MOXA AWK-3262A Series

SPHINX in Europe
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • PL
  • ES
  • SE
  • CH
  • UK
Products for Solutions > Access Points > MOXA AWK-3262A Series

MOXA AWK-3262A Series

Industrial IEEE 802.11ax Wi-Fi 6 wireless AP/bridge/client

MOXA AWK-3262A Series
8356_36845.png
8356_36846.jpg
8356_36847.jpg
8356_36848.jpg
8356_36849.jpg
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationsFurther Informations
  • PDFPDF
  • IEEE 802.11ax Wi-Fi 6 AP/bridge/client
  • Concurrent dual-band Wi-Fi with aggregated data rates up to 1.775 Gbps
  • Wi-Fi 6 OFDMA technology enables concurrent communication with multipleclients for high density environment
  • Latest WPA3 encryption for enhanced wireless network security
  • Millisecond-level Client-based Turbo Roaming1
  • Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
  • Universal (UN) models with configurable country or region code for more flexible deployment
  • -40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments

The AWK-3262A Series 3-in-1 industrial wireless AP/bridge/client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ax technology for aggregated data rates of up to 1.775 Gbps. The AWK-3262A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3262A can be powered via PoE to facilitate flexible deployment. The AWK-3262A can operate concurrently on both the 2.4 and 5 GHz bands and is backwards-compatible with existing 802.11a/b/g/n/ac deployments to future-proof your wireless investments.

Advanced 802.11ax Industrial Wireless Solution

  • 802.11a/b/g/n/ac/ax compliant AP/bridge/client for flexible deployment
  • Wi-Fi 6 OFDMA (Orthogonal Frequency-Division Multiple Access) technology enables concurrent communication with multiple clients for improved network efficiency
  • DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure

Advanced Wireless Technology

  • Seamless roaming with client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs (Client Mode)

Industrial Ruggedness

  • Integrated antenna isolation designed to provide protection against external electrical interference
  • -40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environment

Specifications

WLAN Interface
WLAN Standards 2.4 GHz: 802.11ax with 1024 QAM support, 20/40 MHz
5 GHz: 802.11ax with 1024 QAM support, 20/40/80 MHz
Frequency Band for US (20 MHz operating channels) AWK-3262A US Models Only:
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.745 to 5.825 GHz (5 channels)
Frequency Band for UN (20 MHz operating channels) AWK-3262A UN Models Only:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.745 to 5.825 GHz (5 channels)
Available channels change depending on the selected country or region code.
Wireless Security WEP encryption (64-bit and 128-bit)
WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2/WPA3-Personal
Transmission Rate 2.4 GHz:
Up to 573.5 Mbps
5 GHz:
Up to 1,201 Mbps
Transmitter Power for 802.11a (Dual Chain) 27±1.5 dBm @ 6 Mbps
24.5±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (5 GHz, Dual Chain) 26±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS7 20 MHz
26±1.5 dBm @ MCS0 40 MHz
22±1.5 dBm @ MCS7 40 MHz
Transmitter Power for 802.11ac (Dual Chain) 26±1.5 dBm @ MCS0 20 MHz
22±1.5 dBm @ MCS8 20 MHz
25±1.5 dBm @ MCS0 40 MHz
21±1.5 dBm @ MCS9 40 MHz
25±1.5 dBm @ MCS0 80 MHz
21±1.5 dBm @ MCS9 80 MHz
Transmitter Power for 802.11ax (Dual Chain) 25±1.5 dBm @ MCS0 20 MHz
20±1.5 dBm @ MCS11 20 MHz
25±1.5 dBm @ MCS0 40 MHz
20±1.5 dBm @ MCS11 40 MHz
25±1.5 dBm @ MCS0 80 MHz
20±1.5 dBm @ MCS11 80 MHz
Transmitter Power for 802.11b (Dual Chain) 29±1.5 dBm @ 1 Mbps
29±1.5 dBm @ 11 Mbps
Transmitter Power for 802.11g (Dual Chain) 27±1.5 dBm @ 6 Mbps
26±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (2.4 GHz, Dual Chain) 26±1.5 dBm @ MCS0 20 MHz
24±1.5 dBm @ MCS7 20 MHz
26±1.5 dBm @ MCS0 40 MHz
24±1.5 dBm @ MCS7 40 MHz
Transmitter Power for 802.11ac (2.4 GHz, Dual Chain) 26±1.5 dBm @ MCS0 20 MHz
24±1.5 dBm @ MCS8 20 MHz
26±1.5 dBm @ MCS0 40 MHz
23±1.5 dBm @ MCS9 40 MHz
Transmitter Power for 802.11ax (2.4 GHz, Dual Chain) 26±1.5 dBm @ MCS0 20 MHz
21±1.5 dBm @ MCS11 20 MHz
26±1.5 dBm @ MCS0 40 MHz
21±1.5 dBm @ MCS11 40 MHz
Receiver Sensitivity for 802.11a Typ. -90 dBm @ 6 Mbps
Typ. -72 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (5 GHz) Typ. -89 dBm @ MCS0 20 MHz
Typ. -69 dBm @ MCS7 20 MHz
Typ. -86 dBm @ MCS0 40 MHz
Typ. -66 dBm @ MCS7 40 MHz
Receiver Sensitivity for 802.11ac (5 GHz) Typ. -89 dBm @ MCS0 20 MHz
Typ. -66 dBm @ MCS8 20 MHz
Typ. -86 dBm @ MCS0 40 MHz
Typ. -62 dBm @ MCS9 40 MHz
Typ. -83 dBm @ MCS0 80 MHz
Typ. -58 dBm @ MCS9 80 MHz
Receiver Sensitivity for 802.11ax (5 GHz) Typ. -90 dBm @ MCS0 20 MHz
Typ. -59 dBm @ MCS11 20 MHz
Typ. -87 dBm @ MCS0 40 MHz
Typ. -56 dBm @ MCS11 40 MHz
Typ. -84 dBm @ MCS0 80 MHz
Typ. -53 dBm @ MCS11 80 MHz
Receiver Sensitivity for 802.11b Typ. -96 dBm @ 1 Mbps
Typ. -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g Typ. -91 dBm @ 6 Mbps
Typ. -75 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz) Typ. -91 dBm @ MCS0 20 MHz
Typ. -72 dBm @ MCS7 20 MHz
Typ. -88 dBm @ MCS0 40 MHz
Typ. -69 dBm @ MCS7 40 MHz
Receiver Sensitivity for 802.11ac (2.4 GHz) Typ. -91 dBm @ MCS0 20 MHz
Typ. -68 dBm @ MCS8 20 MHz
Typ. -88 dBm @ MCS0 40 MHz
Typ. -64 dBm @ MCS9 40 MHz
Receiver Sensitivity for 802.11ax (2.4 GHz) Typ. -91 dBm @ MCS0 20 MHz
Typ. -59 dBm @ MCS11 20 MHz
Typ. -88 dBm @ MCS0 40 MHz
Typ. -56 dBm @ MCS11 40 MHz
WLAN Operation Mode Access point
Client
Client-Router
Master
Slave
Sniffer
Antenna External, 2/2 dBi
Omni-directional
Antenna Connectors 2 RP-SMA female
Ethernet Interface
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3bz for 2.5GBaseT
IEEE 802.3af for PoE
IEEE 802.3at for PoE
IEEE 802.3az for Energy-Efficient Ethernet
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
10/100/1000BaseT(X) Ports (RJ45 connector) 1
PoE Ports (10/100/1000/2500BaseT(X), RJ45 connector) 1
Ethernet Software Features
Management DHCP Server
DHCP Client
DNS
HTTP
IPv4/IPv6
LLDP
SMTP
SNMPv1/v2c/v3
Syslog
TCP/IP
UDP
VLAN
MXconfig
Routing Port forwarding
Static Route
NAT
Security HTTPS/SSL
RADIUS
SSH
Certificate Management
Time Management SNTP Client
Firewall
Filter ICMP
MAC address
IP protocol
Port-based
Wi-Fi ACL
Client Isolation
Serial Interface
Console Port RS-232
8-pin RJ45
USB Interface
Storage Port USB Type A (for ABC-02 use only)
LED Interface
LED Indicators PWR1, PWR2, PoE, SYS, 2.4G, 5G
Input/Output Interface/th>
Digital Inputs 2
Max. input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0
Alarm Contact Channels Relay output with current carrying capacity of 1 A @ 24 VDC
Buttons Reset button
Physical Characteristics
Housing Metal
IP Rating IP30
Dimensions 45 x 130 x 100 mm (1.77 x 5.12 x 3.94 in)
Weight 755 g (1.7 lb)
Installation DIN-rail mounting
Wall mounting (with optional kit)
Power Parameters
Input Current 12-48 VDC, 2-0.5 A
Input Voltage 12 to 48 VDC
Redundant dual inputs
48 VDC Power-over-Ethernet
Power Connector 1 removable 8-contact terminal block(s)
Power Consumption 24 W (max.)
Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
EMC EN 61000-6-2/-6-4
EN 55032/35
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 30 A/m
Safety IEC 62368-1
UL 62368-1
Vibration IEC 60068-2-6
Radio EN 300 328, EN 301 489-1/17, EN 301 893, FCC, MIC, NCC, RCM, SRRC, KC
MTBF
Time 2,407,106 hrs
Standards Telcordia Standard SR-332
Warranty
Warranty Period 5 years

Ordering Information

Model Name Band Standards Operating Temp.
AWK-3262A-UN UN 802.11a/b/g/n/ac/ax -25 to 60°C
AWK-3262A-UN-T UN 802.11a/b/g/n/ac/ax -40 to 75°C
AWK-3262A-US US 802.11a/b/g/n/ac/ax -25 to 60°C
AWK-3262A-US-T US 802.11a/b/g/n/ac/ax -40 to 75°C

Accessories (sold separately)

Antennas
ANT-WSB-PNF-12-02 12 dBi at 2.4 GHz, N-type (female), single-band directional antenna
ANT-WSB5-PNF-16 16 dBi at 5 GHz, N-type (female), single-band directional antenna
ANT-WDB-ONM-0707 07 dBi at 2.4 GHz and 07 dBi at 5 GHz, N-type (male), dual-band omnidirectional antenna
ANT-WDB-PNF-1011 10 dBi at 2.4 GHz and 11 dBi at 5 GHz, N-type (female), dual-band directional antenn
ANT-WDB-ONF-0709 7 dBi at 2.4 GHz or 9 dBi at 5 GHz, N-type (female), dual-band, omnidirectional antenn
ANT-WDB-ANM-0306 3 dBi at 2.4 GHz or 6 dBI at 5 GHz, N-type (male), omnidirectional antenna
ANT-WDB-ARM-02 2 dBi at 2.4 GHz or 2 dBi at 5 GHz, RP-SMA (male) omnidirectional rubber-duck antenna
ANT-WDB-ARM-0202 2 dBi at 2.4 GHz or 2 dBi at 5 GHz, RP-SMA (male), dual-band, omnidirectional antenna
ANT-WSB-AHRM-05-1.5m 5 dBi at 2.4 GHz, RP-SMA (male), omnidirectional/dipole antenna, 1.5 m cable
MAT-WDB-CA-RM-2-0205 2.4/5 GHz, ceiling antenna, 2/5 dBi, MIMO 2x2, RP-SMA-type (male)
MAT-WDB-DA-RM-2-0203-1m 2.4/5 GHz, desktop antenna, 2/3 dBi, MIMO 2x2, RP-SMA-type (male), 1 m cable
MAT-WDB-PA-NF-2-0708 2.4/5 GHz, panel antenna, 7/8 dBi, MIMO 2x2, N-type (female)
ANT-WDB-ANM-0502 5 dBi at 2.4 GHz or 2 dBI at 5 GHz, N-type (male), omnidirectional antenna
Wireless Antenna Cables
A-CRF-RFRM-R4-150 Wireless antenna cable with RP-SMA (female) to RP-SMA (male) connectors, magnetic base, RG-174 type, 1.5 m
A-CRF-RMNM-L1-300 N-type (male) to RP SMA (male) LMR-195 Lite cable, 3 m
A-CRF-RMNM-L1-600 N-type (male) to RP SMA (male) LMR-195 Lite cable, 6 m
A-CRF-RMNM-L1-900 N-type (male) to RP SMA (male) LMR-195 Lite cable, 9 m
Surge Arrestors
A-SA-NMNF-02 0 to 6 GHz, N-type (male) to N-type (female) surge arrester
A-SA-NFNF-02 0 to 6 GHz, N-type (female) to N-type (female) surge arrester
Wireless Terminating Resistors
A-TRM-50-NM 50-ohm termination resistor with N-type male connector
Cables
CBL-RJ45F25-150 8-pin RJ45 to DB25 female serial cable, 1.5 m
CBL-RJ45F9-150 8-pin RJ45 to DB9 female serial cable, 1.5m
Wall-Mounting Kits
WK-35-05 Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm), 6 NYLOK screws
Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.