
- Sampling Rate 10 sample/sec
The Advantech Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC .
Details
Display
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
1 (2, 3, or 4-wired)
Direct Sensor Input
RTD (Pt, or Ni)
Sampling Rates
10 samples/second
Resolution
16-bit
Input Impedance
2 MOhm
Span Drift
±25 ppm/°C
Zero Drift
±3 µV/°C
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
General
Watchdog Timer
System (1.6 second)
Connector
1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Commen Specifications
General
Power Input
Unregulated 10 ~ 30 V DC
Connectors
1 x plug-in terminal block (#14 ~ 22 AWG)
Watchdog Timer
System (1.6 second)
Analog Input
Resolution
16-bit
Sampling Rate
10 sample/second
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
Isolation Voltage
3,000 V DC
Environment
Operating Humidity
5 ~ 95% RH
Operating Temperature
-10 ~ 70°C (14 ~ 158°F)
Storage Temperature
-25 ~ 85°C (-13 ~ 185°F
Ordering Information
Display
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
1 (2, 3, or 4-wired)
Direct Sensor Input
RTD (Pt, or Ni)
Sampling Rates
10 samples/second
Resolution
16-bit
Input Impedance
2 MOhm
Span Drift
±25 ppm/°C
Zero Drift
±3 µV/°C
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
General
Watchdog Timer
System (1.6 second)
Connector
1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Commen Specifications
General
Power Input
Unregulated 10 ~ 30 V DC
Connectors
1 x plug-in terminal block (#14 ~ 22 AWG)
Watchdog Timer
System (1.6 second)
Analog Input
Resolution
16-bit
Sampling Rate
10 sample/second
CMR @ 50/60 Hz
150 dB
NMR @ 50/60 Hz
100 dB
Isolation Voltage
3,000 V DC
Environment
Operating Humidity
5 ~ 95% RH
Operating Temperature
-10 ~ 70°C (14 ~ 158°F)
Storage Temperature
-25 ~ 85°C (-13 ~ 185°F
Ordering Information
Part Number | Description |
ADAM-4520-D2E | RTD Input Module |
Accessory | |
ADAM-4520-D2E | RS-232 to RS-422/485 converter w/ iso. Rev. D2E |
ADAM-4561-AE | 1-port Isolated USB to RS-232/422/485 Converter |
PCLS-ADAMVIEW32 | HMI Software for ADAM I/O Products |
PWR-242-AE | DIN-rail Power Supply |
PWR-243-AE | Panel Mount Power Supply |
PWR-244-AE | Panel Mount Power Supply |
Clients qui ont dájà consulté cet article ont également vu