Advantech BB IMC-782-SFP

also known as iMcV 856-14201

The IMC-782-SFP media converter connects a host/remote Ethernet network over a fiber optic or CAT5 copper connection. It combines 10/100/1000Mbps to Gigabit fiber media conversion with an advanced feature set including OAM (operation, administration, and management), extra-tagging, and Ethernet type control functions for network management and troubleshooting. Administrators can observe the end-points over the fiber segment between them as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile Gigabit solution.

The IMC-784I-SFP comes with two SFP ports for the providers' network connection and two fixed 10/100/1000Base-T copper ports with four distinct DIP switch selectable configurations: 1+1 uplink protection revertive mode, 1+1 uplink protection non-revertive mode, a 4-port Gigabit switch, and a dual copper to fiber SFP media/mode converter. The software management software for IMC-780 series, iView2, allows users to perform remote configuration and alerts administrators to any potential problems on the long-haul fiber run, providing vital information on link condition and reporting data traffic statistics.

Specifications

Technical
	Supports Gigabit copper and fiber SFPs
	IEEE 802.3u, 802.3ab, 802.3z
	SFP—MSA compliant
	Supports 802.3ah OAM (Operation, Administration & Management)
	802.1ad Extra Tagging (Q-in-Q)
	802.3 1Q VLAN
	AutoCross for MDI/MDIX
	Supports diagnostic LEDs
	Hot-swappable architecture
	SNMP V1 and V2c compatible
	Includes loopback test modes
	Supports Link Fault Pass Trough
	1+1 Uplink Protection (IMC-784I-SFP)
Environment
Operating Temperature	0 to +50 °C (+32 to +122 °F) (IMC-782-SFP)
	-40 to +85 °C (-40 to +185 °F) (IMC-784I-SFP)
Storage Temperature	-40 to +85 °C (-40 to +185 °F)
Operating Humidity	5 ~ 95% (non-condensing)
	0 ~ 10,000 ft. altitude
MTBF	522,644 Hours
Mechanical
Dimensions (H x W x D)	10.74 x 2.0 x 7.05 cm (4.19 x 0.78 x 2.75 in)
Weight	0.136 kg (0.30 lb) (IMC-782-SFP)
	0.11 kg (0.24 lb) (IMC-784I-SFP)
Certifications
	FCC Class A
	CE, UL/cUL
	CSA (IMC-782-SFP)



* Simple Network Management Protocol-based element management software.
To configure, update, manage and monitor from a central location

Ordering Information

10/100/1000 Mbps Managed Fiber Series

Part Number	Also Known As	Optical Mode	Distance	Optical Connector
IMC-782-SFP	856-14201	Various	Various	1 x SFP
IMC-784I-SFP (Wide Temp.)	858-18121	Various	Various	2 x SFP



* SFP fibers sold separately – available at www.advantech.com