Advantech BB ER75i v2 Series(Conel)

GPRS/EDGE ER75i v2 router is used to wirelessly connect various equipment and devices via Ethernet interface 10/100 to the Internet or intranet. With a high security level and wide coverage of GPRS/ EDGE technology provided by mobile phone operators, it is mostly used in industrial applications, for remote maintenance and service of machines, or for data transfer from solar or wind power plants. Other benefits and advantages includes high modularity and option to connect various devices via Ethernet 10/100, RS232, RS485, RS422, M-Bus or I/O.

Key features As a standard, this industrial ER75i v2 wireless router is equipped withone Ethernet 10/100, one USB Host port, one binary input/output (I/O) port and one SIM card. To save and backup communication data, a version with 2 SIM cards is available. The wide range of interface options of this wireless router further expands an optional Port1 and Port2 - selected by the customer. For example, Ethernet port 10/100, serial interface ports RS232/RS485/RS422/M-Bus or (I/O - CNT). Port2 may be equipped with serial interfaces RS232/RS485/RS422/M-Bus or (I/O - CNT). The wireless router is supplied either in a plastic or metal casing, based on the requirements of the customer. WiFi models are available (“F” version of router).

Configuration is done via web interface protected by password. The GPRS/EDGE router supports creation of VPN tunnels using chnologies IPsec, OpenVPN and L2TP to ensure safe communication. Web interface provides detail statistics about the wireless router activities, signal strength, detailed log, etc. Router supports functions: DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS and many other functions.
Other diagnostic functions to ensure continuous communication include automatic inspection of PPP connection offering an automatic restart feature - in case of connection losses, or hardware watchdog which monitors the status of the router. With the help of a special start up script window, you may insert Linux scripts for various actions. For some applications the option to create several different configurations for one wireless GPRS/EDGE router, the profiles (maximum of 4), and the option to switch between them (for example via SMS, binary input status, etc.) is essential. Cellular wireless routers may automatically upgrade configuration and firmware from server. This allows mass reconfiguration of many routers in one time.


SELECTED APPLICATIONS

• Transportation and security
• IT and communication
• Self-service terminals
• Energy and power industry
• Metrology, alarm and warning systems

SPECIFICATIONS

FIXED INTERFACES - BASIC VERSION
1× Ethernet	10/100 Mbits, independent or bridged
1× SIM	SIM Card
1× I/O	Binary input/output
1× USB	USB 2.0 Host, Type A
OPTIONAL INTERFACES
1× Optional port (PORT 1)	Ethernet (10/100Mbps), RS232, RS422/485, M-BUS, I/O Input/Output, Ethernet Switch (with PORT 2)
ANTENNA CONNECTORS
1x SMA – 50 Ohm

FIXED INTERFACES - FULL VERSION
1× Ethernet	10/100 Mbits, independent or bridged
2× SIM	SIM Card
1× I/O	Binary input/output
1× USB	USB 2.0 Host, Type A
OPTIONAL INTERFACES
1× Optional port (PORT 1)	Ethernet (10/100Mbps), RS232, RS422/485, M-BUS ,I/O Input/Output, Ethernet Switch (with PORT 2)
1× Optional port (PORT 2)	RS232, RS422/485, M-BUS, WMBUS, WiFi Ethernet Switch (with PORT 1)
ANTENNA CONNECTORS
1x SMA – 50 Ohm

POWER
Source	9 - 36 VDC
Consumption	Idle - 2 W Transmission - 5 W
MECHANICAL
Dimension Plastic version	51 x 87 x 116mm
Dimension Metallic version	42 x 87 x 113mm
Protection	IP30
Weight Plastic version	150 g
Weight Metallic version	280 g
ENVIRONMENTAL
Operating Temperature	-40 to +75°C
Storage Temperature	-40° to +85°C
Humidity	Operating - 0 to 95% relative humidity non condensing Storage - 0 to 95% relative humidity non condensing
WIFI *optional (“F” router versions)
Antenna connector	R-SMA – 50 Ohms
Supported WiFi band	2.4 GHz
Standards	802.11b, 802.11g, 802.11n
2.4 GHz supported channels	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
RX Sensitivity	11b, 11 Mbps: typ. -85 dBm 11g, 54 Mbps: typ. -70 dBm (HT20) 11n, MSC7: typ. -66 dBm (HT40) 11n, MSC7: typ. -62 dBm
TX Output Power	11b, 11 Mbps: min. 18, typ. 19, max. 20 dBm 11g, 54 Mbps: min. 14.5, typ. 16, max. 17.5 dBm 802.11n (HT20): min. 13.5, typ. 15, max. 16.5 dBm 802.11n (HT40): min. 13.5, typ. 15, max. 16.5 dBm
Type of device	Access point, station
PARAMETERS - EDGE module
Frequency bands	EGSM850, EGSM900, GSM1800 and GSM1900
Transmit power	Class 4 (2 W) for EGSM850 Class 4 (2 W) for EGSM900 Class 1 (1 W) for GSM1800 Class 1 (1 W) for GSM1900
32B ARM MICROPROCESSOR
Memory	512 Mb DDR SDRAM 128 Mb FLASH 1 Mb MRAM
I/O PORT (CNT)
Binary input Binary output	Reed contact with trigger level 1.3 up to 1.4 V 100 mA/ max. 30 V
SOFTWARE FEATURES
Linux based, possibility to program your own application
NTP client, NTP Server – time synchronization
SMS communication – AT commands on RS232, Ethernet and I/O
M-RAM memory inside – router statistic ́s saving into memory
NETWORKING
DHCP – automatic IP addressing in LAN network
NAT/PAT – IP address and ports translation between inside/outside network
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
Dial-in – the ability to communicate over dial CSD call
PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN TUNNELING
IPsec, OpenVPN, L2TP – secure encrypted tunnels
CONFIGURATION AND DIAGNOSTIC
HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
GPRS state signalization by LED
On-line info on GSM signal status (level, cell, neighbors)
SMS info – power on, GPRS connection or disconnection
SMS control – on/off GPRS connection, switch SIM, I/O etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
STANDARDS/REGULATION
Telecom and Emission	ETSI EN 301 511 V12.5.1 (2017-03), ETSI EN 300 328 V2.1.1 (2016-11), ETSI EN 300 220-2 V3.1.1 (2017-02)
EMC	ETSI EN 301 489-1 V2.1.1 (2016-11), Draft ETSI EN 301 489-52 V1.1.0 (2016-11), ETSI EN 301 489-17 V3.1.1 (2017-02), ETSIEN 301 489-3 V2.1.1 (2017-03)
Safety	EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011

Ordering Information

Available Modules
BB-ER2B510010	ER75i v2 Industrial GPRS/EDGE router, EMEA, Plastic, No ACC
BB-ER2B510011	ER75i v2 Industrial GPRS/EDGE router, EMEA, Plastic, ACC EU
BB-ER2B510020	ER75i v2 Industrial GPRS/EDGE router, EMEA, Metal, No ACC
BB-ER2B510021	ER75i v2 Industrial GPRS/EDGE router, EMEA, Metal, ACC EU
BB-ER2B511011	ER75i v2B ETH set
BB-ER2B511021	ER75i v2B ETH SL set
BB-ER2B512011	ER75i v2B RS232 set
BB-ER2B512021	ER75i v2B RS232 SL set
BB-ER2B513011	ER75i v2B RS485 set
BB-ER2B513021	ER75i v2B RS485 SL set
BB-ER2B514010	ER75i v2B RS422
BB-ER2B515011	ER75i v2B MBUS set
BB-ER2B515021	ER75i v2B MBUS SL set
BB-ER2B516011	ER75i v2B CNT set
BB-ER2B516021	ER75i v2B CNT SL set
BB-ER2F511021	ER75i v2F ETH SL set