MOXA ioLogik E1261H-T

Der ioLogik E1261W-T von Moxa ist für Ethernet-basierte Zustands-Fernüberwachungssysteme konzipiert. Mit 3 RTD-, 5 AI- und 12 DIO-Kanälen ist die I/O-Kombination der ioLogik E1261W-T die ideale Lösung für die Überwachung von Windenergieanlagen und Umgebungsbedingungen.

Im Gegensatz zu anderen Fern-I/O-Produkten, die passiv arbeiten und Daten abfragen müssen, unterstützt der ioLogik E1261W-T die aktive Kommunikation mit der für Moxa patentierten Software Active OPC Server, um nahtlos eine Verbindung mit SCADA-Systemen in Echtzeit herzustellen.

Dieses auf Ausnahmeberichten (Report by Exception) basierende Prinzip, eine Neuheit in der PC-basierten Überwachung, erfordert weitaus weniger Bandbreite als herkömmliche Polling-Verfahren.

Rugged Ethernet Remote I/O: The ioLogik E1200H Series for Harsh Environments

Industry-Proven Rugged Design

Installation of remote Ethernet I/O in offshore environments is a real challenge. It is critical to find devices properly designed for protected, safe use in these environments. Moxa’s ioLogik E1200H series with IEC 60945 certifications fulfills the need for devices suitable to such demanding industrial applications. Compactly packaged in a metal housing, this rugged hardware keeps operating in temperatures ranging from -40 to 75°C, meeting the stringent demands of IEC 60945 for harsh offshore applications.

Daisy-Chain Topology Reduces Deployment Costs

Thanks to its two embedded Ethernet switch ports, the ioLogik E1200H remote Ethernet I/O allows you to create daisy-chain topologies for easy cabling. In distributed Ethernet data acquisition applications, panels, units, and cabinets are often located at remote sites where space is limited. The daisy-chain capability of the ioLogik E1200H series allows ioLogik E1200H units to connect in series either to each other or to other nearby Ethernet devices, drastically saving on both space and wiring costs.

• LAN
  Ethernet
  • 2 x 10/100 Mbps switch ports, RJ45
  Protection
  • 1.5 kV magnetic isolation
  Protocols
  • Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
  
  
• Power Requirements
  Power Input
  • 24 VDC nominal, 12 to 48 VDC
  
  
• Physical Characteristics
  Wiring
  • I/O cable max. 14 AWG
  Mounting
  • DIN rail (standard), wall (with optional kit)
  
  
• Environmental Limits
  Operating Temperature
  • -40 to 75°C (-40 to 176°F)
  Storage Temperature
  • -40 to 85°C (-40 to 185°F)
  Ambient Relative Humidity
  • 5 to 95% (non-condensing)
  
  
• Standards and Certifications
  EMI
  • EN 61000-3-2; EN 61000-3-3; EN 61000-6-4; FCC Part 15, Subpart B, Class A
  EMS
  • EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
  Shock
  • IEC 60068-2-27
  Freefall
  • IEC 60068-2-32
  Vibration
  • IEC 60068-2-6
  Green Product
  • RoHS, CRoHS, WEEE
  
  
• Serial Communication
  Interface
  • 1 x RS-232/422/485, software selectable (9-pin D-Sub male)
  Serial Line Protection
  • 4/8 kV ESD for all signals
  
  
• Serial Communication Parameters
  Parity
  • None
  Data Bits
  • 8
  Stop Bits
  • 1
  Flow Control
  • None
  Baudrate
  • 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
  Protocol
  • Modbus/RTU
  
  
• Inputs and Outputs
  Analog Inputs
  • 5 channels
  RTD Inputs
  • 3 channels
  Configurable DIOs
  • 12 channels
  Isolation
  • 3K VDC or 2K Vrms
  
  
• Analog Input
  Type
  • Differential input
  Resolution
  • 16 bits
  I/O Mode
  • Voltage/Current
  Input Range
  • 0 to 10 V, 0 to 20 mA, 4 to 20 mA
  Accuracy
  • ±0.1% FSR @ 25°C
  • ±1.0% FSR @ -40 and 75°
  Sampling Rate (all channels)
  • 12 samples/sec
  Input Impedance
  • 10M ohms (minimum)
  Built-in Resistor for Current Input
  • 120 ohms
  
  
• Digital Input
  Sensor Type
  • Wet Contact (NPN or PNP), Dry Contact
  I/O Mode
  • DI or Event Counter (channel 0–3)
  Dry Contact
  • On: short to GND
  • Off: open
  Wet Contact (DI to GND)
  • On: 0 to 3 VDC
  • Off: 10 to 30 VDC
  Common Type
  • 12 points per COM
  Counter Frequency
  • 250 Hz
  Digital Filtering Time Interval
  • Software selectable
  
  
• RTD Inputs
  Input Type
  • PT100 (3-wire): -50 to 150°C, 0 to 100°C, 0 to 200°C, 0 to 400°C, -50 to 200°C
  • PT1000 (3-wire): -50 to 200°C
  Sampling Rate
  • 12 samples/sec (all channels)
  Resolution
  • 0.5°C
  Accuracy
  • ±0.1% FSR @ 25°C
  • ±1.0% FSR @ -40 and 75°C
  Input Impedance
  • 625K ohms
  
  
• Digital Output
  Type
  • Sink
  I/O Mode
  • DO or Pulse Output (channel 0–3)
  Pulse Output Frequency
  • 500 Hz
  Over-voltage Protection
  • 45 VDC
  Over-current Protection
  • 2.6 A (4 channels @ 650 mA)
  Over-temperature Shutdown
  • 175°C (typical), 150°C (min.)
  Output Current Rating
  • 200 mA per channel
  
  
• Power Requirements
  Power Input
  • 24 VDC nominal, 12 to 48 VDC
  Power Consumption
  • 169 mA @ 24
  
  
• Physical Characteristics
  Dimensions
  • 140 x 113 x 36.3 mm (5.51 x 4.45 x 1.43 in)
  Weight
  • 825 g